Gigabit Ethernet Switch with 24-port
10/100/1000 with 4 shared SFP slots,
SGE2000P
PoE and stacking
SGE2000P is optimized for maximizing system availability with fully redundant
stacking, redundant power options, and dual images for resilient firmware upgrades.
The SGE2000P is able to secure the network through IEEE 802.1Q VLANs, IEEE 802.1X
port authentication, Access Control Lists (ACL), DOS prevention, and MAC-based
filtering. The enhanced QoS and traffic management features ensure clear and reliable
IP voice and video communications.
For Wireless or VoIP deployments, the SGE2000P supports the IEEE802.3af standard
for Power over Ethernet (PoE). With automatic load sensing, the power control circuitry
automatically detects PoE on the end-device before providing power. For safety, each port
has independent overload and short-circuit protection, along with LED indicators for power
status. A maximum of 15.4W is available on the FE ports for powering PoE-enabled wireless
APs or VoIP handsets, with a maximum per device PoE delivery of 185W available for all ports.
The SGE2000P provides an intuitive, secure management interface enabling network
administrators to better utilize its comprehensive management feature-set, resulting in a
better optimized and more secure network.
Linksys Business Series SFE and SGE Stackable switch products are Linksys One Ready. That
means they include the necessary firmware to be seamlessly integrated into a Linksys One data
or data/voice network. Once connected, a Linksys One Service Router will discover the SFE/SGE
device, automatically configure it and make it available to other users on the network. Linksys One
technology is automatic and self-configuring. When Linksys One Voice Gateways, IP Phones and
other Linksys One peripherals are connected to a Linksys One Ready Ethernet switch’s ports, small
businesses are ready to communicate in a matter of minutes.
Fully resilient stacking
provides optimized
growth with simplified
management
Provides IEEE 802.3af
PoE power to IP phones,
surveillance cameras,
or APs
Maximum security and
control of traffic with
policing, shaping, ACLs,
and QoS
Linksys One Ready - simple,
automated installation
with Linksys One Services
Routers present
24-Port 10/100/100 Gigabit
Ethernet Switch with PoE
Model: SGE2000P
PRODUCT DATA
BUSINESS SERIES
Features
•
24 10/100/1000 Ethernet
ports
•
4 SFP slots (shared with
4 copper ports) for Fiber
Gigabit Ethernet expansion
•
IEEE 802.3af PoE on
delivered over any of the 24
10/100/1000 copper ports
•
A maximum of 15.4W is
available on the copper
ports for powering PoE
enabled wireless AP or VoIP
handsets, with a maximum
per device PoE delivery of
185W available for all ports
•
Dual images for resilient
firmware upgrades
•
48 Gbps, non-blocking,
Store-and-Forward
switching capacity
•
Simplified QoS management
using 802.1p, Diffserv or
ToS traffic prioritization
specifications
•
Power redundancy when
used with Linksys Business
Series Redundant Power
Supply unit
•
Fully resilient stacking
provides optimized growth
with simplified management
•
Access Control Lists (ACL) for
granular security and QoS
implementation
•
Management enables
configuration and
monitoring from a standard
web browser
•
Secure remote management
of the switch via SSH and
SSL encryption
24-Port 10/ 100/100 Gigabit
Ethernet Switch with PoE
Specifications
Model SGE2000P 24-Port 10/ 100/1000 Gigabit Ethernet Switch with PoE
Ports 24 RJ-45 Connectors for 10BASE-T/100BASE-TX/1000Base-T
with 4 Shared Gigabit SFP Slots
Console Port
Auto MDI/MDI-X
Autonegotiate/Manual Setting
RPS Port for Connecting to Redundant Power Supply Unit
Buttons Reset Button
Cabling Type UTP CAT 5 or Better for 10BASE-T/100BASE-TX,
UTP CAT 5e or Better for 1000BASE-T
LEDs PWR, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 - 8
PoE
IEEE 802.3af PoE Delivered Over Any of the 24 10/100/1000 Ports
Power Budget Allows for Max Power of 15.4W on Up
to 12 Ports Simultaneously
Performance
Switching Capacity Up to 48 Gbps, Non-Blocking
Stacking
Stack Operation Up to 8 Units in a Stack (192 Ports)
Hot Insertion and Removal
Ring and Chain Stacking Options
Master and Backup Master for Resilient Stack Control
Auto-Numbering or Manual Configuration of Units in Stack
Layer 2
MAC Table Size 8K
Number of VLANs 256 Active VLANs (4096 Range)
VLAN Port-Based and 802.1Q Tag-Based VLANs
Protocol-Based VLAN
Management VLAN
Private VLAN Edge (PVE)
GVRP
HOL Blocking Head of Line Blocking Prevention
Layer 3
Layer 3 Options Static Routing
CIDR (Classless Interdomain Routing)
128 Static Routes
IPv4
Forwarding in Silicon - Wirespeed Forwarding of Layer 3 Traffic
PRODUCT DATA
BUSINESS SERIES
Management
Web User Interface Built-In Web UI for Easy Browser-Based Configuration (HTTP/HTTPS)
SNMP SNMP Version 1, 2c, 3 with Support for Traps
SNMP MIBs RFC1213 MIB-2, RFC2863 Interface MIB, RFC2665 Ether-like MIB,
RFC1493 Bridge MIB, RFC2674 Extended Bridge MIB (P-Bridge, Q-Bridge),
RFC2819 RMON MIB (Groups 1,2,3,9 only), RFC2737 Entity MIB,
RFC3621 Power Ethernet MIB, RFC 2618 RADIUS Client MIB RFC 1215 Traps
RMON Embedded Remote Monitoring (RMON) Software Agent Supports Four
RMON Groups (History, Statistics, Alarms, and Events) for Enhanced Traffic
Management, Monitoring, and Analysis.
Firmware Upgrade Web Browser Upgrade (HTTP) and TFTP
Dual Images for Resilient Firmware Upgrades
Port Mirroring Traffic on a Port can be Mirrored to Another Port for Analysis with
a Network Analyzer or RMON Probe
•
802.1Q based VLANs enable
segmentation of networks
for improved performance
and security
•
Private VLAN Edge for
simplified network isolation
for guests connections or
autonomous networks
•
Automatic configuration
of VLANs across multiple
switches through GVRP/
GARP
•
User/Network port
level security via 802.1x
authentication and
MAC-based filtering
•
Increased the bandwidth
and added link redundancy
with Link Aggregation
Control Protocol (LACP)
•
Enhanced rate limiting
capabilities, including back
pressure and Multicast and
Broadcast Flood Control
•
Port Mirroring for noninvasive monitoring of
switch traffic
•
Mini Jumbo frame support
(1600 bytes)
•
SNMP v1, v2c, v3 and RMON
support
•
Fully rack-mountable using
the included rack-mounting
hardware
•
Linksys One Ready - Simple,
one-step automated
installation and initial
configuration
Other Management Traceroute
Single IP Management
Secure Socket Layer (SSL) security for Web UI
Secure Shell (SSH)
RADIUS
Port Mirroring
TFTP Upgrade
DHCP Client
BootP
SNTP
Xmodem Upgrade
Cable Diagnostics
PING
Syslog
Telnet Client (SSH secure support)
Security
IEEE 802.1x 802.1x - RADIUS Authentication. MD5 Hash
Guest VLAN
Single/Multiple Host Mode
Access Control ACLs - Drop or Rate Limit Based on:
Source and Destination MAC-Based
Source and Destination IP address
Protocol
Port
VLAN
DSCP/IP Precedence
TCP/UDP Source and Destination Ports
802.1p Priority
Ethernet Type
ICMP Packets
IGMP Packets
Up to 1018 Rules
Availability
Link Aggregation Link Aggregation using IEEE 802.3ad LACP
Up to 8 Ports in up to 8 Groups
Storm Control Broadcast and Multicast Storm Protection
DOS prevention DOS Attack Prevention
Spanning Tree IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree,
IEEE 802.1s Multiple Spanning Tree, Fast Linkover
IGMP Snooping IGMP (v1/v2) Snooping Limits Bandwidth-Intensive Video Traffic to Only
the Requestors. Supports 256 Multicast Groups
Power Redundancy Connection to RPSU for Power Redundancy
PRODUCT DATA
BUSINESS SERIES
QoS
Priority levels 4 Hardware Queues
Scheduling Priority Queuing and Weighted Round Robin (WRR)
Class of Service Port-Based
802.1p VLAN Priority Based
IPv4 IP Precedence/TOS/DSCP Based
Diffserv
Classification and Remarking ACLs
Rate Limiting Ingress Policer
Egress Rate Control
Standards
802.3 10BASE-T Ethernet, 802.3u 100BASE-TX Fast Ethernet,
802.3ab 1000BASE-T Gigabit Ethernet, 802.3z Gigabit Ethernet,
802.3x Flow Control, 802.3 ad LACP,802.3af POE, 802.1d STP,
802.1Q/p VLAN, 802.1w Rapid STP, 802.1s Multiple STP,
802.1x Port Access Authentication
Environmental
Dimensions 17.32" x 14.70" x 1.73"
W x H x D 440 x 375 x 44 mm
Unit Weight 15.85 lb (7.19 kg)
Power 48VDC
Certification UL (UL 60950), CSA (CSA 22.2), CE Mark, FCC Part 15 (CFR 47) Class A
Operating Temperature 32 to 104ºF (0 to 40ºC)
Storage Temperature -4 to 158ºF (-20 to 70ºC)
Operating Humidity 10 to 90% Relative Humidity, Noncondensing
Storage Humidity 10 to 95% Relative Humidity, Noncondensing
Package Contents
•
SGE2000P Ethernet Switch
Console Cable
•
AC Power Cord
•
Rack-Mount Kit
•
Quick Installation Guide
•
Minimum Requirements
•
Web Browser - Mozilla Firefox 1.5 or Later, IE 5.5 or Later, Netscape 7.01 or Later
Cat5 Ethernet Network Cable
•
•
TCP/IP Protocol Installed on Each Computer Within the Network
•
Network Adapter Installed in Each Computer
•
Network Operating System
•
Provider Support for CPE Software Version 1.2 or Higher
Linksys
A Division of Cisco Systems, Inc.
121 Theory
Irvine, CA 92617 USA
E-mail: sales@linksys.com
support@linksys.com
Web: http://www.linksys.com
Linksys products are available in more
than 50 countries, supported by
12 Linksys Regional Offices throughout
the world. For a complete list of local
Linksys Sales and Technical Support
contacts, visit our Worldwide Web Site
at www.linksys.com.
PRODUCT DATA
BUSINESS SERIES
Check the product package and contents for specific features supported. Specifications are subject to change without notice. Linksys is a registered trademark or
trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2007 Cisco Systems, Inc. All rights reserved. Other brands
and product names are trademarks or registered trademarks of their respective holders.
7031210B-RR Model: SGE2000P
Loading...