Owner's Manual
ZV450MW8
DIGITAL VIDEO DISC RECORDER WITH
VIDEO CASSETTE RECORDER
THANK YOU FOR CHOOSING MAGNAVOX.
NEED HELP FAST?
READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE USING
YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.
IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,
YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM
OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
© 2007 Funai Electric Co., Ltd.
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
PRECAUTIONS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Laser Safety
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
The caution marking is located on the rear of the cabinet.
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION: INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1)Reorient or relocate the receiving antenna.
2)Increase the separation between the equipment and receiver.
3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4)Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
Make your contribution to the environment!!!
•Used up batteries do not belong in the dust bin.
•You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details.
For Customer Use:
Read carefully the information located at the back of this unit and enter below the Model No. and Serial No. Retain this information for future reference.
Model No. _____________________
Serial No. _____________________
2EN
PRECAUTIONS
Important Safeguards
1.Read Instructions - All the safety and operating instructions should be read before the appliance is operated.
2.Retain InstructionsThe safety and operating instructions should be retained for future reference.
3.Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4.Follow Instructions - All operating and use instructions should be followed.
5.Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.
6.Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7.Water and MoistureDo not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
8.Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or 
sold with the product. Any mounting of 
the appliance should follow the 
manufacturer’s instructions and should 
use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.
9.Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
10.Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
11.Grounding or Polarization - This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12.Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
13.Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides
information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)
FIGURE A
EXAMPLE OF ANTENNA GROUNDING |
ANTENNA |
LEAD |
|
AS PER NATIONAL ELECTRICAL CODE |
WIRE |
GROUND |
|
CLAMP |
|
|
ANTENNA |
|
DISCHARGE UNIT |
|
(NEC SECTION 810-20) |
ELECTRIC |
|
SERVICE |
|
EQUIPMENT |
GROUNDING CONDUCTORS |
|
(NEC SECTION 810-21) |
|
GROUND CLAMP |
NEC – NATIONAL ELECTRICAL CODE |
POWER SERVICE GROUNDING |
S2898A |
ELECTRODE SYSTEM |
|
(NEC ART 250, PART H) |
14.Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
15.Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
16.Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
17.Object and Liquid Entry - Never push objects of any kind into this product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
18.Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19.Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a.When the power-supply cord or plug is damaged.
b.If liquid has been spilled, or objects have fallen into the product.
c.If the product has been exposed to rain or water.
d.If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
e.If the product has been dropped or damaged in any way.
f.When the product exhibits a distinct change in performance this indicates a need for service.
20.Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
21.Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
22.Heat - This product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
EN 3
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
PRECAUTIONS
Installation Location
For safety and optimum performance of this unit:
•Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV.
•Shield it from direct sunlight and keep it away from devices of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.
Avoid the Hazards of Electrical Shock and Fire
•Do not handle the power cord with wet hands.
•Do not pull on the power cord when disconnecting it from AC outlet. Grasp it by the plug.
•If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.
Moisture Condensation Warning
Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry.
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Notice for Progressive Scan Output
Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 525 progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with this 525p DVD player, please contact our customer service center.
Supplied Accessories
remote control (NB555UD) with batteries (AAAx2)
RF coaxial cable (WPZ0901TM002)
RCA audio/video cables (WPZ0102TM015/WPZ0102LTE01)
owner's manual (1VMN23373)
quick guide (1VMN23374)
4EN
PRECAUTIONS
Maintenance
Servicing
•Please refer to relevant topics on “TROUBLESHOOTING” on pages 90-94 before returning the product.
•If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.
Cleaning the cabinet
•Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.
Cleaning discs
•When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.
•Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.
Cleaning the disc lens
•If this unit still does not perform properly although you refer to the relevant sections and to
“TROUBLESHOOTING” in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
Disc handling
•Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
•Always store the disc in its protective case when it is not used.
Auto head cleaning
•Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.
•Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned.
©2007 Funai Electric Co., Ltd.
1.Please visit your local Audio/Video store and purchase a good quality VHS video head cleaner.
2.If a video head cleaner does not solve the problem, please consult your dealer or an Authorized Service Center.
Note
•Remember to read the instructions along with the video head cleaner before use.
•Clean video heads only when problems occur.
IR signal check
If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera
of cellular phone). It will help to define the cause of malfunction.
• With an AM radio:
Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control is working.
• With a digital camera (including built-in camera of cellular phone):
Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Dolby Digital Recording
“Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allowing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back on all DVD-video players.” Note: This is true when the players are compatible with actual recordable DVD discs.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.
with the 
design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
EN 5
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
CONTENTS
Introduction
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Symbols Used in this Owner's Manual . . . . . . . . . . . . . . . . . . 7
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Connections
ANTENNA CABLE CONNECTION . . . . . . . . . . . . . . . . . . . 13
RF MODULATOR CONNECTION. . . . . . . . . . . . . . . . . . . . 14
CONNECTION TO A CABLE / SATELLITE BOX. . . . . . . . 15
CONNECTION TO A TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . . . 17
THE VCR / DVD RECORDER SWITCHING . . . . . . . . . . . . 18
GUIDE TO ON-SCREEN DISPLAYS AND MENUS . . . . . 19
On-Screen Display / Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
CHANNEL SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Auto Channel Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Adding / Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . . . . .23
SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Daylight Saving Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
TUNER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Switching Analog Mode / Digital Mode . . . . . . . . . . . . . . . .27
Channel Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Selecting TV Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
DTV Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Recording
INFORMATION ON DVD RECORDING . . . . . . . . . . . . . . 33 BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . . . . .34 Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
BASIC RECORDING &
ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . . 35 TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
OVERWRITING UNNECESSARY TITLE . . . . . . . . . . . . . . 41
Overwriting from the Beginning of the Title . . . . . . . . . . .41 Overwriting in the Middle of the Title. . . . . . . . . . . . . . . . . .41 Hints for Overwriting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
SETTINGS FOR AN EXTERNAL DEVICE . . . . . . . . . . . . . 43
Connection to an External Device . . . . . . . . . . . . . . . . . . . . .43 Recording from an External Device . . . . . . . . . . . . . . . . . . . .44
SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . . . 45 PLAYING THE DISCS IN OTHER DVD PLAYERS . . . . . . 46
Finalizing a Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Auto Finalizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
DUBBING MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Playback
INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . . 50
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Playing Back a CD-RW/-R with MP3 Files . . . . . . . . . . . . . . .54 Using the Title / Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Pause. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . . . . .56 Skipping TV Commercials During Playback . . . . . . . . . . . .56 Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . . . . .57 Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
REPEAT / RANDOM / PROGRAM PLAYBACK . . . . . . . . 61
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Program Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
SELECTING THE FORMAT OF AUDIO AND VIDEO . . . 63
Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . . . . .63 Switching Virtual Surround System . . . . . . . . . . . . . . . . . . . .64 Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Editing
INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . . . 65
Guide to a Title List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 Setting Chapter Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 Clearing Chapter Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Hiding Chapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 Setting Pictures for Thumbnails . . . . . . . . . . . . . . . . . . . . . . .72 Dividing a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 Setting or Releasing Disc Protect . . . . . . . . . . . . . . . . . . . . . .75 Erasing Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Making Edits Compatible. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Function Setup
LIST OF SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Required Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
VCR Functions
VCR FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
One-touch Timer Recording (OTR) . . . . . . . . . . . . . . . . . . . . .88
Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Others
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . . . . .94
LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Español
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . Back cover
6EN
FEATURES
This unit not only plays back DVD, CD and VCR but also offers features for you to record on DVD and edit them after that.
The following features are offered with this unit.
Recording
DVD mode 
VCR mode
This unit is compatible with DVD+RW/DVD-RW, which is rewritable repeatedly and DVD+R/DVD-R, which is available for recording once. Even if you choose DVD-RW/DVD-R, these discs will automatically be recorded in the DVD+VR mode. Also, this unit allows you to record to the cassette tape. You can choose either one for your convenience.
Setting pictures for thumbnails:
You can change pictures for thumbnails.
Dividing titles (DVD+RW/DVD-RW only):
You can divide a title into 2 or more.
Putting name on disc:
You can put your favorite disc name.
Compatibility
Up to 8 program recording:
You can program the unit to record up to 8 programs, with in a month in advance. Daily or weekly program recordings are also available.
One-touch timer recording (OTR):
You can easily set a recording time as you prefer. Every time [RECORD I] or [REC I] is pressed during recording, the recording time will be increased by 30 minutes up to 6 hours for DVD, and 8 hours for VCR. The recording automatically stops when the recording time you set is reached or the disc is full.
Dubbing mode:
You can copy a DVD disc to a cassette tape or copy a cassette tape to a DVD disc. This function will be possible only if the DVD disc or a cassette tape is not copy protected.
You cannot record on a cassette tape when its erase-protection tab is removed.
Automatic chapter mark setting: |
DVD mode |
Chapter marks will be put on recordings as you set before attempting to record.
Automatic title list making:
The unit makes a title list with the index automatically.
Left channel stereo recording:
This unit can record the sound of the left channel monaural input as left and right channels automatically.
Playback
Theater surround sound in your home: |
DVD mode |
When connecting the unit to an amplifier or a decoder which is compatible with Dolby Digital, you can experience the theater surround sound from discs with surround sound system.
Quick search for what you want to watch:
You can easily find the part you want to watch using the search function. Search for a desired point on a disc by title, chapter or time.
Virtual surround system:
You can enjoy stereophonic space through your existing 2 channel stereo system.
Playing back on MP3 files:
You can enjoy MP3 files which are recorded on CD-RW/-R.
Quick search for what you want to watch: |
VCR mode |
You can easily find the part you want to watch using the index search/time search functions. An index mark will be assigned at the beginning of each recording you make. For time search function, you can go to a specific point on a cassette tape by entering the exact amount of time you wish to skip.
Editing
Deleting titles: |
DVD mode |
You can delete titles which you do not need anymore.
Putting names on titles:
You can put your favorite names on titles.
Setting / clearing chapter marks:
You can set / clear chapter marks on titles.
Hiding chapters:
To keep others from playing back some chapters without permission, you can hide chapters.
DVD mode
Available for playing back discs on a regular DVD player:
Recorded discs can be played back on regular DVD players, including computer DVD drives compatible with DVD-video playback. Although DVD+R are playable on other units without finalization in most cases, it is recommended to finalize in order to stabilize the performance. For DVD-RW/ DVD-R, you need to finalize the recorded discs to play on other DVD players.
Others
Progressive scan system
Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional television signals.
Symbols Used in this Owner's Manual
To specify for what disc type each function is, we put the following symbols at the beginning of each item to operate.
*DVD-RW/-R recorded in VR mode or non compatible recording format are not playable.
*DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc (see page 77).
*DVD-R recorded in the mode other than +VR is not recordable on this unit.
Symbol Description
For Recording, Playing, and Editing
Description refers to DVD+RW
Description refers to DVD+R
Description refers to DVD-RW
Description refers to DVD-R
Description refers to VHS tapes
Use only cassettes marked VHS (
).
For Playback only
Description refers to DVD-video
Description refers to audio CD
Description refers to video CD with PBC function
Description refers to video CD without PBC
function
Description refers to CD-RW/-R with MP3 files
If you do not find any of the symbols listed above under the function heading, the operation is applicable to all media.
EN 7
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
FUNCTIONAL OVERVIEW
Front Panel
1 |
2* |
3 |
23 |
22 |
212019181716 |
15 |
14 13 121110 9 8* 7 |
6 |
5 |
4 |
(*) The unit can also be turned on by pressing these buttons or insert a cassette tape.
1. Cassette compartment (VCR)
Insert a cassette tape here.
2. OPEN/CLOSE A button (DVD)*
Press to open or close the disc tray.
3. Disc tray (DVD)
Place a disc when it is open.
4. AUDIO input jacks (E2) (DVD/VCR)
Use to connect external device with a RCA audio cable.
5. VIDEO input jack (E2) (DVD/VCR)
Use to connect external device with a RCA video cable.
6. S-VIDEO input jack (E2) (DVD/VCR)
Use to connect the S-video output of external device with an S-video cable.
7. RECORD Ibutton (DVD)
Press once to start recording.
Press repeatedly to start the one-touch timer recording.
8. PLAY B button (DVD)*
Press to start or resume playback.
9. STOP C button (DVD)
Press to stop playback or recording.
Press to stop the proceeding timer recording in DVD.
10.DVD indicator
Lights up when the DVD output mode is selected.
11.SOURCE button (DVD/VCR)
Press to select the component you wish to operate.
12.VCR indicator
Lights up when the VCR output mode is selected.
13.D.DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD to VCR) duplication which you set in the main menu.
8EN
FUNCTIONAL OVERVIEW
Rear Panel
1 |
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
OUT |
|
DVD |
|
|
|
DVD/VCR |
|
|
DIGITAL |
AUDIO S-VIDEO |
COMPONENT |
S-VIDEO IN ---AUDIO---OUT |
|
|||
AUDIO OUT |
OUT |
|
VIDEO OUT |
|
|
|
|
|
|
|
Y |
|
L |
L |
IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ANTENNA |
|
L |
OUT |
PB |
IN |
R |
R |
|
|
/CB |
|
|||||
|
|
|
|
|
|||
COAXIAL |
|
|
|
|
IN ---VIDEO---OUT |
|
|
|
|
|
|
|
|
||
|
R |
|
PR |
|
|
|
|
|
|
/CR |
|
|
|
|
|
|
|
|
|
|
|
|
|
1.AC Power Cord (DVD/VCR)
Connect to a standard AC outlet to supply power to this unit.
2.TV ANTENNA OUT jack (DVD/VCR)
Use to connect an antenna cable to pass the signal from the TV ANTENNA IN to your TV monitor.
3.TV ANTENNA IN jack (DVD/VCR)
Use to connect an antenna.
4.AUDIO OUT jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other device with a RCA audio cable.
5.VIDEO OUT jack (DVD/VCR)
Use to connect a TV monitor, AV receiver or other device with a RCA video cable.
6.VIDEO IN jack (E1) (DVD/VCR)
Use to connect external device with a RCA video cable.
7.AUDIO IN jacks (E1) (DVD/VCR)
Use to connect external device with a RCA audio cable.
8.S-VIDEO IN jack (E1) (DVD/VCR)
Use to connect the S-video output of external device with an S-video cable.
9 . COMPONENT VIDEO OUT jacks (DVD only)
Use to connect a TV monitor with component video inputs with a component video cable.
12 |
1110 9 |
8 7 6 5 |
4 |
3 |
10.S-VIDEO OUT jack (DVD only)
Use to connect the S-video input of a TV monitor, AV receiver or other device with an S-video cable.
11.AUDIO OUT jacks (DVD only)
Use to connect a TV monitor, AV receiver or other device with a RCA audio cable.
12.COAXIAL DIGITAL AUDIO OUT jack (DVD only)
Use to connect an AV receiver, Dolby Digital decoder or other device with a coaxial digital input jack with a digital coaxial cable.
Note
•Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
•This unit does not have the RF modulator.
EN 9
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
FUNCTIONAL OVERVIEW
Remote Control
Installing the Batteries in the Remote Control
Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control.
1 Open the cover.
2 Insert batteries.
Using a Remote Control
Keep in mind the following when using the remote control:
•Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
•Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit.
•Remote control for different devices can interfere with each other. Avoid using remote control for other device located close to the unit.
•Replace the batteries when you notice a fall off in the operating range of the remote control.
•The maximum operable ranges from the unit are as follows.
-Line of sight: approx. 23 feet (7m)
-Either side of the center: approx. 16 feet (5m) within 30°
-Above: approx. 16 feet (5m) within 15°
-Below: approx. 10 feet (3m) within 30°
Make sure to match + and - on the batteries to the marks indicated in the battery compartment.
3 Close the cover.
Note
Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:
•Do not mix new and old batteries together.
•Do not use different kinds of batteries together. Although they may look similar, different batteries may have different voltages.
•Make sure that the + and - ends of each battery match the indications in the battery compartment.
•Remove batteries from battery compartment that is not going to be used for a month or more.
•When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.
•Do not recharge, short-circuit, heat, burn or disassemble batteries.
16feet (5m) |
23feet (7m) |
|
16feet (5m) |
|||
30˚ |
|
|
|
|
|
30˚ |
1 |
|
|
|
|
STANDBY-ON |
18 |
|
|
|
|
|
||
2 |
|
|
|
|
|
|
SOURCE DTV/TV |
DISPLAY OPEN/CLOSE |
19 |
||||
3 |
|
|
|
|
A |
|
|
.@/: |
|
ABC |
DEF |
|
|
4 |
1 |
|
2 |
3 |
|
|
|
GHI |
|
JKL |
MNO |
|
|
|
4 |
|
5 |
6 |
|
|
|
|
PQRS |
|
TUV |
WXYZ |
|
|
7 |
|
8 |
9 |
|
|
5 |
. |
SPACE |
CLEAR |
20 |
||
|
0 |
|
||||
6 |
DISC MENU |
|
|
SETUP |
21 |
|
7 |
|
|
|
o |
|
|
|
|
|
OK |
|
22 |
|
|
|
s |
|
B |
||
8 |
|
TITLE |
|
|
RETURN |
23 |
|
|
|
p |
|
||
10 9 |
|
|
|
|
|
24 |
|
j |
|
B |
i |
2625 |
|
11 |
|
F |
h |
g |
C |
27 |
12 |
|
|
CHANNEL |
|
|
|
-- |
|
|
+ |
28 |
||
13 |
REC MODE |
VCR |
DVD |
TIMER |
||
14 |
|
REC |
|
|
AUDIO |
29 |
15 |
|
|
|
30 |
||
|
I |
|
TIMER |
|
||
16 |
CM SKIP D.DUBBING SET |
RAPID PLAY |
31 |
|||
|
|
|
|
|
||
17 |
SEARCH |
|
|
|
32 |
|
|
|
|
|
|
33 |
|
10 EN
FUNCTIONAL OVERVIEW
1.DISPLAY button (DVD/VCR)
Press to display the display menu on or off.
2.DTV/TV button (DVD/VCR)
Press to switch between digital TV mode (DTV) and analog TV mode.
3.SOURCE button (DVD/VCR)
Press to select the appropriate input.
4.Number/Character buttons (DVD/VCR)
•Press to select channel numbers.
•Press to select a title/chapter/track/file on display.
•Press to enter values for the settings in the main menu.
•Press to enter title names.
•Press to start the index/time search in VCR mode.
5.Confirm ( • ) button (DVD/VCR)
Analog mode:
Press to confirm the channel selection made by
[the Number buttons].
Digital mode:
Press to confirm the major / minor channel selection made by [the Number buttons].
6.DISC MENU button (DVD)
Press to display the disc menu.
7.OK button (DVD/VCR)
Press to confirm or select menu items.
8.TITLE button (DVD)
Press to display the title list.
9.PREV H button (DVD)
•During playback, press to return to the beginning of the current chapter, track or file.
•When playback is paused, press to play back reverse step by step.
10.REW E button (DVD/VCR)
DVD mode:
•During playback, press to fast reverse.
•When playback is paused, press to play slow reverse.
VCR mode:
•During playback, press to rewind the cassette tape or to view the picture rapidly in reverse.
11.PAUSE F button (DVD/VCR)
Press to pause playback or recording.
12.CHANNEL
/
buttons (DVD/VCR)
DVD mode:
Press to change the channel up and down.
VCR mode:
•Press to change the channel up and down.
•Press to adjust the tracking during playback or in slow motion of the cassette tape.
•While playback is in still mode, you can adjust the picture blurred vertically.
13.VCR button
•Press to select the VCR output mode.
14.REC MODE button (DVD/VCR)
Press to switch the recording mode.
15.REC I button (DVD/VCR)
•Press once to start a recording.
•Press repeatedly to start the one-touch timer recording.
16.CM SKIP button (DVD)
During playback, press to skip 30 seconds.
17.SEARCH button (VCR)
Press to call up the index or time search menu.
18.STANDBY-ON y button (DVD/VCR)
Press to turn the unit on and off. If timer programmings have been set, press to set the unit in timerstandby mode.
19.OPEN/CLOSE A button (DVD/VCR)
DVD mode:
Press to open or close the disc tray.
VCR mode:
Press to remove the cassette tape from the cassette compartment.
20.CLEAR button (DVD/VCR)
DVD mode:
Press to clear the password once entered or to cancel the programming for CD or to clear the selecting marker number in the edit menu or to clear the program once entered in the timer programming list, etc.
VCR mode:
Press to reset the tape counter.
21.SETUP button (DVD/VCR)
•Press to display the main menu.
•During DVD playback, press and hold for more than 3 seconds to switch the progressive scanning mode to the interlace mode.
22.Cursor K / L/ { / B buttons (DVD/VCR)
Press to select items or settings.
23.RETURN button (DVD/VCR)
Press to return to the previously displayed menu screen.
24.PLAY B button (DVD/VCR)
Press to start or resume playback.
25.NEXT G button (DVD)
•During playback, press to skip to the next chapter, track or file.
•When playback is paused, press to play back forward step by step.
26.FFW D button (DVD/VCR)
DVD mode:
•During playback, press to play back fast forward.
•When playback is paused, press to play back slow forward.
VCR mode:
•During playback, press to rapidly advance the cassette tape or view the picture rapidly in forward.
•When playback is paused, press to view the cassette tape in slow motion.
27.STOP C button (DVD/VCR)
•Press to stop playback or recording.
•Press to exit from the title list.
28.DVD button
•Press to select the DVD output mode.
29.TIMER button (DVD/VCR)
Press to display the timer programming list.
30.AUDIO button (DVD/VCR)
Analog mode:
During playback, press to display the audio menu.
Digital mode:
•When playback is in stop mode, press to switch the audio language.
•During playback, press to display the audio menu.
•During playback a HiFi video tape, press to change the audio out setting HiFi and mono (VCR).
31.RAPID PLAY button (DVD)
During playback, press to playback in a slightly faster/slower mode with keeping the audio quality.
32.TIMER SET button (DVD/VCR)
Press to set the unit in the timer standby mode. In the timer standby mode, press to cancel the mode and to turn the unit on.
33.D.DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD to VCR) duplication which you set in the main menu.
Note
•If you turn off this unit, [OPEN/CLOSE A] on the remote control is not available.
Be sure to use [OPEN/CLOSE A] or [STOP C / EJECT A] on the unit.
EN 11
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
FUNCTIONAL OVERVIEW
Front Panel Display
4 2
1 |
3 |
|
6 |
||
7 |
||
|
5
1. Current status of the unit
: Appears when playback is paused.
: Appears when playing back a disc or a cassette tape.
: Appears when the timer programming or OTR has been set and is proceeding.
:Flashes when all timer recordings have been finished.
: Appears during recording process.
:Flashes when a recording pauses.
:Appears during repeat playback.
: Appears when a cassette tape is in the unit.
2.Disc type and current status of the unit
: Appears when an audio CD, a CD-RW/-R with MP3 files is on the disc tray.
: Appears when a video CD is on the disc tray.
Display Message
:Appears when a DVD is on the disc tray.
:Appears when the timer recording is proceeding in DVD.
:Appears when DVD is in the timer recording standby mode.
:Flashes when a program cannot be performed for some reasons.
:Appears when a DVD+R/-R is on the disc tray.
:Appears when a DVD+RW/-RW is on the disc tray.
:Appears when the timer recording is proceeding in VCR.
:Appears when VCR is in the timer recording standby mode.
:Flashes when a program cannot be performed for some reasons.
:Appears during VCR to DVD duplication process.
:Appears during DVD to VCR duplication process.
3. Recording mode
:Indicates the recording speed of the disc or a cassette tape.
4.Title/track/file and chapter mark
: Appears when indicating a title/track/file number.
: Appears when indicating a chapter number.
5.Displays the following
•Elapsed playback time
•Current title/chapter/track/file number
•Recording time/remaining time
•Clock
•Channel number
•VCR tape counter
•Remaining time for one-touch timer recording
6.
:Appears in the afternoon with the clock display.
7.
:Appears when the progressive scan system is activated.
Appears when the disc tray is opening.
Appears when the disc tray is closing.
Appears when a disc is loaded on the disc tray.
Appears when data is being written on a disc.
Appears when the PBC function is activated. (Video CD playback only. Refer to page 50.)
12 EN
ANTENNA CABLE CONNECTION
This section describes how to connect your unit to an antenna, cable box, etc.
1Disconnect the power cord of your TV from the AC outlet.
2 Disconnect RF coaxial cable from antenna input jack of your TV. |
|
|
VHF / UHF |
|||||||||||||
|
rear of your TV |
|
|
|
|
|
|
antenna |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
or |
|
|
|
|
|
|
|
|
|
|
|
ANT. IN |
RF coaxial cable |
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||
disconnect |
2 |
|
|
|
|
|
cable TV |
|||||||||
|
|
|
|
company |
||||||||||||
disconnect
3Connect cables to the unit.
Make the basic connection as illustrated below.
rear of this unit
|
DVD/VCR |
|
|
DVD |
DVD/VCR |
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIGITAL |
AUDIO |
S-VIDEO COMPONENT |
S-VIDEO IN ---AUDIO---OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
S-VIDEO IN ---AUDIO---OUT |
|
AUDIO OUT |
OUT |
VIDEO OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
Y |
L |
L |
IN |
|
|
|
|
|
VHF / UHF |
||||||||||||||
|
|
|
|
|
|
|
|
L |
OUT /CB |
IN R |
R |
ANTENNA |
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
R |
PB |
|
|
|
OUT |
|
|
|
|
antenna |
||||||||
|
|
|
|
|
|
|
COAXIAL |
/CR |
IN ---VIDEO---OUT |
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
PR |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
L |
|
|
|
|
|
|
|
|
|
|
RF coaxial |
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
cable |
||||||||||||
IN |
R |
|
|
|
|
|
|
|
|
|
IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
IN ---VIDEO---OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
ANTENNA |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
rear of your TV |
|
|
RF coaxial cable |
|
or |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
cable TV company
|
|
This connection is for |
RCA audio |
RCA video |
TV loop through only |
cable |
cable |
|
R |
L |
ANT. IN |
AUDIO IN |
VIDEO IN |
|
Editing Playback Recording Setup Basic Connections Introduction
4Plug in the power cord of this unit and your TV to the AC outlet.
|
|
|
rear of your TV |
|
|||
|
|
|
|
|
|
|
Supplied cables used in this connection are as follows: |
|
|
|
|
|
|
|
• RF coaxial cable x 1 |
|
|
|
|
|
|
|
• RCA audio cable (L/R) x 1 |
connect |
|
|
|
|
|
|
• RCA video cable x 1 |
|
|
|
|
|
|
|
Please purchase the rest of the necessary cables at your |
|
|
|
|
|
|
|
local store. |
|
|
|
rear of this unit |
*Once connections are completed, turn on the TV and |
|||
|
|
|
begin initial setting. |
||||
|
|
|
|
|
|
|
|
|
DVD |
|
DVD/VCR |
|
OUT |
Channel scanning is necessary for the unit to memorize |
|
DIGITAL |
AUDIO |
S-VIDEO COMPONENT |
S-VIDEO IN ---AUDIO---OUT |
|
all available channels in your area. |
||
AUDIO OUT |
OUT |
|
VIDEO OUT |
|
|
|
|
|
|
|
Y |
L |
L |
ANTENNA |
|
|
|
|
IN |
|
|||
|
R |
OUT |
PB |
IN R |
R |
|
(Refer to “INITIAL SETTING” on page 21.) |
|
/CR |
|
|||||
|
L |
/CB |
|
|
|||
COAXIAL |
|
|
|
IN ---VIDEO---OUT |
|
|
|
|
|
|
PR |
|
|
|
|
Note
•For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack before moving the unit.
•If you use an antenna to receive analog TV, it should also work for digital TV reception. Outdoor or attic antennas will be more effective than set-top versions.
•RF output is for tuner pass through only. DVD playback through the RF is not possible.
EN 13
Others Functions VCR Setup Function
Español
RF MODULATOR CONNECTION
If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a stereo audio/video RF modulator. In this case, follow the instructions below.
1)Disconnect the power cords of the devices from the AC outlet.
2)Make the connection as illustrated below.
3)Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF modulator.
4)Plug in the power cords of the devices to the AC outlet.
5)Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.
For more details, follow the manual supplied with the RF modulator.
rear of this unit
DVD/V |
|
|
|
|
|
|
|
|
|
C |
R |
|
DVD |
|
|
DVD/VCR |
OUT |
||
|
|
|
|
|
|
|
|
|
|
|
|
DIGITAL |
AUDIO |
S-VIDEO COMPONENT |
S-VIDEO |
IN ---AUDIO---OUT |
|||
|
|
AUDIO OUT |
|
T |
|
VIDEO OUT |
|
|
|
S-VIDEO IN ---AUDIO---OUT |
Y |
|
L |
L IN |
|||||
|
|
|
|
|
|
|
|
|
ANTENNA |
|
|
|
|
L |
OUT |
PB |
IN |
R |
R |
|
|
|
|
/CB |
|||||
|
|
COAXIAL |
|
|
|
|
|
IN ---VIDEO---OUT |
|
|
|
L |
|
R |
|
PR |
|
|
|
|
|
|
|
|
/CR |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VHF / UHF |
|||||||
rear of your TV |
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
antenna |
|||||||||||||||||
|
|
|
|
|
|
IN |
|
|
|
|
|
|
|
|
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
IN ---VIDEO---OUT |
|
|
|
|
|
|
|
RF coaxial cable |
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IN |
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ANTENNA |
|
or |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
cable TV |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
RCA audio |
|
|
|
|
|
RCA video |
|
|
|
|
RF coaxial cable |
|
|
company |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
cable |
|
|
|
|
|
|
|
cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
ANT. IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
L |
|
|
|
|
3 |
|
|
4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
TO TV AUDIO IN |
VIDEO IN |
CHANNEL |
ANT. IN |
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
Set channel 3 or 4
rear of your RF modulator
Supplied cables used in this connection are as follows:
•RF coaxial cable x 1
•RCA audio cable (L/R) x 1
•RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• The quality of picture may become poor if this unit is connected to an RF modulator.
14 EN
CONNECTION TO A CABLE / SATELLITE BOX
1)Disconnect the power cords of the devices from the AC outlet.
2)Make the connection as illustrated below.
3)Plug in the power cords of the devices to the AC outlet.
e.g.) |
|
|
|
|
RCA video cable |
|
|||||||
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
RCA audio |
|
|||||
DVD/V |
|
|
|
|
|
|
cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|||||
C |
R |
DVD |
|
DVD/VCR |
OUT |
OUT |
|
||||||
|
|
DIGITAL |
AUDIO S-VIDEO COMPONENT S-VIDEO IN ---AUDIO---OUT |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
||||
|
|
AUDIO OUT |
T |
VIDEO OUT |
|
|
|
|
|
|
|
|
|
S-VIDEO IN ---AUDIO---OUT |
Y |
L L |
IN |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
ANTENNA |
|
|
|
|
L |
OUT |
PB |
IN |
R |
R |
R |
L |
|
|
/CB |
VIDEO OUT |
|||||||
L |
COAXIAL |
|
/CR |
|
IN ---VIDEO---OUT |
AUDIO OUT |
|||
R |
|
|
|
|
|
||||
|
|
|
PR |
|
|
|
|
|
|
|
|
|
|
|
|
IN |
cable/satellite |
|
|
|
|
|
|
|
|
|
box |
|
|
IN |
|
R |
|
|
|
|
|
ANTENNA |
|
|
|
|
|
|
|
|
|
||
|
IN ---VIDEO---OUT |
RF coaxial |
This connection is |
RF coaxial |
|||||||||||||||
|
|
|
|
|
|
cable |
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
for TV loop |
cable |
||||||||
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
through only |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RF OUT ANT. IN |
|
satellite |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
ANT. IN |
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
rear of your TV |
|
|
|
|
|
|
|
|
dish |
||||
|
|
|
|
|
|
RCA audio |
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
cable |
|
|
|
|
|
|
|
|
|
|
|||
RCA video cable
RF coaxial |
|
cable |
or |
|
VIDEO IN |
L |
cable TV |
R |
|
AUDIO IN |
company |
|
Playback Recording Setup Basic Connections Introduction
Supplied cables used in this connection are as follows:
•RF coaxial cable x 1
•RCA audio cable (L/R) x 1
•RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
•Required cables and connecting methods differ depending on the cable/satellite box. For more information, please contact your cable/satellite provider.
With this setup:
•You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the cable/satellite box is turned on.
•You cannot record one channel while watching another channel.
Others Functions VCR Setup Function Editing
Note to CATV system installer |
|
|
|
||
• This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical |
Español |
|
Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be |
||
|
||
connected to the grounding system of the building, as close to the point of cable entry as possible. |
|
EN 15
CONNECTION TO A TV
Make one of the following connections, depending on the capabilities of your existing device. VCR and basic DVD connection
TV
|
|
|
|
|
|
|
|
|
|
|
|
R |
L |
VIDEO |
|
AUDIO IN |
IN |
||
this unit
|
|
|
|
|
|
|
OUT |
|
DVD |
|
|
DVD/VCR |
|
|
|
DIGITAL |
AUDIO |
S-VIDEO |
|
S-VIDEO |
IN ---AUDIO---OUT |
|
|
AUDIO OUT |
OUT |
|
|
|
|
|
|
|
|
|
Y |
|
L |
L |
IN |
|
|
|
|
|
|
|
ANTENNA |
|
L |
OUT |
P |
IN |
R |
R |
|
|
/C |
|
|||||
COAXIAL |
|
|
|
|
IN ---VIDEO---OUT |
|
|
|
R |
|
P |
|
|
|
|
|
|
/C |
|
|
|
|
|
RCA audio cable
RCA video cable
|
|
|
AUDIO OUT (DVD/VCR) |
|
|
|
|
|||
|
|
|
|
VIDEO OUT |
|
|
|
|
||
Available on DVD only |
|
|
|
|
|
|
|
|
||
|
|
|
|
Method 1 |
|
|
Method 2 |
|||
|
|
analog audio |
|
good picture |
|
better picture |
||||
TV |
|
|
|
|
|
S-VIDEO IN |
|
|
COMPONENT |
|
|
|
|
|
|
|
|
|
|
|
VIDEO IN |
|
|
|
|
|
|
|
|
|
|
Y |
|
|
|
|
|
|
|
|
|
|
(Green) |
|
|
|
|
|
|
|
|
|
|
PB/CB |
|
|
|
|
|
|
|
|
|
|
(Blue) |
|
|
|
|
|
|
|
|
|
|
PR/CR |
|
|
|
|
|
|
|
|
|
|
(Red) |
|
|
R L |
and |
|
|
|
or |
|
|
|
|
|
AUDIO IN |
|
|
|
|
|
|
||
|
|
RCA audio cable |
|
S-video cable |
component video cable |
|||||
this unit |
|
|
AUDIO OUT |
DVD |
|
VIDEO OUT |
AUDIO OUT |
DVD |
VIDEO OUT (Green) |
|
|
|
OUT |
|
OUT |
|
|||||
|
|
|
DIGITAL |
AUDIO S-VIDEO COMPONENT |
DIGITAL |
AUDIO |
S-VIDEO COMPONENT |
|||
|
|
|
|
|
|
Y |
|
|
|
Y |
DIGITAL |
AUDIODVDS-VIDEO |
S-VIDEO IN ---AUDIO---OUT |
|
|
|
|
|
|
|
(Blue) |
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
DVD/VCR |
|
|
|
|
|
|
|
|
AUDIO OUT |
OUT |
|
|
|
|
PB |
|
|
|
PB |
|
Y |
L L IN |
|
L |
OUT |
|
L |
OUT |
||
|
L OUT |
ANTENNA |
|
/CB |
|
/CB |
||||
COAXIAL |
|
|
COAXIAL |
|
|
|
COAXIAL |
|
|
|
|
R |
|
|
|
|
|
|
(Red) |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
PR |
|
R |
|
PR |
|
|
|
|
|
/CR |
|
|
/CR |
||
|
|
|
|
|
|
|
|
|
||
|
|
AUDIO OUT (DVD) |
S-VIDEO OUT |
COMPONENT |
||||||
|
|
|
|
|
|
|
VIDEO OUTPUT |
|||
Supplied cables used in this connection are as follows:
•RCA audio cable (L/R) x 1
•RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
After you have completed the connections
•Switch the input selector on your TV to an appropriate external input channel. Press a button on the TV’s original remote control that selects an external input channel until the DVD recorder’s opening picture appears. Check your TV owner’s manual for details.
Note
•Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy protection system.
•You will not be able to hear the sound being output from DVD if you are not connecting DVD AUDIO OUT when you made either S-video or component video out connection.
•When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.
To set progressive scan mode, refer to page 83
•This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set “Progressive Scan” to “ON”.
16 EN
CONNECTION TO AN AUDIO SYSTEM
•When you change the connections, all devices should be turned off.
•Refer to the operation manual accompanying external devices for more information.
Playing Back 2 Channel Analog Audio
stereo system
R L
AUDIO IN
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
analog audio |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
input jacks |
||
RCA audio cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
DVD |
|
|
|
|
|
|
|
|
|
|
|
DVD/VCR |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
DIGITAL |
|
AUDIO S-VIDEO COMPONENT |
|
|
|
|
|
|
S-VIDEO IN ---AUDIO---OUT |
|||||||||
|
AUDIO OUT |
|
OUT |
|
VIDEO OUT |
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
Y |
|
|
|
|
|
|
|
L |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
DVD |
|
DVD/VCR |
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
DIGITAL |
AUDIO |
S-VIDEO COMPONENT S-VIDEO IN ---AUDIO---OUT |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
AUDIO OUT |
OUT |
|
VIDEO OUT |
|
|
|
|
|
|
|
|
|
|
|
L |
OUT |
PB |
|
|
Y |
L |
L |
IN |
IN |
R |
|
|
|||
|
|
|
|
/CB |
L |
OUT |
/CP IN |
R |
R |
ANTENNA |
|
|
|||||||
|
COAXIAL |
|
|
|
|
|
|
COAXIAL |
|
|
|
IN ---VIDEO---OUT |
|
|
|
IN ---VIDEO---OUT |
|||
|
|
|
|
|
|
|
|
R |
|
/C |
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
P |
|
|
|
|
|
|
|
|
|
|
|
R |
|
PR |
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
/CR |
|
|
|
|
|
|
|
|
|
|
||||
AUDIO OUT
Supplied cables used in this connection are as follows:
Playing Back Multi Channel Digital Audio
Dolby Digital decoder,
audio |
MD deck or DAT deck |
||
|
|||
|
COAXIAL digital audio |
||
|
|
|
coaxial input |
|
|
|
jack |
|
|
|
|
or |
|
|
|
|
digital audio |
|
|
|||||
|
|
|
|
|
|
coaxial cable |
|
|
||||
|
|
|
|
DVD |
|
|
|
|
|
|
|
|
|
DIGITAL |
AUDIO S-VIDEO |
COMPONENT |
|
|
|
|
|
|
|||
|
AUDIO OUT |
OUT |
|
VIDEO OUT |
|
|
|
|
|
|
||
|
|
|
|
|
Y |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OUT |
|
|
|
|
|
|
|
DVD |
|
DVD/VCR |
|
|
|
|
|
|
|
|
|
DIGITAL |
AUDIO |
S-VIDEO COMPONENT S-VIDEO IN ---AUDIO---OUT |
|
|
||
|
|
|
|
|
|
AUDIO OUT |
OUT |
|
VIDEO OUT |
|
|
|
|
|
|
L |
OUT |
PB |
|
|
Y |
L |
L |
IN |
|
|
|
|
/CB |
L |
OUT |
/CP IN |
R |
R |
ANTENNA |
|||
|
COAXIAL |
|
|
|
COAXIAL |
R |
|
/C |
IN ---VIDEO---OUT |
|
|
|
|
|
|
|
|
|
|
|
|
P |
|
|
|
|
|
|
R |
|
PR |
|
|
|
|
|
|
|
|
|
|
|
|
/CR |
|
|
|
|
|
|
|
this unit
DIGITAL AUDIO OUTPUT
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Setting |
Setup >Playback >Disc Audio >Digital Out > |
|
Connection |
Dolby Digital |
|
If output is Dolby Digital encoded audio, connect to a Dolby |
STREAM |
|
Digital decoder. |
||
|
||
|
|
|
Connecting to an MD deck or DAT deck. |
PCM |
|
|
|
|
If not connected to any external devices. |
PCM |
|
|
|
|
* To complete these settings, refer to page 83. |
|
Note
•The DVD AUDIO OUT and DIGITAL AUDIO OUT jacks are only useful in DVD mode.
•The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by an MD or DAT deck.
•By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround sound as heard in the movie theaters.
•Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
EN 17
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
THEVCR / DVD RECORDER SWITCHING
Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with [SOURCE].
DVD mode
Press [DVD] on the remote control. (Verify that the DVD indicator is lit.)
VCR mode
Press [VCR] on the remote control. (Verify that the VCR indicator is lit.)
DVD indicator
SOURCE button
VCR indicator
|
|
|
STANDBY-ON |
SOURCE |
DTV/TV |
DISPLAY OPEN/CLOSE |
|
|
|
|
A |
.@/: |
ABC |
DEF |
|
1 |
2 |
|
3 |
GHI |
JKL |
MNO |
|
4 |
5 |
|
6 |
PQRS |
TUV |
WXYZ |
|
7 |
8 |
|
9 |
. |
SPACE |
CLEAR |
|
0 |
|
|
|
DISC MENU |
|
SETUP |
|
|
o |
|
|
s |
OK |
B |
|
TITLE |
|
|
RETURN |
|
p |
|
|
j |
B |
i |
|
F |
h |
g |
C |
|
CHANNEL |
|
|
-- |
|
+ |
|
REC MODE |
VCR |
DVD |
TIMER |
REC |
|
|
AUDIO |
I |
|
|
|
|
|
TIMER |
|
CM SKIP |
D.DUBBING |
SET |
RAPID PLAY |
VCR button
DVD button
SEARCH
Note
• You cannot switch to another mode (DVD or VCR) during in the timer-standby mode.
18 EN
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen display give you the information on the loaded disc, the disc/file in playback, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference.
On-Screen Display / Menu
The on-screen display changes in the following order as you press [DISPLAY].
OFF |
DTV Program Guide (only in DTV mode) |
Disc Information/Menu (only when a disc is loaded) |
DTV Program Guide
|
|
|
1 |
|
|
5 |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
KABC |
DTV 6.1 |
||||||
25 |
|
A Day of Memories |
|
|
|
|
|||
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|||
35 |
|
English 1/2 |
|
|
|
|
|||
|
|
|
|
|
|||||
|
|
|
A quarter-century ago, which may now |
||||||
|
|
|
qualify as the good old days of |
|
|
|
|
||
|
|
|
newspapering, run-of-paper sales |
||||||
45 |
|
|
|||||||
|
|
accounted for 80 percent of the |
|
|
|
|
|||
|
|
|
industry's advertising revenues. |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.Broadcast station
2.Program title (max. 2 lines displayed)
3.Audio language (“Other” is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.)
4.Program guide (max. 6 lines displayed)
5.Channel number
Note
•When the program guide is displayed in more than 7 lines, use [K / L] to scroll.
•“No description provided” is displayed when the program guide is not provided.
Playback Recording Setup Basic Connections Introduction
Disc Information / Menu
DVD mode |
4 |
|
1 |
|
1 |
1 |
0:00:00 |
DVD+RW |
|
|
|
|
CH |
2 |
|
5 |
|
2 |
|
|
|
HQ(1Hr) |
|
1:01 |
6 |
|
|
3 |
|
1.Indicates a disc type.
2.Indicates a channel number or selected external input mode.
3.Indicates a recording mode and possible recording time left.
4.Indicates a title number, chapter number and the time lapse of disc playback.
5.Each icon means:
: Search |
: Marker |
: Audio |
: Noise Reduction |
: Subtitle |
: Zoom |
: Angle |
: Surround |
: Repeat |
|
6. Indicates an operation status.
VCR mode 
1
12:00AM 
2 CH 21 
Stereo 
3
SP |
0:00:00 |
HIFI |
4 |
5 |
6 |
1.Indicates current video status.
2.Indicates the current time.
3.Indicates a current channel number and an audio status of the program.
4.Indicates a recording or playing back mode.
5.Indicates a tape counter.
6.Audio status of the current cassette tape.
Note
•This is an example screen only for explanation. Displayed items are depending on the disc you inserted.
EN 19
Others Functions VCR Setup Function Editing
Español
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
Main Menu
Press [SETUP] to display the main menu. Then use [K / L] to select a menu and press [OK] to display the
menu. These menus provide entries to all main functions of the unit.
Setup
1 
Required Settings
2 
Playback
3 
Display
4 
Recording
5 
Clock
6 
Channel
7 
Disc Edit
1.Required Settings:
To set up the required settings.
2.Playback:
To set up the unit to play back discs as you prefer.
3.Display:
To set up the on-screen display as you prefer.
4.Recording:
To set up the unit to record to discs as you prefer.
5.Clock:
To set up the clock of the unit as you need.
6.Channel:
To adjust the channel setting of the unit as you prefer.
7.Disc Edit / CD Playback Mode:
•“Disc Edit” is only available with disc recorded in this unit.
•“CD Playback Mode” is available only when an audio CD, a video CD, a CD-RW/-R with MP3 files is inserted into the unit.
Disc Edit / CD Playback Mode
<Disc Edit menu (DVD+RW)>
Disc Edit
1Edit Disc Name
2Disc Protect OFF
ON
3Erase Disc
43 Make Edits Compatible
<Disc Edit menu (DVD-RW)>
Disc Edit
1Edit Disc Name
2Disc Protect OFF
ON
3Erase Disc
43 Finalize
<Disc Edit menu (DVD+R/DVD-R)>
Disc Edit
1Edit Disc Name
2Disc Protect OFF
ON
43 Finalize
<CD Playback Mode menu>
|
|
|
|
|
|
|
|
CD Playback Mode |
|
|
|
45 |
|
|
|
|
|
Random Play |
|
|
|
||
56 |
Program Play |
|
|
|
|
57 |
PBC (Video CD only) |
ON |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
1.Edit Disc Name:
Allows you to rename the disc.
2.Disc Protect :
Allows you to protect a disc from accidental editing or recording.
3.Erase Disc: (DVD+RW/DVD-RWonly)
Allows you to erase all contents in the disc and format it.
4.Make Edits Compatible: (DVD+RW only)
Allows you to memorize the editing status on the disc if you have added or deleted chapters, or made chapters hidden on this unit, and to effect it when playing back on the other unit.
Finalize: (DVD+R/DVD-RW/-R only)
Allows you to finalize a disc containing recorded titles.
5.Random Play:
Allows you to activate the random playback feature.
6.Program Play: (audio CD/video CD only)
Allows you to activate the program playback feature.
7.PBC (Video CD only):
Allows you to select images or information on the menu screen by activating PBC (playback control) function.
20 EN
INITIAL SETTING
You need to follow these steps when you turn on this unit for the first time.
STANDBY-ON
SOURCE DTV/TV DISPLAY OPEN/CLOSE
|
|
|
A |
.@/: |
|
ABC |
DEF |
1 |
|
2 |
3 |
GHI |
|
JKL |
MNO |
4 |
|
5 |
6 |
PQRS |
|
TUV |
WXYZ |
7 |
|
8 |
9 |
. |
|
SPACE |
CLEAR |
|
0 |
|
|
DISC MENU |
|
|
SETUP |
|
|
o |
|
s |
|
OK |
B |
TITLE |
|
|
RETURN |
|
|
p |
|
j |
|
B |
i |
F |
h |
g |
C |
CHANNEL
--+
REC MODE VCR |
DVD |
TIMER |
REC |
|
AUDIO |
I |
|
|
|
TIMER |
|
CM SKIP D.DUBBING |
SET |
RAPID PLAY |
SEARCH |
|
|
1Press [STANDBY-ON y].
Before:
Turn the TV on. Select the input to which the unit is connected.
2Use [K / L] to select your desired language, then press [OK] to set language.
Initial Setup
English
Français
Español
3Use [K / L] to select the type of broadcasting signal, then press [OK].
Initial Setup
Antenna
Cable (Analog)
Cable (Analog / Digital)
The unit will start getting channels available in your area.
Antenna:
(When using antenna)
The channels broadcasted in analog TV and digital TV are automatically scanned and memorized. Only the receivable channels in the area will be memorized.
Cable (Analog):
(When using basic cable)
The channels broadcasted in analog CATV are automatically scanned and memorized.
Cable (Analog / Digital):
(When using basic cable)
The channels broadcasted in analog CATV and digital CATV are automatically scanned and memorized.
CH 1
Auto Presetting Now
4 Press [OK] to activate “Clock Setting”.
Initial Setup
Clock Setting
5 Proceed to step 4 in “Manual Clock Setting” on page 26.
• If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” on page 25.
EN 21
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
CHANNEL SETTING
If you have changed antenna connection, we recommend that you program available channels in your area with the following procedures.
Auto Channel Scan
|
|
|
STANDBY-ON |
1 |
Press [SETUP]. |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
SOURCE |
DTV/TV |
DISPLAY OPEN/CLOSE |
2 |
|
|
|
|
|
|
A |
Use [K / L] to select “Channel”, then |
||
.@/: |
|
ABC |
DEF |
|||
|
press [OK]. |
|
||||
1 |
|
2 |
3 |
|
||
GHI |
|
JKL |
MNO |
“Channel” menu will appear. |
||
4 |
|
5 |
6 |
|
|
|
PQRS |
|
TUV |
WXYZ |
3 |
Use [K / L] to select “Auto Channel |
|
7 |
|
8 |
9 |
|||
|
Preset”, then press [OK]. |
|||||
. |
SPACE |
CLEAR |
||||
|
0 |
|
|
|
||
DISC MENU |
SETUP |
Use [K / L] to select the type of |
||||
|
|
o |
|
|
||
|
|
|
|
|
||
|
|
OK |
|
|
broadcasting signal, then press [OK]. |
|
s |
|
B |
4 Auto Channel Preset |
|
||
TITLE |
|
p |
RETURN |
VCR DVD |
||
|
|
|
|
|
Antenna |
|
|
|
|
|
|
Cable (Analog) |
|
j |
|
B |
i |
|
Cable (Analog / Digital) |
|
F |
h |
g |
C |
|
|
|
CHANNEL
--+
REC MODE VCR |
DVD |
TIMER |
The unit will start getting channels available in |
|
|
|
|
REC |
|
AUDIO |
your area. |
I |
|
|
• When aerial antenna is connected, select |
|
TIMER |
|
|
|
|
“Antenna”. |
|
CM SKIP D.DUBBING |
SET |
RAPID PLAY |
|
|
|
|
|
SEARCH |
|
|
• When connected to CATV, select “Cable |
|
|
(Analog)” or “Cable (Analog/Digital)”. |
|
|
|
|
[SETUP] to cancel.
5 When scanning is over, press [SETUP] to exit.
To cycle through only the memorized channels, use
[CHANNEL
/
].
To select a channel directly (including the ones not memorized), use [the Number buttons].
Note
•If the auto channel preset is canceled during presetting, some channels not yet preset may not be received.
•The selection will depend on how you receive the TV channels.
•You cannot change the channel when either VCR or DVD is in any recording mode (basic recording, onetouch timer recording or timer recording).
22 EN
CHANNEL SETTING
Adding / Deleting Channels
You may want to add or delete TV channels if your channel lineup changes or if you no longer watch some channels.
Adding channel is only available for the analog TV channels.
Make sure
•You perform “Auto Channel Scan” before adding or deleting the channels.
STANDBY-ON
SOURCE DTV/TV DISPLAY OPEN/CLOSE
|
|
|
A |
.@/: |
|
ABC |
DEF |
1 |
|
2 |
3 |
GHI |
|
JKL |
MNO |
4 |
|
5 |
6 |
PQRS |
|
TUV |
WXYZ |
7 |
|
8 |
9 |
. |
|
SPACE |
CLEAR |
|
0 |
|
|
DISC MENU |
|
|
SETUP |
|
|
o |
|
s |
|
OK |
B |
TITLE |
|
|
RETURN |
|
|
p |
|
j |
|
B |
i |
F |
h |
g |
C |
CHANNEL
--+
REC MODE VCR |
DVD |
TIMER |
REC |
|
AUDIO |
I |
|
|
|
TIMER |
|
CM SKIP D.DUBBING |
SET |
RAPID PLAY |
SEARCH |
|
|
1Press [DTV/TV] to select the mode (DTV or TV) to/from which you want to add/delete channels.
2 Press [SETUP].
3 Use [K / L] to select “Channel”, then press [OK].
“Channel” menu will appear.
4 Use [K / L] to select “Manual Channel
Preset”, then press [OK].
Channel
Auto Channel Preset
Manual Channel Preset
• If you are adding or deleting analog TV
channels, go to |
ANALOG |
to continue. |
• If you are deleting digital TV channels, go to DIGITAL to continue.
Instructions continue on the next page.
EN 23
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
CHANNEL SETTING
ANALOG
5Select the channel number to add or delete.
•Use [CHANNEL
/ ] to cycle through only the memorized channels.
•Use [{ / B] to cycle through all the channels including the ones not memorized.
•Use [the Number buttons] to select a channel directly.
•When a memorized channel is selected, “Add” is checked and highlighted as a default.
•When an unmemorized channel is selected “Delete” is checked and highlighted as a default.
6Use [K / L] to select “Add” or
“Delete”, then press [OK].VCR DVDManual Channel Preset
CH 2
Add
Delete
Your setting will be activated and it will automatically switch to the next channel so that you can continue adding or deleting channels.
7 Press [SETUP] to exit.
DIGITAL
5Select the channel number to delete.
•Only the major channel is displayed in “Manual Channel Preset” menu. (The channel number displayed in the parenthesis is a virtual channel number)
•Use [CHANNEL
/ ] to cycle through only the memorized channels.
•You cannot use [{ / B] for the digital TV channel selection.
•Use [the Number buttons] to select a channel directly.
•When a memorized channel is selected, “Add” is checked and highlighted as a default.
•When an unmemorized channel is selected “Delete” is checked and highlighted as a default.
6Use [K / L] to select “Delete”, then press [OK]. Then select the next channel to delete.
•If the setting is complete, press [RETURN] to activate “Manual Channel Preset”.
|
Manual Channel Preset |
VCR |
DVD |
|
|
|
|
DTV 2 (CH - - - )
Add
Delete
Your setting will be activated.
WARNING:
•For the digital TV channels, you cannot recover the deleted channels once they are deleted unless you perform the auto channel preset again.
7 Press [SETUP] to exit.
24 EN
SETTING THE CLOCK
Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 26.
Auto Clock Setting
This unit can set the time and date automatically by |
1 |
Press [SETUP]. |
|
||||
referring to a PBS station. |
|
|
|
||||
Make sure |
|
|
|
|
|
||
• The antenna/cable TV connections are correct. |
|
|
|||||
• Channels are set. (Refer to page 22.) |
|
|
|||||
• If this unit is connected to a cable/satellite box, |
2 |
Use [K / L] to select “Clock”, then |
|||||
select the local PBS station on them to set the clock |
press [OK]. |
|
|||||
automatically. |
|
|
|
|
|||
|
|
|
“Clock” menu will appear. |
||||
|
|
|
|
||||
|
|
|
STANDBY-ON |
3 |
Use [K / L] to select “Auto Clock |
||
|
|
|
|
||||
SOURCE |
DTV/TV |
DISPLAY OPEN/CLOSE |
Setting”, then press [OK]. |
||||
|
|
|
A |
|
|
||
.@/: |
|
ABC |
DEF |
|
|
||
1 |
|
2 |
3 |
|
Use [K / L] to select “Auto”, then |
||
GHI |
|
JKL |
MNO |
|
press [OK]. |
|
|
4 |
|
5 |
6 |
|
|
||
|
4 Auto Clock Setting |
|
|||||
PQRS |
|
TUV |
WXYZ |
VCR DVD |
|||
7 |
|
8 |
9 |
|
OFF |
|
|
. |
SPACE |
CLEAR |
|
Auto |
|
||
|
0 |
|
|
Manual |
|
||
|
|
|
|
|
|||
DISC MENU |
|
SETUP |
5 |
|
|
||
|
|
o |
|
Press [SETUP] to exit. |
|||
|
|
|
|
||||
s |
|
OK |
B |
|
|
||
TITLE |
|
|
RETURN |
|
|
||
|
|
p |
|
Press [STANDBY-ON y] to turn off |
|||
j |
|
B |
i |
|
|||
|
|
the unit. |
|
||||
|
|
|
|
|
|
||
F |
h |
g |
C |
|
This unit will search for the time only when the |
||
|
|
|
|
|
|||
|
CHANNEL |
|
6 power is off. Leave it off for several minutes to |
||||
-- |
|
+ |
|
give this unit time to set the clock. |
|||
REC MODE |
VCR |
DVD |
TIMER |
|
|
|
|
REC |
|
|
AUDIO |
|
|
|
|
I |
|
|
|
If the unit chooses an incorrect PBS channel, set the PBS |
|||
|
|
TIMER |
|
||||
CM SKIP D.DUBBING SET |
RAPID PLAY |
||||||
|
|
|
|||||
channel manually by following the steps below.
SEARCH
Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Note
•The clock may set itself automatically after you connect the antenna/cable signal to this unit and plug in the power cord.
•Only the analog PBS channel signal is effective for auto clock setting.
•The unit receives the clock data at 12:00 a.m. / p.m. from the PBS channel when the power is off.
|
Auto Clock Setting - Manual |
VCR |
DVD |
|
|
|
|
Set Channel No.
CH 1
Press [SETUP] and turn off the unit.
EN 25
Others
Español
SETTING THE CLOCK
Manual Clock Setting |
|
|
|
|
|
Daylight Saving Time |
|
|
|
|
|
||||||||||||
1 |
Press [SETUP]. |
|
|
|
|
When “Daylight Saving Time” is “ON”, the unit clock will |
|||||||||||||||||
|
|
|
|
automatically adjust the time in order to fit the daylight |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
saving time. |
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
“ON (MAR - NOV)” has been selected as the default. |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
2 |
Use [K / L] to select “Clock”, then |
1 |
Press [SETUP]. |
|
|
|
|
|
|||||||||||||||
press [OK]. |
|
|
|
|
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
“Clock” menu will appear. |
|
|
|
|
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
3 |
Use [K / L] to select “Clock Setting”, |
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
2 |
Use [K / L] to select “Clock”, then |
||||||||||||||||||||||
then press [OK]. |
|
|
|
|
|||||||||||||||||||
|
|
|
|
press [OK]. |
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
“Clock” menu will appear. |
||||||||||||
4 |
Use [K / L] to select calendar or time, |
|
|
Use [K / L] to select “Daylight Saving |
|||||||||||||||||||
then press [OK]. |
|
|
|
|
|
|
|||||||||||||||||
|
|
|
|
|
3 Time”, then press [OK]. |
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
|
|
|
Clock Setting |
VCR |
DVD |
|
|
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use [K / L] to select “ON (MAR - |
|||||||||
|
|
|
|
|
JAN / 01 / 2007 ( MON ) |
|
|
|
|
|
|
|
NOV)”, “ON (APR - OCT)” or “OFF”, |
||||||||||
|
|
|
|
|
|
12: 00 AM |
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
4 then press [OK]. |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
Use [{ / B] to select an item to set, |
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
Daylight Saving Time |
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
VCR |
DVD |
|
|
|
|||||||||||||
|
and use [K / L] to select the contents |
|
|
|
|
|
ON (MAR - NOV) |
|
|
|
|
|
|||||||||||
5 to suit your preference, then press |
|
|
|
|
|
ON (APR - OCT) |
|
|
|
|
|
||||||||||||
|
|
|
|
|
OFF |
|
|
|
|
|
|||||||||||||
|
[OK]. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
Clock Setting |
VCR |
DVD |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
JAN |
/ 01 / 2007 ( MON ) |
|
|
|
|
|
|
|
ON (MAR - NOV): |
|
|
|
|
|
||||
|
|
|
|
|
|
12: 00 AM |
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Move forward one hour on the second Sunday in |
|||||||||
|
Your setting will be activated. |
|
|
||||||||||||||||||||
|
|
|
March and move back one hour on the first |
||||||||||||||||||||
|
Although seconds are not displayed, they begin |
|
|
Sunday in November. |
|
|
|
|
|
||||||||||||||
|
counting from 0. |
|
|
|
|
|
|
ON (APR - OCT): |
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Move forward one hour on the first Sunday in |
|||||||||
6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
Press [SETUP] to exit. |
|
|
April and move back one hour on the last |
||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Sunday in October. |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
5 Press [SETUP] to exit. |
|||||||||||
Note
•Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds when you set the clock manually.
•For setting the day, year, hour, and minute,
[the Number buttons] can also be used.
•You can set the built-in calendar from the year 2006 up to 2056.
Note
•Select “ON” when currently utilizing the daylight saving time.
26 EN
TUNER SETTINGS
Switching Analog Mode /
Digital Mode
You can easily switch the analog TV (NTSC) and digital TV (ATSC) with the remote control and enjoy viewing the HDTV (high definition TV) programs as well as the SDTV (standard definition TV) programs with simple operation.
Press [DTV/TV] on the remote control.
•The analog mode and digital mode switch alternately.
•When you press [DTV/TV] in external input, the analog mode and digital mode will be switched.
Note
•When you switch the analog mode to the digital mode, it may take a while until the digital channel selection is completed. The following screen is displayed while switching the mode.
Now Scanning
Channel Selection
Select channels by using [CHANNEL
/ ] or [the Number buttons] found on remote control.
[CHANNEL
/ ]
Use [CHANNEL
/ ] to change the channel.
[the Number buttons]
Press the channel number with [the Number buttons] to select a channel you want to watch.
<Analog TV Channels>
Enter the channel number with [the Number buttons] to select a channel you want to watch.
For 1-digit number
e.g.) 2 ch: |
[0] + [2], [2] + [•] or |
|
[2] + leave it for 2 seconds. |
For 2-digit number |
|
e.g.) 12ch: |
[1] + [2] |
<Digital TV Channels>
Enter the major and minor channel number with [the Number buttons] to select a channel you want to watch.
For 1-digit number
e.g.) 2-2 ch: |
[0] + [2] or [2] + [•] |
major channel |
|
minor channel |
[0] + [2], [2] + [•] or |
|
[2] + leave it for 2 seconds. |
For 2-digit number |
|
e.g.) 35-16ch: |
[3] + [5] |
major channel |
|
minor channel |
[1] + [6] |
•If you enter 1 digit for major channel and leave it for 2 seconds, the number will be taken as the major channel and lowest minor channel of the major channel will be displayed.
•If there is no minor channel input, lowest minor channel of the major channel will be displayed.
Note
•In digital TV broadcasting, 2 or more channels, called minor channels, are simultaneously broadcast on one main channel, called major channel.
About digital TV broadcasting:
With its high definition broadcast, digital broadcasting far surpasses analog broadcasting in both its picture and sound quality.
What is the minor channel?
By using high compression technology, digital broadcasting offers a service that enables multiple signals to send simultaneously.
Therefore, you can select more than one program per major channel since digital broadcasting technology distinguishes between multiple channels broadcast by a signal network.
NTSC (analog mode) |
[Air Time] ATSC (digital mode) |
|||
|
18:00 |
|
|
|
|
smallest |
smallest |
||
|
CH4-1 |
|||
|
CH |
CH |
||
|
18:30 |
|||
|
|
|
||
|
|
|
||
|
CH4-1 |
CH4-2 |
CH4-3 |
|
CH4 |
19:00 |
|
|
|
smallest |
CH4-3 |
|||
|
CH4-1 |
|||
|
19:30 |
CH |
|
|
|
|
smallest |
||
|
CH4-1 |
CH4-2 |
||
|
|
|
CH |
|
20:00
major channel minor channel
: change automatically
: change manually by using [CH
/
]
EN 27
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
TUNER SETTINGS
This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be recorded.
Selecting TV Audio
STANDBY-ON
SOURCE DTV/TV DISPLAY OPEN/CLOSE
|
|
|
A |
.@/: |
ABC |
|
DEF |
1 |
2 |
|
3 |
GHI |
JKL |
|
MNO |
4 |
5 |
|
6 |
PQRS |
TUV |
|
WXYZ |
7 |
8 |
|
9 |
. |
SPACE |
CLEAR |
|
0 |
|
|
|
DISC MENU |
|
|
SETUP |
|
o |
|
|
s |
OK |
|
B |
TITLE |
|
|
RETURN |
|
p |
|
|
j |
B |
|
i |
F |
h |
g |
C |
|
CHANNEL |
|
|
-- |
|
|
+ |
REC MODE |
VCR |
DVD |
TIMER |
REC |
|
|
AUDIO |
I |
|
|
|
|
TIMER |
|
|
CM SKIP D.DUBBING |
SET |
RAPID PLAY |
|
Digital TV
1Press [AUDIO] to cycle through available audio languages.English 1/2
•When you press [AUDIO], selected language will be displayed on the TV screen.
•Every time you press [AUDIO], the language will be switched.
e.g.) English 1/3 → Spanish 2/3 → Other 3/3
•Available languages differ depending on the broadcast.
•The information display will automatically disappear in 1 minute.
•When you record digital TV broadcasting, the audio language you have selected will be recorded.
SEARCH
Note
•The timer recording for digital TV cannot record any audio language other than English.
•Pressing [AUDIO] does not control external device audio.
•When there is only one audio channel on the broadcast, pressing [AUDIO] does not display anything.
28 EN
TUNER SETTINGS
Selecting TV Audio (cont’d)
STANDBY-ON
SOURCE DTV/TV DISPLAY OPEN/CLOSE
|
|
|
A |
.@/: |
ABC |
|
DEF |
1 |
2 |
|
3 |
GHI |
JKL |
|
MNO |
4 |
5 |
|
6 |
PQRS |
TUV |
|
WXYZ |
7 |
8 |
|
9 |
. |
SPACE |
CLEAR |
|
0 |
|
|
|
DISC MENU |
|
|
SETUP |
|
o |
|
|
s |
OK |
|
B |
TITLE |
|
|
RETURN |
|
p |
|
|
j |
B |
|
i |
F |
h |
g |
C |
|
CHANNEL |
|
|
-- |
|
|
+ |
REC MODE |
VCR |
DVD |
TIMER |
REC |
|
|
AUDIO |
I |
|
|
|
|
TIMER |
|
|
CM SKIP D.DUBBING |
SET |
RAPID PLAY |
|
SEARCH
Analog TV
1 Press [SETUP].
2 Use [K / L] to select “Required
Settings”, then press [OK].
“Required Settings” menu will appear.
3Use [K / L] to select “TV Audio
Select”, then press [OK].
4Use [K / L] to select “Stereo” or
“SAP”, then press [OK].
TV Audio Select |
VCR DVD |
Stereo
SAP
Stereo:
Outputs main-audio.
SAP (secondary audio program):
Outputs sub-audio.
5 Press [SETUP] to exit.
Note on recording analog TV audio
•When you record an analog TV program available in second audio or stereo, you have to select either “Stereo” or “SAP” in “Required Settings” menu beforehand. Refer to the following table to check an appropriate setting.
Selected |
Broadcast |
Disc |
Audio |
audio |
audio |
recording |
output |
Stereo |
STEREO+SAP |
STEREO |
STEREO |
|
|
|
|
|
STEREO |
STEREO |
STEREO |
|
|
|
|
|
MONO+SAP |
MONO |
MONO |
|
|
|
|
|
MONO |
MONO |
MONO |
|
|
|
|
SAP |
STEREO+SAP |
SAP |
SAP |
|
STEREO |
STEREO |
STEREO |
|
|
|
|
|
MONO+SAP |
SAP |
SAP |
|
|
|
|
|
MONO |
MONO |
MONO |
EN 29
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
TUNER SETTINGS
DTV Closed Caption
Digital TV
Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC.
STANDBY-ON
SOURCE DTV/TV DISPLAY OPEN/CLOSE
|
|
|
A |
.@/: |
|
ABC |
DEF |
1 |
|
2 |
3 |
GHI |
|
JKL |
MNO |
4 |
|
5 |
6 |
PQRS |
|
TUV |
WXYZ |
7 |
|
8 |
9 |
. |
|
SPACE |
CLEAR |
|
0 |
|
|
DISC MENU |
|
|
SETUP |
|
|
o |
|
s |
|
OK |
B |
TITLE |
|
|
RETURN |
|
|
p |
|
j |
|
B |
i |
F |
h |
g |
C |
CHANNEL
--+
REC MODE VCR |
DVD |
TIMER |
REC |
|
AUDIO |
I |
|
|
|
TIMER |
|
CM SKIP D.DUBBING |
SET |
RAPID PLAY |
SEARCH |
|
|
1 Press [SETUP].
2Use [K / L] to select “Required
Settings”, then press [OK].
Use [K / L] to select “CC Style”, then press [OK].
3 |
|
|
|
|
|
|
|
|
|
|
|
Required Settings |
|
VCR |
DVD |
|
|
||
|
Video Input |
|
|
|
|
|
|
||
|
|
TV Aspect |
4:3 Letter Box |
|
|
||||
|
|
TV Audio Select |
Stereo |
|
|
||||
|
|
CC Style |
|
|
|
|
|
|
|
|
|
V-Chip |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4Use [K / L] to select “DTV CC”, then press [OK].
|
CC Style |
VCR DVD |
|
|
|
|
|
|
|
|
DTV CC |
OFF |
|
|
|
User Setting |
OFF |
|
|
|
Font Size |
Middle |
|
|
|
Font Style |
Style1 |
|
|
|
Edge Type |
NONE |
|
|
|
Font Opacity |
Solid |
|
|
|
Font Color |
White |
|
|
|
Back Opacity |
Solid |
|
|
|
Back Color |
Black |
|
|
|
|
|
|
|
|
|
|
|
|
5Use [K / L] to the desired DTV closed caption, then press [OK].
DTV CC |
VCR DVD |
OFF
Service1
Service2
Service3
Service4
Service5
Service6
OFF:
Select if you do not want DTV CC. This is the default.
Service 1 to Service 6:
Select one of these before changing any other item in the closed caption menu. Choose “Service 1” under normal circumstances.
Note |
6 |
Press [SETUP] to exit. |
• Even if you set “DTV CC” to anything other than |
|
|
“OFF”, its effect will temporarily be canceled while |
|
|
recording. |
|
30 EN
Loading...