|
|
|
|
|
|
|
|
|
|
|
GB |
Cordless Screwdriver |
Instruction Manual |
|
|
|
|
|
|
|
|
Visseuse sans fil |
Manuel d’instructions |
|
|
F |
|||
|
|
|
|
|
|
|
Akku-Schrauber |
Betriebsanleitung |
|
|
D |
|||
|
|
|
|
|
|
|
Avvitatrice a batteria |
Istruzioni per l’uso |
|
|
I |
|||
|
|
|
|
|
|
|
Snoerloze schroevendraaier |
Gebruiksaanwijzing |
|
|
NL |
|||
|
|
|
|
|
|
|
Atornillador a batería |
Manual de instrucciones |
|
|
E |
|||
|
|
|
|
|
|
|
Aparafusadora a bateria |
Manual de instruções |
|
|
P |
|||
|
|
|
|
|
|
|
Akku skruemaskine |
Brugsanvisning |
|
|
DK |
|||
|
|
|
|
|
|
|
Sladdlös momentskruvdragare |
Bruksanvisning |
|
|
S |
|||
|
|
|
|
|
|
|
Akku momentskrutrekker |
Bruksanvisning |
|
|
N |
|||
|
|
|
|
|
|
|
Langaton ruuvinväännin |
Käyttöohje |
|
|
SF |
|||
|
|
|
|
|
|
|
Ασύρµατ κατσα ίδι |
δηγίες ρήσεως |
|
|
GR |
|||
|
|
|
|
|
BFT120/BFT120F
BFT121F
1 2
1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 |
|
|
|
|
|
5 |
|
|||||||
|
(C) |
|
|
|
|
E |
|
|
|
|
F |
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
80% - 100% |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
60% - 80% |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
40% - 60% |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10% - 40% |
|
|
|
|
|
orange |
|
|
|
|
|
0% - 10% |
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
E |
4 |
|
|
|
|
F |
5 |
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
80% - 100% |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
60% - 80% |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
40% - 60% |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10% - 40% |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
orange |
|
|
|
|
|
0% - 10% |
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3
7
5
9
7
2
3 |
2 |
1 |
2 |
6 |
4 |
8 |
6 |
10 |
11 |
8 |
12 mm (15/32")
9 mm (3/8")
9
11 |
|
|
|
|
|
|
|
|
|
|
|
|
18 |
|
|
|
|
|
360 |
|
|
|
|
|
|
|
|
300 |
|
|
|
|
|
|
|
14 |
180240 |
|
16 |
|
|
|
|
|
|
120 |
|
|
|
|
|
|
|
|
60 |
|
|
|
|
|
|
|
|
05 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
|
|
|
|
17 |
|
|
|
|
13 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20 |
|
|
|
12 |
|
|
|
13 |
|
|
10 |
|
|
|
|
|
|
|
|
|
|
|
|
15 |
|
|
|
|
|
360 |
|
|
|
|
|
|
|
|
300 |
|
|
|
|
|
|
|
14 |
180240 |
|
16 |
|
|
|
|
|
|
120 |
|
|
|
|
|
|
|
|
60 |
|
|
|
|
|
|
|
|
05 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
|
|
|
|
17 |
|
|
|
|
12 |
|
|
|
|
|
|
|
|
19
14
21
15
3
ENGLISH
Explanation of general view
1 |
Battery cartridge |
8 |
Reversing switch lever |
15 |
Capacity limit of BFT120 (F) |
2 |
Button |
9 |
LED indicator |
16 |
Battery 20°C |
3 |
Red part |
10 |
Graduations |
17 |
Torque N•m (in. lbs) |
4 |
Indicating lamp |
11 |
Adjusting grip |
18 |
Capacity limit of BFT121 (F) |
5 |
Capacity |
12 |
Bit |
19 |
Limit mark |
6 |
Switch trigger |
13 |
Sleeve |
20 |
Brush holder cap |
7 |
Light |
14 |
Revolution angle (°) |
21 |
Screwdriver |
SPECIFICATIONS
Model |
BFT120/BFT120F |
BFT121F |
No load speed (min–1)..................................... |
320 |
340 |
Fastening torque ............................................. |
5 – 12 N•m |
5 – 12 N•m |
Dimensions ..................................................... |
174 mm x 65 mm x 256 mm |
174 mm x 65 mm x 265 mm |
|
(with battery cartridge BH9020) |
(with battery cartridge BH1220) |
Net weight ....................................................... |
1.3 kg |
1.5 kg |
Rated voltage .................................................. |
D.C. 9.6 V |
D.C. 12 V |
|
|
|
•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
•Note: Specifications may differ from country to country.
Intended use
The tool is intended for screw driving in wood, metal and plastic.
Safety hints
For your own safety, please refer to the enclosed safety instructions.
ADDITIONAL SAFETY RULES FOR TOOL
ENB026-1
1.Be aware that this tool is always in an operating condition, because it does not have to be plugged into an electrical outlet.
2.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator.
3.Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations.
4.Hold the tool firmly.
5.Keep hands away from rotating parts.
SAVE THESE INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRIDGE
ENC002-3
1.SAVE THESE INSTRUCTIONSThis manual contains important safety and operating instructions for battery charger.
2.Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
3.CAUTION - To reduce risk of injury, charge only MAKITA type rechargeable batteries. Other types of batteries may burst causing personal injury and damage.
4.Do not expose charger to rain or snow.
5.Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons.
6.To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.
7.Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
8.Do not operate charger with damaged cord or plug - replace them immediately.
9.Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman.
10.Do not disassemble charger or battery cartridge; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
11.To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
12.The battery charger is not intended for use by young children or infirm persons without supervision.
13.Young children should be supervised to ensure that they do not play with the battery charger.
14.If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion.
15.If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight.
4