Linear AM-KP User Manual
AM-KP
Access
Control
Keypad
Installation
Instructions
INTRODUCTION
The AM-KP keypad is designed for use with Linear’s
AM/II access control system. The keypad is housed in a
rugged cast aluminum enclosure. The die-cast keys have
bright, easy-to-read yellow graphics. Each key has a
positive tactile “click” feel when pressed. An internal
sounder signals when a key is pressed.
The keypad can be mounted to a pedestal or directly to
a wall. A keylock secures the keypad to the mounting
backplate.
An incandescent panel lamp lights the keypad for
nighttime use. Red, green and yellow indicators show
power, access and lockout conditions.
The AM-KP is normally powered from the AM/II control,
or can be powered locally from a 12 VDC power supply.
Robust static and lightning protection circuits safeguard
the keypad’s electronics.
A rotary switch selects the keypad’s device address.
Each device connected to the AM/II must be set to a
different device address.
1. AM-KP FEATURES
2. PLAN INSTALLATION 3. MOUNT BACKPLATE 4. ROUTE CABLE
*
5
6
7
8
9
0
#
1
2
3
4
(760) 438-7000 • FAX (760) 438-7043
USA & Canada (800) 421-1587 & (800) 392-0123
Toll Free FAX (800) 468-1340
www.linearcorp.com
DEVICE
ADDR ESS
SELECTOR
(1 -6)
POW ER/DATA
TER M INA LS
SOUNDER
KEYLOCK
*
5
6
7
8
9
0
#
1
2
3
4
TAC TILE
KEYPAD
YELLO W "LOC KOU T"
INDICATOR
RED/GREEN POW ER/ACCESS
INDICATOR
NIGHT LIGHT
LOBBY
ACCOUNTING
SERVICE
SALES
COMPUTER
ROOM
V.P.
V.P.
SALES
PURCH.
ENGINEERING
BATH
BATH
STOR.
COPIER
AREA
CHIEF
ENG.
LAB
PRESIDENT
AM/II
CONTROL
COMMERICAL
INSTALLATION
AM-KP
ACCESS
KEYPADS
CARD
READERS
(USING AM-CRI
INTERFACE)
APARTMENT GATE
INSTALLATION
PLAN THE LOCATIONS
FOR CONTROL AND
REMOTE DEVICES
AM-KP
ON
PEDESTAL
AM/II
CONTROL
PLAN CABLE RUNS
BETWEEN CONTROL
AND REMOTE DEVICES
APARTMENTS
PEDESTAL
MOUNT BACKPLATE WITH
SECURITY BOLTS AND LOCKNUTS
USE CONCRETE
WEDGE ANCHORS
OR MOLLY ANCHORS
WALL MOUNTING
CABLE LENGTH FORMULA FOR EACH KEYPAD USED IN SYSTEM
CABLE RUN CABLE TYPE FORMULA
300 FEET MAXIMUM
BELDEN 9931 (24 AWG)
WEICO 9405 (20 AWG)
EACH AM-KP KEYPAD EQUALS 9 LOAD UNITS
FEET x LOAD UNITS < 3,000 MAXIMUM
FEET x LOAD UNITS < 10,000 MAXIMUM
HOMERUN WIRE
EACH KEYPAD
(1000 FEET WIRE MAXIMUM
ALLOWED IN SYSTEM)
500 FEET MAXIMUM
5. CONNECT CABLE 6. SET DEVICE ADDRESS 7. SECURE & LOCK CASE
8. PROGRAM SYSTEM 9. TEST KEYPAD LINEAR LIMITED WARRANTY
This Linear product is warranted against defects in material and workmanship for twelve
(12) months. The Warranty Expiration Date is labeled on the product.
This warranty
extends only to wholesale customers
who buy direct from Linear or through Linear’s
normal distribution channels.
Linear does not warrant this product to consumers.
Consumers should inquire from their selling dealer as to the nature of the dealer’s
warranty, if any.
There are no obligations or liabilities on the part of Linear
corporation for consequential damages arising out of or in connection with use
or performance of this product or other indirect damages with respect to loss of
property, revenue, or profit, or cost of removal, installation, or reinstallation.
All
implied warranties, including implied warranties for merchantability and implied
warranties for fitness, are valid only until Warranty Expiration Date as labeled on the
product.
This Linear Corporation Warranty is in lieu of all other warranties express
or implied.
All products returned for warranty service require a Return Product Authorization
Number (RPA#). Contact Linear Technical Services at 1-800-421-1587 for an RPA#
and other important details.
Copyright © 2000 Linear Corporation 211560 D
FOR LOCAL POWER, DISCONNECT RED WIRE FROM "PWR" CONNECTION
ON AM-KP AND CONNECT EXTERNAL 12 VDC SUPPLY (+ TO PWR & - TO GND)
NOTE: AM/II MUST BE CONNECTED TO AM-KP "GND"
B
O
1
O
O
O
1
1
1
B
B
O
1
KEYPAD IN
PWR GND
DAT1
DAT0
DVAL
CLK
AM/II
AM-KP
GRN
BLK
WHT
BLU
ORG/YEL
RED
USE A SMALL SCREWDRIVER
TO SET THE DEVICE ADDRESS SWITCH
EACH REMOTE DEVICE
MUST BE SET TO A
UNIQUE NUMBER
FROM 1 TO 6
ARROW ON SLOT
POINTS TO NUMBER
HOOK KEYPAD
ONTO BACKPLATE
USE KEY TO
LOCK KEYPAD
P R O G R A M T H E A M /II
TO CO NFIGURE THE KEYPAD(S)
AND SET THE ENTRY CODES
REFER TO THE AM/II
PROGRAMM ING INSTRUCTIONS
FOR DETAILS
*
5
6
7
8
9
0
#
1
2
3
4
RED INDICATO R SHOULD
BE LIT
ENTER VALID CODE
RED INDICATO R SHOULD
TURN GREEN AND PROGRAMM ED
R E L A Y IN A M /II
S H O U L D A C T IV A T E
1.
2.
3.
YELLOW INDICATOR LIGHTS
W HEN KEYPAD IS LOCKED O U T
OR BUSY
Loading...