Installation Manual
Mechanical Rate of Flow Indicator
Eddy Current Type
Features
• Smooth, noiseless operation.
• Instantaneous response.
• No point fluctuation.
• Negligible torque.
• All ranges start at zero.
• Available for all meter sizes.
Materials
Cast Aluminum case.
Ball bearings throughout.
Mounting
Mounted on a specially designed adjuster cover with a standard pinion gear fastened to the tach drive
shaft. The tach is driven off the meter drive shaft by a standard face gear.
Standard Dial Faces
GPM, LITRES / minute, and DEKALITRES / minute at rated flow of the individual meters.
Flow of LC Meter for Tach
This tach is unidirectional so the direction of flow must be stated on the order for the Liquid Controls Meter.
If LC Meter flow direction is changed in the field, consult the factory for proper changeover procedure.
Do not run tach backwards, as this will damage this precision unit. On all new mechanical tach deliveries,
start up meter on low flow to determine if tach is indicating proper direction.
Installation: M100-40
www.lcmeter.com
M-5, M-7, M-10, M-15, M-25
M-30, M-40
M-60, M-80, MS-7, MS-15, MS-30
2
Loading...