Medion GoPal E5270, GoPal E5470, MD98935, MD98938 Instruction Manual
12,7 cm / 5“ Navigation System
MEDION® GoPal
®
E5x70
Instruction Manual
Table of contents
1. About these Instructions ............................................................................. 5
1.1. Symbols and Key Words Used in these Instructions ..................................5
1.2. Proper Use .................................................................................................................6
1.3. Information about Conformity ......................................................................... 6
2. Safety Instructions ....................................................................................... 7
2.1. Dangers for children and people with reduced ability to operate
electronics ................................................................................................................. 7
2.2. Operational Safety ..................................................................................................7
2.3. Never carry out repairs yourself .......................................................................8
2.4. Data Security ............................................................................................................8
2.5. Operating Environment........................................................................................8
2.6. Ambient Temperature .......................................................................................... 9
2.7. Electromagnetic Compatibility ......................................................................... 9
2.8. Connection ..............................................................................................................10
2.9. Cabling .....................................................................................................................10
2.10. Battery Operation .................................................................................................10
2.11. Maintenance ...........................................................................................................11
2.12. Care of the Display ..............................................................................................11
3. Supplied Items ........................................................................................... 12
4. Views .......................................................................................................... 13
4.1. Front Components ...............................................................................................13
4.2. Back Components ................................................................................................14
4.3. Top Components ..................................................................................................14
4.4. Left Components ..................................................................................................15
5. Initial Set up ............................................................................................... 16
5.1. Charging the Battery ...........................................................................................16
5.2. Power Supply .........................................................................................................17
5.3. Switching on the Device ....................................................................................17
6. General Operating Instructions ................................................................ 20
6.1. Switching on/off the Device .............................................................................20
7. Security ....................................................................................................... 22
7.1. Storing the password and the information note ......................................22
7.2. Making settings ....................................................................................................23
7.3. SuperPIN and UUID ..............................................................................................24
7.4. Making subsequent settings ..........................................................................25
8. Resetting the Navigation System ............................................................ 27
8.1. Reset ..........................................................................................................................27
8.2. Switching the Device off Completely / Hard Reset ...................................27
9. Navigation .................................................................................................. 28
9.1. Safety Instructions for Navigation ..................................................................28
1 of 82
9.2. Aerial Orientation .................................................................................................30
9.3. Mounting the Car Holder ...................................................................................30
9.4. Attaching the Navigation System ..................................................................31
9.5. Connecting the Car Adapter ............................................................................32
9.6. Starting the Navigation Software ...................................................................33
10. Warning Function for Traffic Monitoring Points (optional) .................... 34
11. Speech Commands (optional)................................................................... 37
12. Bluetooth (optional) .................................................................................. 40
12.1. Starting the Bluetooth Application ...............................................................40
12.2. Overview of the Main Screen ...........................................................................40
12.3. Pairing the Navigation Device and the Mobile Phone ............................41
12.4. Accepting incoming calls ...................................................................................42
12.5. Making Calls ...........................................................................................................43
12.6. Show and Read Out Incoming Messages ...................................................43
12.7. During a Call ...........................................................................................................44
13. MP3 Player (optional) ................................................................................ 45
13.1. Overview of the Main Screen ...........................................................................45
13.2. Select a Title and Move it into the List of Favourites ...............................46
13.3. List of the established bookmarks ..................................................................47
14. Picture Viewer (optional) .......................................................................... 48
14.1. Operating the Picture Viewer ...........................................................................48
14.2. Main Screen ............................................................................................................48
15. Travel Guide (optional) .............................................................................. 51
15.1. Overwiev of the Main Screen ...........................................................................51
16. Where am I? (optional) .............................................................................. 53
17. Eco Expert (optional) ................................................................................. 54
17.1. Overwiev of the Main Screen ...........................................................................54
18. Alarm Clock (waking function) (optional) ............................................... 56
18.1. Overview of the Main Screen ..........................................................................56
18.2. Description of the Interfaces ...........................................................................56
18.3. Selecting an Alarm Signal .................................................................................58
18.4. Setting the Volume .............................................................................................59
18.5. Snooze Function ..................................................................................................60
19. Sudoku (optional) ...................................................................................... 61
19.1. Main Screen ............................................................................................................61
19.2. Description of the Switch Fields .....................................................................61
19.3. Overview of the Game Field .............................................................................62
20. Traffic Rules Europe ................................................................................... 63
21. Special CleanUp Function ......................................................................... 64
22. Synchronisation with the PC ..................................................................... 66
22.1. Installing Microsoft® ActiveSync® ..................................................................66
2 of 82
22.2. Connecting with the PC .....................................................................................67
22.3. Working with Microsoft® ActiveSync® ..........................................................69
23. GPS (Global Positioning System) .............................................................. 70
24. TMC (Traffic Message Channel) (optional) ............................................... 71
24.1. Premium TMC (optional) ...................................................................................71
25. Working with Memory Cards ................................................................... 72
25.1. Inserting Memory Cards .....................................................................................72
25.2. Removing Memory Cards ..................................................................................72
25.3. Additional Card Material ...................................................................................73
26. FAQ .............................................................................................................. 74
27. Customer Service ...................................................................................... 75
27.1. Faults and Possible Causes ................................................................................75
27.2. Additional Support...............................................................................................75
27.3. Transport ..................................................................................................................76
28. Recycling and Disposal.............................................................................. 76
29. Specifications ............................................................................................ 77
30. Model Overview ........................................................................................ 77
31. Regulatory information ............................................................................ 78
31.1. Regulations statements ......................................................................................78
32. FCC Compliance Statement ....................................................................... 79
33. Legal notice ................................................................................................ 79
34. Index ........................................................................................................... 80
3 of 82
Personal Data
Take a note for your proof of ownership:
Serial Number ..........................................................................................................................
Password ..........................................................................................................................
Information note ..........................................................................................................................
SuperPIN ..........................................................................................................................
UUID ..........................................................................................................................
Date of Purchase ..........................................................................................................................
Place of Purchase ..........................................................................................................................
Please record the serial number into any appropriate guarantee documents.
You will enter your own password and information note using the Security Function.
The SuperPIN and the UUID will be provided following the activation of the Security
Function. See page 22.
Quality
The components used have been selected to provide a product that has a high level
of functionality and is user friendly, safe and reliable. A well-balanced hardware
and software design allows us to offer you a technologically advanced navigation
system, which is both practical and enjoyable to use.
Service
Our customer care is there to provide support and assistance whenever you have
questions or are experiencing problems.
This manual contains a section specific to Customer Service starting on page 75.
Microsoft®, MS-DOS®, and Windows are registered trademarks of Microsoft
Corporation in the U.S. and other countries. The names of actual companies and
products mentioned herein may be the trademarks of their respective owners.
4 of 82
1. About these Instructions
Read these operating instructions carefully before using the appliance
for the first time. Note the warnings on the unit and in the operating
instructions.
Always keep the operating instructions close to hand. If you sell
the equipment or give it away, make sure you also hand over these
instructions and the warranty card.
1.1. Symbols and Key Words Used in these
Instructions
DANGER!
Warning of immediate risk of fatal injury!
WARNING!
Warning: possible mortal danger and/or serious
irreversible injuries!
CAUTION!
Warning: possible light or moderate injuries!
CAUTION!
Please follow the guidelines to avoid property damage.
PLEASE NOTE!
Additional information on using the device!
PLEASE NOTE!
Please follow the guidelines in the operating instructions.
WARNING!
Warning: risk of electric shock!
• Bulleted item/information on operating steps and results
Tasks to be performed
5 of 82
1.2. Proper Use
The device is designed as a receiver of GPS signals (position data provided from
satellites) for navigation and the determination of location. The device is intended
for private use only and not for industrial/commercial use.
Please note that we shall not be liable in case of improper use:
• Do not modify the device without our consent and do not use any auxiliary
equipment which we have not approved or supplied.
• Use only spare parts and accessories which we have supplied or approved.
• Follow all the instructions in these directions for use, especially the safety
information. Any other use is deemed improper and can cause personal injury or
damage to the product.
• Do not use the device in extreme ambient temperatures and conditions.
1.3. Information about Conformity
The following remote equipment has been supplied with this device:
• Bluetooth (only with model E5470) (optional)
The company declares herewith that these devices are in agreement with the
fundamental requirements and the other relevant terms of the 1999/5/EG
Guideline.
This device fulfils the basic requirements and the relevant regulation of the
Ecodesign Guideline 2009/125/EG. Complete declarations of conformity are
available under www.medion.com/conformity.
6 of 82
PLEASE NOTE!
You can find detailed operating instructions for the sat nav on the CD/
DVD, as well as via the online help for the device.
2. Safety Instructions
2.1. Dangers for children and people with reduced
ability to operate electronics
• Do not allow small children to play unattended with electrical
equipment. Children are incapable of judging potential risks
properly.
• Keep the appliance and its accessories out of reach of children.
DANGER!
Keep plastic packaging out of reach of children. There is a
risk of suffocation.
2.2. Operational Safety
• Please read this section carefully and follow all the instructions
provided. This will help ensure reliable operation and prolong the
life of your appliance.
• Keep the packaging and the user instructions for future reference
or enquiries at a later date. If you pass the article on to another
person, you should pass on these instructions.
• Never open up the housing of the appliance. This contains no user-
serviceable parts. If the housing is opened there is a danger of
electric shock.
• Please operate your navigation system with an approved power
supply only.
• Do not place any objects on the appliance and do not exert any
pressure on the display. Otherwise there is a danger that the screen
will break.
• To avoid damage, do not touch the screen with sharp objects. We
recommend using only the stylus provided or finger when using
the touch-screen functionality of the product.
• There is a risk of injury if the display breaks. If this should occur, use
protective gloves to pack the broken parts and contact customer
support to arrange for disposal. Then wash your hands with soap,
since there is a possibility that chemicals may have escaped.
• Switch the appliance off immediately, or do not switch it on, and
contact Customer Service.
7 of 82
• If the housing of the appliance becomes damaged or liquid may
have leaked into it the components must be checked by Customer
Service in order to avoid damage!
2.3. N ever carry out repairs yourself
WARNING!
Never try to open or repair the appliance yourself.
• Please contact our Service Centre if you encounter technical
problems with your appliance.
• In the event a repair becomes necessary, please use Medion
authorised Service Partners. The address can be found on the back
of your guarantee card or online at www.medion.co.uk
2.4. Data Security
CAUTION!
Every time you update your data make back-up copies on
an external storage medium. The supplier does not assume
liability for data loss or damage to data storage units, and no
claims will be accepted for damages resulting from the loss of
data or consequential losses.
2.5. O perating Environment
Failure to follow these instructions may lead to your appliance being
damaged. In cases where products are damaged as a result of misuse
or neglect the associated guarantee will be considered void.
• Keep your navigation System and all connected devices away from
moisture and avoid exposure to dust, heat and direct sunlight,
especially in the car.
• Make sure you prevent your appliance from getting wet, e.g. from
rain and hail, at all times. Please note that moisture can even build
up inside a protective pouch as a result of condensation.
• Avoid heavy vibrations and shaking.
• Please note the device should be installed vertically, this will
ensure that the device remains secure within its holder.
8 of 82
2.6. Ambient Temperature
• The appliance will operate effectively at an ambient temperature
of between +32°F and +95°F (0 °C and 35 °C) and at a relative
humidity of between 10 % and 90 % (non-condensing).
• In the powered down state the appliance can be stored at between
-4°F and +140°F (-20 °C + to 60 °C).
• Store the appliance in a safe location, away from high
temperatures (e.g. when parking or from direct sunlight).
2.7. Electromagnetic Compatibility
• When connecting additional or other components the
“Electromagnetic Compatibility Directive” (EMC) must be adhered
to. Please note that only screened cable (maximum 10ft) should be
used with this appliance.
• For optimal performance, maintain a distance of at least 10 ft. from
sources of high-frequency and magnetic interference (televisions,
loudspeaker systems, mobile telephones etc.).This will help to
avoid malfunctions and loss of data.
• Electronic devices emit electromagnetic waves during operation.
These emissions are harmless, but can interfere with other devices
operated in close proximity.
While our devices are tested and optimised for electromagnetic
compliance in our laboratories, interference during operation
may still occur in the device itself and with other devices in its
proximity.
Should such interference occur, try to eliminate it by adjusting the
positions of and the distances between the devices.
Before driving, please ensure that the electronic systems of the car
are working properly.
9 of 82
2.8. Connection
When connecting your appliance it is important to observe the following instructions:
2.8.1. Power supply through Car Adapter
• The car adapter should only be connected to the lighter socket
of a car (car battery = DC 12V
you are in any doubt about the power source in your car, please
contact your car manufacturer.
, truck battery = DC 24V ). If
2.9. Cabling
• Arrange cables so that they do not cause unnecessary obstruction
or risk entanglement or snaring. E.g. ensure that the cables cannot
be trod on, or tripped over.
• Do not put any objects on the cable, because it could be damaged
if you do so.
• Do not use any force and pay attention to the correct orientation of
the plug when connecting the cables and plugs.
• Do not permit any great forces to be exerted on the plug
connections, from the side, for example. This will lead to damage in
and to your device if you do so.
• Avoid short circuiting and broken cable by not crushing or
bending it sharply.
2.10. Battery Operation
Your appliance is powered by an integrated battery. In order to prolong the life and efficiency of your battery and ensure safe operation,
follow the instructions below:
• Batteries cannot withstand excessive heat. Take care to avoid
overheating of appliance and the integrated battery. Failure to
comply with this instruction may lead to damage to or, even
explosion of the battery.
• Only use the car adapter to charge the battery.
• The batteries are special category waste. When disposing of the
appliance ensure that this is done correctly. Contact Customer
Service for more details.
10 of 82
2.11. Maintenance
CAUTION!
There are no user-serviceable parts which require cleaning
inside the housing of the appliance.
You can prolong the life of the appliance by taking the following simple steps:
• Always remove the power plug and all connecting cables before
cleaning.
• Clean the appliance only with a damp, lint-free cloth.
• Do not use solvents, caustic or gaseous cleaners.
2.12. Care of the Display
• Avoid scratching the display surface as this may be easily
damaged. We recommend using a display protection film (mylar)
to prevent scratching of the screen. Please contact your nearest
dealer for this accessory. The plastic on the display at delivery is
purely for protection during transportation!
• Ensure that no traces of water remain on the screen. Water can
cause irreversible discoloration.
• Use only a soft, lint-free cloth to clean the screen.
• Do not expose the screen to strong sunlight or ultraviolet
radiation.
PLEASE NOTE!
Protective film is on the surfaces to protect the device against scratching
during production and transportation. Pull off all the film after you have
set up the device correctly and before bringing it into operation.
11 of 82
3. Supplied Items
Please check the condition of items supplied and check for missing items using the
list below. If you find your package to be incomplete, please forward to us all claims
for missing items within 14 days from the date of purchase. The package should
include the following:
• Navigation system
• Power cable for cigarette lighter
• Car holder and cradle
• USB cable
• CDs/DVDs with navigation software
• Instruction manual
WARNING!
Keep the packaging materials, such as plastic bags away
from children as there is a danger of suffocation.
12 of 82
4. Views
4.1. Front Components
1
2
3
Ref. Component Description
Battery Charge
1
Indicator
The LED will flash orange during the charging process.
It will shine constant green when the accumulator is
fully charged.
Displays the output of your appliance. Tap on the screen
with your finger, a stylus or a „blunt“ tip to select menu
commands or enter data.
CAUTION!
2 Touch Screen
To avoid damaging the screen, do not
touch it with square-edged or sharp
objects. For example, use a blunt stylus.
In many cases, it is possible to also
operate the device using a finger.
3 Microphone (only with model E5470)
13 of 82
4.2. Back Components
4
Ref. Component Description
4 Loudspeaker Plays back music, language statements and warnings.
4.3. Top Components
5
Ref. Component Description
Turn the device on or off by pressing and holding the
On/Off button. You will switch to the stand-by mode or
reactivate the device by quickly pressing the button.
5
14 of 82
On-/ Off
button
4.4. Left Components
67
Ref Component Description
Memory card
6
insertion slot
with cover
microUSB-
7
Connector
PLEASE NOTE!
Close the cover again after using the memory card each time.
Accepts an optional memory card for removable storage.
Connection to external power supply as well as connection
for connecting to a PC by means of the USB cable (for data
matching)
15 of 82
5. Initial Set up
The following is a step by step guide to assist in the initial Set-up of the navigation
system. Start by removing the protective plastic from the display.
5.1. Charging the Battery
The battery of your navigation system can be charged in the following ways:
• Using the supplied car adapter or
• using a suitable USB cable.
CAUTION!
It may be necessary to initially charge the battery for a
considerable period of time prior to commencing and running
through the initial installation, this is dependent on the level of
charge held at the time by the internal battery.
Please observe the following notes relating to the battery:
• The charging status display LED will flash orange until the
navigation system is charged. If possible, do not interrupt the
charging process until the battery is fully charged. This may take a
few hours. The charging status LED will shine constant green if the
battery has a high level of charge. Leave the device charging for 20
further minutes, to ensure the battery is fully charged.
• The navigation system can be used during the charging process,
but the power supply must not be interrupted during initial set-up.
• Leave the external power supply connected to the navigation
system for around 24 hours, so that the backup battery also
charges-up fully.
• The external power supply can remain connected; this is
recommended for continuous operation. However, the mains
adapter (optional) must remain switched on whenever it is
connected to the navigation system.
• Even after a power source has been connected to the device it
may take several minutes until the device is once again ready to
operate again, this occurs if the charging state of the battery is
exceptionally low. The battery will continue to be charged if the
power supply is connected and the device is switched off.
• The battery will be charged, even if the device is switched off
completely.
16 of 82
5.2. Power Supply
5.2.1. Car Adapter
Plug the jack of the connection cable into the corresponding receptor of your
navigation system.
Insert the power adapter into the cigar lighter socket ensuring, that it will not
lose contact while driving. This could cause a malfu.
5.2.2. Alternative Possibility of Charging the Battery
The battery will charge as soon as you connect your navigation device to a
switched-on PC or notebook by means of a USB cable.
No additional software or updates is required for your PC to perform this function.
Do not interrupt the charging process if possible during the initial charge.
PLEASE NOTE!
The brightness will be adjusted downwards, if necessary, if a USB
connection is being set up when the device is switched on.
It is recommended to set the device to the stand-by mode, in order to
shorten the charging time by USB.
5.3. Switching on the Device
You will switch your navigation device on or off again completely by pressing
the On/Off key (approx. 1 sec.).
You can switch your navigation device into standby mode and then back on
again by briefly pressing (> 0.5 sec.) the On/Off switch.
The navigation system will start the first setting up automatically. Select the
language that you require first. The brand logo will appear and your device will
display the entry screen after a few seconds.
17 of 82
The following options will be available to you subsequently:
• You will receive a short introduction about bringing your navigation device and
the navigation software through the
in the vehicle, entering and administering navigation destinations, general
instructions for use, etc. are described here, among other aspects.
• You will start the Settings assistant for the configuration of the basic settings of
your navigation software by means of the
• You will reach the Main menu of your navigation software by means of the
switch.
• You will have various possibilities of establishing your route and starting the
navigation by means of the icon:
switch. The mounting
switch.
18 of 82
5.3.1. Main Views
You will find an overview of the different main views of the Main menu here.
Button Description Main Screen
Viewing maps
Navigation menu
Extras
Settings
19 of 82
PLEASE NOTE!
You will not be able to select the Navigation menu or the settings if the
navigation software does not find any map files in the device or on a
memory device. Then the Extras menu will appear automatically.
Brief pressure on the on/off button will be enough to switch the device
on or off, provided that your navigation system is connected to an
external source of electricity or is running in battery operation (standby
mode).
You can adjust the period of operation to suit your needs using the
Settings button on the main screen of your device. Your device is
delivered in a status in which it will not switch off independently.
Press and hold the On/Off key, to completely switch off the device.
No data will be lost as data is stored in the internal memory. The starting
process will only last slightly longer.
Your navigation system will use a low amount of electricity and the batteries will be
discharged, even when in standby mode.
The final installation of the navigation software will take place automatically from
the internal memory, during the initial set up, if your device has already been
equipped with the basic data of the navigation software at the factory. Follow the
instructions on the screen.
An optional memory card must always be inserted in the device while the
navigation system is being used.
It will be necessary to carry out a Reset to restart the navigation system if the
memory card has been removed (see page 27).
Please also read the chapter Navigation starting on page 28.
6. General Operating Instructions
6.1. Switching on/off the Device
Your device will be in its normal operating state after the initial set up. You can
activate and deactivate your device with the On-/Off switch.
To start your navigation system press briefly the On-/Off switch.
PLEASE NOTE!
Your device is delivered in a status in which it will not switch off
independently. You can adjust the period of operation to suit your needs
using the Settings button on the main screen of your device.
Your navigation system will use a low amount of electricity and the
batteries will be discharged, even when it is in the standby mode.
20 of 82
To switch off your navigation system briefly press the On-/Off switch .
The following screen will appear:
You have three possible choices:
Button Description
Cancel/Back
Return to previous view with this key, if you have accidently called up
this screen.
Standby Mode (Energy saving mode)
The device will go into Standby Mode if this key is clicked.
Reset
You can carry out a reset by clicking this key.
The device will go into the Standby mode automatically after a few seconds if you
do not want to select any of these three possibilities.
For further settings within the Standby mode also see the chapter on “21. Special
CleanUp Function”, page 64, point 8.
This display will also appear after the delay period of a few seconds has expired, if
you have activated the DC AutoSuspend Comfort Function.
21 of 82
7. Security
You have the possibility of protecting your device against external access by means
of this function. Some one-off settings will have to be made before you will be able
to use this function. Proceed as follows to do this:
7.1. Storing the password and the information note
Go to Settings and then to Device settings by means of the main display.
Click on Security , in order to start the respective function. The following display
will appear:
Click on , in order to enter a password.
A keyboard will appear. Enter a password with it.
PLEASE NOTE!
The password must consist of at least 4 symbols. Use a combination of
letters (A – Z) and numbers (0 - 9). Keep the password in a safe place.
Confirm the password with the
Enter the password in the second field to reconfirm it and in order to avoid
potential careless mistakes.
symbol after you have entered it.
PLEASE NOTE!
The password will be displayed in the form of small stars (****).
An additional text field will appear after you have entered the password. Enter
an information note here that will serve as a support for remembering your
password. You will be able to call up this information if you have forgotten or
mislaid the password.
22 of 82
7.2. Making settings
The following selection window, through which you will make the settings for
the Security Function, will appear after you have entered the password and the
information note successfully.
Button Description
Set here whether the device should request the password after a
hard reset.
Set here whether the device should request the password after a
restart.
Set here whether the device should request the password after
the device has been switched on from the Standby mode.
23 of 82
7.3. SuperPIN and UUID
The SuperPIN and the UUID (Universally Unique IDentifier = definite device
identification) will appear on the display after you have confirmed the settings .
PLEASE NOTE!
Record this data in your Operating Instructions and keep them in a safe
place.
You will need this information if you have entered the password
incorrectly 3 times. The navigation device can then only be released
with this information.
24 of 82
7.4. Making subsequent settings
Start the Security Function if you have already entered a password and would like
to make a subsequent setting or to change the password. The following display will
appear:
Button Description
Change the password or the information text
Authentication settings (see page 23, Making
settings)
Display SuperPIN and UUID (see page 24)
Reverses the complete security function. All security
settings and passwords will have been deleted after this
function has been carried out. You will have to enter
and confirm your password again to be able to carry out
the security function.
25 of 82
Loading...