Simply Connected
User Guide
XAP-1500
High Power Dual-Band Wireless 900N
Low Profile Access Point
Use the XAP-1500 to:
Deliver Broader Wi-Fi Coverage and Eliminate Client Device Roaming Issues with Fewer APs
Maximize Data Rates with Concurrent Dual-Band (2.4GHz and 5GHz) Technology
Optimize VoIP, Streaming Media and Other Demanding Applications
Create a Secure Guest Network
Simplify Wi-Fi Installation while Minimizing Setup Time and Costs
Minimize Unsightly Cables and Equipment
XAP-1500
User Guide
Model Number: XAP-1500
Luxul High Power Dual-Band Wireless 900N Low Profile Access Point
FCC ID: W59XAP1500
IC: 8584A-XAP1500
© 2014 Luxul. All Rights Reserved.
No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this manual is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design. No license is granted, either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied license only exists for equipment, circuits and subsystems contained in this or any Luxul product.
This product is covered by one or more U.S. and foreign patents.
Patents: 7,379,717, 6,606,075, 6,373,448, other patents pending
DOCUMENT CONVENTIONS
The following graphical alerts are used in this document to indicate notable situations:
NOTE: Tips, hints, or special requirements that you should take note of.
CAUTION: Care is required. Disregarding a caution can result in data loss or equipment malfunction.
WARNING!: Indicates a condition or procedure that could result in personal injury or equipment damage.
CONTACT LUXUL
Sales |
Technical Support |
P: 801-822-5450 |
P: 801-822-5450 |
E: sales@luxul.com |
E: support@luxul.com |
FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
2 |
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 |
|
LUX-UG-XAP-1500 Vers: 07314 |
||
|
|
User Guide |
CONTENTS |
|
DOCUMENT CONVENTIONS |
2 |
FCC COMPLIANCE |
2 |
1 INTRODUCTION |
4 |
1.1 Warnings |
4 |
1.2 Site Preparation |
5 |
2 XAP-1500 SPECIFICATIONS |
5 |
3 GETTING STARTED |
6 |
3.1 System Requirements |
6 |
3.2 Package Contents |
6 |
4 HARDWARE FEATURES AND INSTALLATION |
7 |
4.1 Front View |
7 |
4.2 Rear View |
8 |
4.3 Environmental Requirements |
8 |
4.4 Hardware Installation |
9 |
5 CONFIGURATION |
11 |
5.1 Login |
11 |
5.2 Quick Setup |
12 |
5.3 Wireless |
15 |
5.4 Network |
18 |
5.5 Administration |
19 |
5.6 Status |
25 |
5.6.2 Connections |
26 |
6 REGULATORY COMPLIANCE |
26 |
© 2014 Luxul. All Rights Reserved. |
3 |
|
Other trademarks and registered trademarks are the property of their respective owners |
||
|
XAP-1500
1 INTRODUCTION
Congratulations on your purchase of the Luxul XAP-1500 - High Power Dual-Band Wireless Low Profile Access Point. The XAP-1500 is designed for use in residential and commercial Wi-Fi installations—delivering optimal wireless network performance. With this high powered, concurrent dual-band wireless access point, wireless devices that are compatible with 802.11a/b/g/n can sustain high data rates and improved overall performance at significantly greater distances.
The XAP-1500 features Luxul’s web based management interface. provides a simple method for setting up the wireless network. The XAP-1500 is also enabled for installation simplicity when installed with Luxul Routers, Gigabit Switches, and other Luxul products.
XAP-1500 Features:
Highest FCC Approved Performance (Effective EIRP 36dBm) for Farther Reaching Signal and Maximum Data Rates
Complies with IEEE 802.11n Standard. Backward Compatible with IEEE 802.11a/b/gSupports WMM QoS Functionality to Prioritize Multimedia Traffic
Enhanced Multi-Level Security with WPA-PSK (TKIP, AES, TKIP & AES), WPA2-PSK (AES), WPA-PSK/WPA2-PSK Personal (TKIP & AES) and 128-bit WEP
Supports up to 12 SSIDs - 6 on 2.4GHz and 6 on 5GHz with Individual Security SettingsMultiple SSIDs Support with VLAN Tagging (1 VLAN per SSID)
Single Cable Installation with PoE (requires the use of enclosed injector)Firmware Upgradeable
Easy 3 Step Setup through Web-based User Interface
Enabled for Maximum Compatibility and Performance with other Luxul Products
Install on Wall, Ceiling or Desktop
1.1 Warnings
Read all installation instructions and site survey reports, and verify correct equipment installation before connecting this device to its power source.
Connect all power cords to a properly wired and grounded electrical circuit.Verify that the electrical circuits have appropriate overload protection.
Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment operation specifications.
Products outside the approved configurations may be in violation of Part 15 of the FCC Rules.
4 |
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 |
|
LUX-UG-XAP-1500 Vers: 07314 |
||
|
User Guide
1.2 Site Preparation
Consult your site survey and network analysis reports to determine specific equipment placement, power drops, and so on.
Assign installation responsibility to the appropriate personnel.
Identify and document where all installed components are located.Ensure adequate, dust-free ventilation to all installed equipment.Identify and prepare Ethernet connection.
Verify that cable lengths are within the maximum allowable distances for optimal and certified signal transmission.
2 XAP-1500 SPECIFICATIONS
Standards Compliance 802.11n (900Mbps)
Interface Two 10/100/1000M Ports
Antenna Three Internal 5GHz and Three Internal 2.4GHz High
Performance Antennas
Button Reset button
Power PoE (Injector Included)
Dimensions D x H in. (mm) 8”x1” (203.2x25.4)
LEDs Power, 2.4GHz, 5GHz
(Can be turned Off/On Via User Interface)
Wireless and Other Features
Frequency Concurrent 2.4GHz and 5GHz
Wireless Speed 2.4GHz: 450Mbps;5GHz: 450Mbps.
Wireless Security 64/128bit WEP, WPA-PSK, WPA2-PSK, WPA/WPA2
Operating Modes Wireless AP
Other Functions and Features Remote Web Management
System Logging
Backup & Restore Configurations
VLAN/Guest Network SupportSupport for Setup on iOS and
Android DevicesQoS Support
Up to 12 SSIDs
Firmware Upgradeable via Browser
Certifications CE, FCC, RoHS
© 2014 Luxul. All Rights Reserved. |
5 |
|
Other trademarks and registered trademarks are the property of their respective owners |
||
|
XAP-1500
3 GETTING STARTED
3.1 System Requirements
Devices Supporting 802.11a, 802.11b, 802.11g or 802.11n
Web Browser (Microsoft IE 9.0 and up, Mozilla Firefox 24 and up, Safari 5.1 and up, Google Chrome 18 and up)
CAT5/6 Ethernet Cable, CAT6 recommendedAC Power Socket (100 – 240 V, 50/60 Hz)
3.2 Package Contents
XAP-1500 Wireless Access PointMounting Ring and Hardware
Single Port PoE Injector and Power Adapter2-CAT6 patch cables
Quick Install Guide
NOTE: If any of the listed items are missing or damaged, please contact the reseller from whom you purchased for return/replacement.
3.3 Safety Information
To maintain the safety of users and property, follow these safety instructions:
The XAP-1500 wireless access point is designed for indoor use only. DO NOT place this access point outdoors. If you require an outdoor access point, please consider the Luxul XAP-1040.
DO NOT install this access point in or near hot or humid places, such as a kitchen or bathroom. Take care to minimize exposure to excessive heat or moisture.
DO NOT pull any connected cable with force. When disconnecting cables, do so by disconnecting first from the access point. When reconnecting, connect the AP first and then the Power/data source.
Accessories of this access point, such as mounting screws, the PoE injector and power supply may be dangerous to small children under 3 years of age. KEEP All ACCESSORIES OUT OF THE REACH OF CHILDREN!
The access point may become hot when in use for extended time periods. This is normal and is not a malfunction. DO NOT install this access point where it will be exposed to paper, cloth or other flammable materials.
6 |
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 |
|
LUX-UG-XAP-1500 Vers: 07314 |
||
|
User Guide
The XAP-1500 contains no user-serviceable parts. If the access point is not working properly, contact your dealer and ask for help. DO NOT attempt to disassemble the access point.
4 HARDWARE FEATURES AND INSTALLATION
4.1 Front View
The XAP-1500 has three LEDs, positioned on the side of the access point 1) Power, 2) 2.4GHz wireless activity and 3) 5GHz wireless activity.
NOTE: The LEDs may be enabled or disabled through the user interface. The LEDs are enabled by default.
XAP-1500 Front View
Status Indicators:
The following table describes the LED functionality:
Indicator |
|
Description |
Power |
On |
The power is on |
|
Off |
No power, check power connections |
2.4 GHz Status |
Flashing |
Indicates 2.4 GHz wireless activity |
|
Off |
The wireless radio is not active and wireless access |
|
|
is disabled |
5 GHz Status |
Flashing |
Indicates 5GHz wireless activity |
|
Off |
The wireless radio is not active and wireless access |
|
|
is disabled |
At startup, the Green Power LED will stay on while the 2.4GHz and 5GHz LEDs will blink once the wireless networks are functional. Note: LEDs may be enabled or disabled through the user interface. LEDs are enabled by default..
© 2014 Luxul. All Rights Reserved. |
7 |
|
Other trademarks and registered trademarks are the property of their respective owners |
||
|
XAP-1500
4.2 Rear View
The back of the XAP-1500 provides two RJ-45 connections. The first port is used to deliver both power and data to the access point and is labeled PoE. The second port is optional and may be used as a switch port to connect any other device to the network.
The reset button is also located on the back of the AP for restoring the access point to factory default settings.
First port delivers both |
|
power and data |
Second port is optional |
XAP-1500 Rear View
To Restore the Default Settings:
With the XAP-1500 powered on, press and hold the Reset button for 15 seconds. Release the reset button. The XAP-1500 will reboot and be reset to factory defaults.
CAUTION: Please note that pressing and holding the Reset button will remove any custom configurations done to the XAP-1500.
4.3 Environmental Requirements
Ethernet cable to PoE injector to provide Power and Data to the XAP-1500.
A device with a Web browser. Supported Web browser versions include Microsoft IE 9.0 and up, Safari 5.1 and up, Mozilla Firefox 24 and up, and Google Chrome 18 and up. The Web browser is used to configure the XAP-1500.
The XAP-1500 uses 48VDC power. The PoE injector power supply requires AC 100V ~ 240V, 50Hz ~ 60Hz.
Temperature of the operating environment: 32F~131F (0C~55C). Be sure to place the access point away from heat generating devices.
Humidity of the operating environment: 5%-95% non-condensing. Do not place the access point in an extremely dirty or damp location.
8 |
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 |
|
LUX-UG-XAP-1500 Vers: 07314 |
||
|
User Guide
Keep the access point away from strong electromagnetic fields (i.e. Air Conditioner compressors, fluorescent light ballasts, CRT monitors/televisions, etc.), and free from vibration, dust and direct sun light.
4.4 Hardware Installation
4.4.1 Access Point Placement
This XAP-1500 uses an omnidirectional antenna. The ideal placement is the center of the desired coverage area.
4.4.2 Mounting the Access Point on a Wall or Ceiling
The XAP-1500 may be installed on a wall, ceiling or desktop (flat surface). A separate mounting ring is included for ease of installation. The Quick Install Guide (QIG) has a mounting template to assist in positioning the AP correctly.
XAP-1500 mounted on a ceiling XAP-1500 mounted on a wall
© 2014 Luxul. All Rights Reserved. |
9 |
|
Other trademarks and registered trademarks are the property of their respective owners |
||
|
Loading...