The Magellan RoadMate receiver is a vehiclenavigation aid designed to assist you in arriving
at your selected destinations. When using
the Magellan RoadMate receiver, these safety
rules must be followed to prevent accidents
that can result in injury or death to yourself or
others:
Please check the applicable regulations in your
state regarding windshield mounting. Certain
states prohibit the mounting of any items on
your windshield. Go to www.magellanGPS.com
for alternative mounting solutions.
When driving, the need to view the display is
minimal. Voice prompts will guide you to your
destination. The driver should enter data or
program the Magellan RoadMate receiver only
when the vehicle is stationary. Only a vehicle
passenger should enter data or program the
Magellan RoadMate receiver while the vehicle
is moving. Do not become distracted by the
receiver while driving, and always be fully
aware of all driving conditions.
Keep the Magellan RoadMate receiver safe
from extreme temperature conditions. For
example, do not leave it exposed to direct
sunlight for an extended period of time.
Take care when mounting the Magellan
RoadMate receiver in your vehicle, whether
using the windshield mount or other mounts,
that it does not obstruct the driver’s view of
the road, interfere with the operation of the
vehicle’s safety devices such as air bags, or
present a hazard to occupants of the vehicle
should the receiver be dislodged while driving.
It is your responsibility to assess the risks
associated with damage to your vehicle or
vehicle occupants as the result of your choices
in mounting the Magellan RoadMate receiver.
Temperature
The maximum operating temperature is 140°F
(60°C).
Battery
It is your responsibility to comply with all
traffic laws and to use the Magellan RoadMate
and mounting options in such a manner that
the user is in compliance with applicable laws.
Roads, points of interest (POIs), business
and service locations may change over
time. As a result the database may contain
inaccuracy. Also, the database does not
include, analyze, process, consider, or
reflect any of the following: legal restrictions
(such as vehicle type, weight, height, width,
load and speed restrictions); road slope or
gradient; bridge height, width, weight or other
limits; population density; neighborhood
quality or safety; availability or proximity of
police, emergency rescue, medical or other
assistance; construction work zones or
hazards; road or lane closures; road, traffic or
traffic facilities’ safety or condition; weather
conditions; pavement characteristics or
conditions; special events; traffic congestion. It
is your responsibility to disregard any unsafe,
hazardous or illegal route suggestions.
The battery in the Magellan RoadMate receiver
is rechargeable and should not be removed. In
the event that it should need to be replaced,
please contact Magellan Technical Support.
Charging the Magellan RoadMate
An optional AC adapter is available as an
accessory for your Magellan RoadMate. Use
of another type of AC adapter can result in
malfunction and/or possible fire hazard due to
battery overheating.
Only use the car charger approved for/supplied
with your Magellan RoadMate receiver. Use of
another type of car charger will result in fire or
electric shock.
For safety reasons, the battery in your
Magellan RoadMate receiver will stop charging
when the ambient temperature is less than
32°F (0°C) or more than 113°F (45°C).
It will take approximately 4 hours of charging
the Magellan RoadMate receiver through
the vehicle power adapter or optional AC
adapter to obtain a full battery charge. It is
recommended that you charge the battery
initially for at least 2 hours.
Use only the charger approved for your
Magellan RoadMate receiver.
Estimated usage of the Magellan RoadMate on
battery power is approximately 2 hours.
Federal Communication Commission
Interference Statement
This equipment has been tested and found
to comply with the limits for class B digital
devices, in accordance with part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one of the following measures:
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. End users must follow the
specific operating instructions for satisfying
RF exposure compliance.
This transmitter must not be co-located
or operating in conjunction with any other
antenna or transmitter.
In order to maintain compliance with FCC
regulations, shielded cables must be used with
this equipment. Operation with non-approved
equipment or unshielded cables is likely to
result in interference to radio and TV reception.
The user is cautioned that changes and
modifications made to the equipment without
the approval of manufacturer could void the
user’s authority to operate this equipment.
Magellan RoadMate
Tested To Comply
With FCC Standards
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
FCC Caution:
Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.
FOR HOME OR OFFICE USE
The Magellan RoadMate receiver must be
installed and operated at a distance no closer
then 8 inches (20 cm) from the user.
This Class B digital apparatus meets all
requirements of the Canadian InterferenceCausing Equipment Regulations.
IC statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. This device may not cause interference
and
2. This device must accept any interference,
including interference that may cause
undesired operation of the device.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits established for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
One or more claims of the following patents may cover this product: U.S. patent No. 5,544,060, U.S.
patent No. 5,654,892, U.S. patent No. 5,832,408 and U.S. patent No. 5,987,375
The information provided in this document is subject to change without notice. Improvements
and enhancements to the product may occur without any formal notification. Check the Magellan
website (www.magellanGPS.com/support) for product updates and additional information.
Canada, avis d’Industry Canada (IC)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil
ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
All other products and brand names are trademarks of their respective holders.
No part of this user manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, for any purpose other than the purchaser’s personal use,
without the prior written permission of MiTAC International Corporation.
The information provided in this document are correct at the time that it is created.
MiTAC International Corporation assumes no responsibility or liability for any errors or inaccuracies that may
Setting the GPS Position .......................................................................................26
Viewing the GPS Status ......................................................................................... 26
Auto Power Off ............................................................................................................. 26
Setting Auto Power Off .......................................................................................... 26
Default System Settings ..............................................................................................26
Restoring All Default System Settings .................................................................. 26
Product Information ..................................................................................................... 26
Viewing Product Information ................................................................................ 26
iv
This user manual will give you the necessary
information on how to use the various features of the
Magellan RoadMate receiver.
Visit us at magellanGPS.com/support
Connect with us
@MagellanGPS
MiTAC Digital Corporation
471 El Camino Real, Santa Clara, CA 95050 USA
www.magellanGPS.com
Magellan RoadMate GPS Receiver
The Magellan® RoadMate® receiver is a
vehicle navigation product that utilizes GPS
signals from satellites to calculate your
precise location and compute navigational
information that can be used to guide you to
your destination. Knowing its position and
movement, it can then overlay this information
on detailed maps to provide a visual
representation of your location.
With the Magellan RoadMate receiver you can:
Save searches and addresses under the
OneTouch™ menu for fast, convenient access
to favorite destinations.
Store your home address and quickly get
routing details to your home.
Enter and save addresses in your address
book that can be accessed at any time and get
routing information to that address.
Route to an address that you enter using the
QuickSpell™ and Smart City search for easy,
errorless address entry.
Route to any point of interest (POI) that has
been preloaded into your Magellan RoadMate
receiver. These include hospitals, restaurants,
shopping malls, recreational locations such as
parks, basinals and canyons, and more.
With the Magellan RoadMate, you can find and
explore POIs and get to your routes quickly.
See live traffic (on certain models) and use our
updated maps and POI database.
Create and customize routes and settings,
knowing that Magellan RoadMate always will
be the only vehicle navigation product that
aid you to find to your destination. Our software
leaves no exceptions on cutting edge mapping,
low-power battery consumption, and safe and
secure technology for your navigation needs.
The Magellan RoadMate receiver has a built-in
battery so, in most cases, you will be able to
follow these instructions while reading them
on your computer screen without plugging
the Magellan RoadMate receiver to the AC
power using an optional AC power adapter. You
should note that while indoors you may not
get strong enough satellite signals to compute
your location, so your location information may
not be updated. However, the power of the GPS
chipset installed in the Magellan RoadMate
receiver will pick up satellite signals in some
very demanding locations. You may find that
the Magellan RoadMate receiver is computing
a position, even indoors. Even with the
improved GPS chipset, the receiver may not be
able to always compute a fix indoors.
Create a route with multiple destinations.
Handy for business people who need routing
information to many destinations.
View POIs that are near exits ahead of you on
the highway. The Highway Exit POIs function
provides you with a list of gas stations,
restaurants, hotels and auto repair shops
located nearby exits you are approaching while
travelling on the interstate.
Customize your Magellan RoadMate receiver
to meet your needs using the Settings menu.
Receive traffic information so as to avoid
delays in your travel (certain models).
This is especially important to note if you are in
a garage or other overhanging structure. If you
find you are not getting strong enough satellite
signals while in a garage or other structure,
move to a location where there is a clear view
of the sky and you should immediately see an
improvement in signal strength.
The Magellan RoadMate receiver includes
Voice Alerts (Text-to-Speech) for driving
instructions.
Thank you for using the Magellan RoadMate.
1
B
C
D
A
Magellan RoadMate
(A) Power button
(B) Audio out
(C) MicroSD card slot. (not available on all receivers) The microSD card is available for
accessing optional map regions. Check the Magellan store at www.magellangps.com for
additional map regions that may be available for your receiver.
(D) USB Connection. Power input from vehicle power adapter cable or optional AC power
adapter. Also used for connecting your receiver to a personal computer for updating maps
and software using the Magellan Content Manager application.
Reset
The reset button is located on the back of the receiver in the lower right corner. If you have
problems with your receiver or in the unlikely event that it locks up, use a paperclip and gently
insert it into the reset hole to press the reset button with the receiver turned on. The receiver
should restart with the factory defaults loaded.
2
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.