Page 1
xls series
l e g e n d a r y
loudspeaker
McIntosh Loudspeaker Engineers designed the new McIntosh XLS speaker family for
maximum flexibility and system scalability. The concept and “Voice” of the XLS series
begins with the XLS320 bookshelf speaker, a very compact speaker with outstanding
acoustical output. The XLS320 employs a second generation five tweeter Bessel Array
for uncompressed, high power reproduction of high frequencies with both delicacy and
natural detail. The five tweeter array is combined with a precision 6.5” woofer/midrange
driver then connected to a precision crossover network, all of which are mounted in a
compact extruded aluminum enclosure. This aluminum enclosure is strong, light, and
antiresonant which allows the XLS320 to be both small and have the internal volume
necessary for proper bass tone.
The larger XLS340, XCS350 and XLS360 models contain the same midrange and tweeter
components of the XLS320 so they all speak with a common “Voice.” These XLS speakers
add larger woofers with increased cabinet volume for additional bass extension and power
handling capability. Completing the XLS family is the XLS112 a 400 watt internally
amplified subwoofer.
Most XLS Series models can be positioned on the floor, a shelf or mounted on-wall or
in-wall with the addition of an in-wall kit. Adding to the XLS’s versatility is a rear panel
“imaging jumper” that selects left, center, or right placement for proper mirror imaging.
“equally at home
in home theater and
audiophile stereo
systems”
Five Tweeters configured in a Bessel
Array are used for additional high
frequency power handling and clarity.
XLS common “Voice” design assures
compatibility between models.
Rear panel position adjustments allow
for perfect imaging in any position.
Light, thin and strong extruded
aluminum cabinets allow for a shallow
design with extreme clarity.
Page 2
XLS Series
loudspeaker
XLS IN-WALL INSTALLATION XLS ON-WALL INSTALLATION
2
3
1
“XLS common ‘Voice’
design assures compatibility
between models”
SPEAKING WITH A COMMON VOICE
Any combination of XLS speakers can be used in any location
with a common result; realistic sound image throughout the
listening room. Even the most challenging rooms have a
McIntosh XLS speaker solution that will yield beautiful sound.
In-wall, bookshelf and floor-standing models may be combined
to match any room construction and deliver a musical and unified
audio presentation. Available in natural cherry, red cherry, black
ash or brushed champagne side trim. Handcrafted with pride at
the McIntosh facility in Binghamton, NY, USA.
REAR PANEL IMAGING JUMPER
The XLS Series of loudspeakers have a rear panel jumper switch
that allows the choice of left, center or right speaker placement
for proper imaging.
4
1. XLS340 AND XCS350 3-WAY LOUDSPEAKER
The XLS340 and the XCS350 contain the exact same “VOICE”
as the XLS320 with the addition of two 8” woofers for expanded
bass reproduction. The XLS340 floor standing or in-wall speaker
may be combined with the XCS350 as a matching center
channel. Like the XLS320, the XLS340 and XCS350 share the
same shallow 3-3/4” depth and placement options and are as
versatile as your imagination. The XCS350 may be used vertically
or horizontally with equally satisfying results.
2. XLS360 3-WAY LOUDSPEAKER
The full size, floor standing XLS360 is designed for free
standing use and floor stands are included. Dual 10” woofers
with enormous magnet structures provide prodigious bass.
3. XLS320 2-WAY LOUDSPEAKER
The XLS series begins with the XLS320, a compact speaker that
can be placed on a bookshelf, on a stand, or mounted on a wall.
With a depth of only 3-3/4” the XLS320 can be installed in a wall
as well. This optional in-wall mounting kit includes a mesh metal
cover paintable to match wall color and room décor.
4. XLS112 POWERED SUBWOOFER
The XLS112 Powered Subwoofer is compact yet powerful,
housing a McIntosh 400 Watt amplifier. The 12” woofer provides
effortless, deep bass extension.
BESSEL FUNCTION TWEETER ARRAY
The five individual tweeters and their phase relationships are
adjusted so that the array acts as a high frequency point source
with a broad dispersion pattern. In addition, the array greatly
increases power handling for high frequencies. The Bessel Array
can be used in either the vertical or horizontal position without
compromising sonic integrity.
UNIFIED “VOICING”
Combining the Bessel Tweeter Array with a new and exceedingly
precise crossover, McIntosh Loudspeaker Engineers established
a structure able to generate a realistic sound image throughout
the listening room. This determines the “voice” or sound
character of the speaker and is the foundation of the family of
XLS loudspeakers.
PATENTED LD/HP® TECHNOLOGY
McIntosh woofers and midranges feature the patented LD/HP
motor structure. This design utilizes aluminum shorting rings at
both ends of the pole piece to extend and linearise the magnetic
field around the voice coil. Distortion is reduced by 10dB or
more. These rings also increase voice coil heat dissipation and
the power handling of the speaker.
XLS IN-WALL INSTALLATION
Install the XLS320, XLS340 or the XCS350 in a wall with the
optional in-wall installation kit. The white metal grill is paintable
to match any wall color and blend into the room’s décor.
Pictured are the XLS340’s.
XLS ON-WALL INSTALLATION
If you prefer your speakers off the floor and on a wall, the
XLS320, XLS340 and the XCS350 include on-wall mounting
brackets. Shown here is the XLS340 mounted on a wall.
XLS FINISHES
XLS speaker grills are black acoustic fabric with side trim
options of brushed champagne, red cherry, natural cherry and
black ash.
BRUSHED
CHAMPAGNE
RED
CHERRY
NATURAL
CHERRY
BLACK ASH
Page 3
XLS Series
loudspeaker
LOUDSPEAKER
MODEL
XLS320 2-WAY
SPEAKER
XCS350 3-WAY
SPEAKER
XLS340 3-WAY
SPEAKER
XLS360 3-WAY
SPEAKER
IMPEDANCE
NOMINAL
8-Ohms all drivers one 6.5” five 1” dome
8-Ohms all drivers two 8” five 1” dome
8-Ohms all drivers two 8” five 1” dome
8-Ohms all drivers two 10” five 1” dome
MAGNETIC
SHIELDING
WOOFERS MIDRANGE TWEETERS ANECHOIC
Bessel Array
one 6.5”
Bessel Array
one 6.5”
Bessel Array
one 6.5”
Bessel Array
RESPONSE
80Hz-34kHz
±2dB
80Hz-34kHz
±2dB
65Hz-34kHz
±2dB
55Hz-34kHz
±2dB
CROSSOVER
FREQUENCY
2kHz 87dB
275Hz,
2kHz
275Hz,
2kHz
2kHz 87dB
SPL
2.8V/1m
87dB
87dB
WEIGHT
DIMENSIONS
(HxWxD)
inch: 15-1/4 x 10-1/2
x 5-1/4 cm: (38.1 x
25.4 x 12.7) 23 lbs.
(10.4kg) net
including base
inch: 10-1/2 x 34 x 6
cm: (25.4 x 86.4 x
15.3) 55 lbs. (24.9kg)
net
including base
inch: 46 x 14-3/4 x 12
cm: (116.8 x 35.6 x
30.5) 65 lbs. (29.5kg)
net
including base
inch: 53-1/4 x 17-1/4
x 13 cm: (134.6 x
43.2 x 30.5) 105 lbs.
(47.6kg) net
WS350 86dB
IN-WALL
LOUDSPEAKER
POWER AMP
SECTION
XLS112
POWERED
SUBWOOFER
4-Ohms all drivers one 8” five 1” dome
POWER AMP
OUTPUT
400W
sine wave
continuous
power
DRIVER
SIZE
12” inch: 15-1/2 x 15 x 15
TOTAL
HARMONIC
DISTORTION
0.03% max
harmonic
distortion
from 250
milliwatts to
400 watts
DIMENSIONS (HxWxD)
WEIGHT
cm: 38.1 x 38 x 38
95 lbs. (43.1kg) net
A-WEIGHTED
S/N RATIO
100dB
below rated
output
one 4”
INPUT
SENSITIVITY
0.4V for
rated output
Bessel Array
POWER
REQUIREMENTS
120V,
50/60Hz at
5A
60Hz-20kHz
±2dB
LOW PASS
FILTER
40-120Hz
variable with
knob on
rear panel
300Hz,
1.5kHz
LEVEL
CONTROL
Variable level
control with
knob on
rear panel
86dB
PHASE
CONTROL
0 or 180
with
switch
on rear
panel
inch: 23-1/2 x 14 x
3-1/2 cm: (59.7 x
35.6 x 9.3) 25 lbs.
(11.3kg) net
CONNECTIONS
Balanced
and Unbalanced
In/Out
www.mcintoshlabs.com
FOR THE CONSUMER’S PROTECTION
In order to ensure the highest level of customer satisfaction, “new” McIntosh products may only be purchased over-the-counter or delivered and installed by an
Authorized McIntosh Dealer. McIntosh products that are purchased over the Internet, by phone or mail order are presumed to be “used” and do not qualify for any
McIntosh Warranty. McIntosh does not warrant, in any way, products that are purchased from anyone who is not an Authorized Dealer or products that have had
their serial number altered or defaced.
35008100 XRT LOUDSPEAKER
Loading...