Linear AP-5 Specsheet

Linear AP-5
Access
Controller

The only
choice for
true flexibility.

The Linear AP-5 standalone multipurpose wireless access controller
is designed for easy installation and maximum exibility in a broad
range of access control applications. Three separate relays
(access, obstacle, and one congurable to either access or
obstacle) make the AP-5 easy to set up, program, and congure.

For commercial properties, it is ideal for controlling gate and door
access points and triggering up to six obstacles for swing or slide
gates. Typical applications include controlling vehicular gates,
pedestrian gates, door strike and mag-locks, or any combination.
Its wireless design and smaller size make it suitable for mounting
near all access devices. The AP-5 represents tremendous value
with many operational and safety features.

Access

Access Obstacle

Linear AP-5 standalone
multipurpose wireless
access controller

AccessObstacle Obstacle

All these brands are now under one name.

Linear AP-5 Standalone Multipurpose Wireless
Access Controller

Access Pro
model AP-5

Gate Operator Gate ObstacleTransmitter Wireless Keypad Block-Coded Transmitters

Integrates seamlessly with Linear access control products

SUMMARY:

Multipurpose wireless access controller ideal for vehicular gate, pedestrian gate, or entry door access. Easy to set up, configure, and pr ogram.

FEATURES:

IIIIII Three relay outputs offer flexibility to control mixed gate/door entry

points or trigger obstacle inputs

IIIIII Supports six fully supervised gate safety edge transmitters for swing or

slide gates

IIIIII Access relay activation time programmable up to 120 seconds
IIIIII Access relays are programmable for timed or latch operation
IIIIII Compatible with Linear’s block-coded MegaCode transmitters

GENERAL SPECIFICATIONS:

IIIIII OUTPUTS

Relay: three Form “C” relays, rated at 1 amp @ 24 volts AC or DC; access, ob-

stacle, and one configurable to either access or obstacle

Display: three seven-segment displays to provide system activity and program

data; LEDs used in conjunction with displays to provide transmitter and radio

activity

IIIIII INPUTS

RF: integral 318 MHz superheterodyne receiver @ -100 dBm sensitivity (nominal);

receives MegaCode transmitters

Open Request: terminal input and button activation triggers the

control relay

Keypad: integral 16-key membrane-style keypad with

tactile feedback

IIIIII POWER

12 to 24 volts AC or DC, 190 mA maximum

IIIIII OPERATING TEMPERATURE

-22° to +170°F (-30° to +77°C)

IIIIII DIMENSIONS

3.625 in W x 5.25 in H x 1.5 in D (92 x 133 x 38 mm)

IIIIII Supports 480 block-coded transmitters or 238 individual

transmitters/wireless keypad entry codes

IIIIII Excellent security with over 1,000,000 possible codes
IIIIII Built-in radio receiver virtually immune to RF or wireless signal noise
IIIIII 500 feet of radio range; range can be extended with EXA-2000
IIIIII Operates on 12–24 volts, AC or DC; can be powered by gate operator
IIIIII Learning or suspending transmitters is simple
IIIIII Program data is stored in non-volatile EPROM

IIIIII STANDARD

9-1/2 inch whip antenna; 3 feet of coaxial cable; barrel connector

COMPATIBLE ACCESSORIES:

Antennas:

EXA-1000: remote, omnidirectional; includes mounting hardwar e and five feet of

cable

EXA-2000: remote, directional-type; includes mounting hardwar e and ten feet of

cable

Wireless Keypad: Linear’s MDKP and MDTK

Transmitters: Linear’s block-coded MegaCode models

Visor-style models:

MDT-1B 1-channel

MDT-2B 3-channel

MDT-4B 5-channel

MT-1B 1-channel

MT-2B 2-channel

Key ring-style models:

ACT-31B 1-channel

ACT-34B 4-channel

ACT-31C 1-channel custom

ACT-34C 4-channel custom

USA & Canada [phone] & [phone]

[phone] - Toll Free FAX [phone]

Copyright 2011, Linear LLC Printed in China P/N 228242C

www.linearcorp.com