LG MusicFlow LAS851M, NP8340 (H3), NA9340 (H3) User Manual
ENGLISH | SIMPLE MANUAL
To view the instructions of advanced
features, visit http://www.lg.com and then
download Owner’s Manual.
Some of the content in this manual may
dier from your unit.
The actual product may dier from the
image.
Model : MUSICFLOW LAS851M
SMART Hi-Fi AUDIO
Wireless Multi-room Sound Bar
Printed in Indonesia
LAS651M.BUSALLK_SIM_ENG_6763.indd 1 2015-02-25 3:18:49
1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sucient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING: This product contains chemicals known
to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands
after handling.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
NOTICE: For safety marking information including
product identication and supply ratings, please
refer to the main label on the bottom or rear of the
apparatus.
CAUTION : Do not use high voltage products
around this product. (ex. Bug Zapper) This product
may malfunction due to electrical shock.
CAUTION : Only use the AC adapter supplied
with this device. Do not use a power supply from
another device or another manufacturer. Using
any other power cable or power supply may cause
damage to the device and void your warranty.
CAUTION concerning the Power Cord
Check the specication page of this owner’s
manual to be certain of the current requirements
of this device. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. The
Power Plug is the disconnecting device. In case of
an emergency, the Power Plug must remain readily
accessible.
LAS651M.BUSALLK_SIM_ENG_6763.indd 2 2015-02-25 3:18:52
Getting Started 3
Getting Started
1
This device is equipped with a portable battery or
accumulator.
Safe way to remove the battery from this
equipment: To remove the old battery, follow the
steps in reverse order from assembly. To prevent
contamination of the environment or possibly
bring threat to human and/or animal health,
the old battery or must be put in an appropriate
container at designated collection points. Do not
dispose of batteries together with other waste.
It is recommended that you use local or free
reimbursement systems batteries.
IMPORTANT SAFETY
INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as powersupply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
LAS651M.BUSALLK_SIM_ENG_6763.indd 3 2015-02-25 3:18:53
Getting Started4
Getting Started
1
FCC Compliance Statement
This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment o and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
yReorient or relocate the receiving antenna.
yIncrease the separation between the equipment
and receiver.
yConnect the equipment into an outlet on a
circuit dierent from that to which the receiver is
connected.
yConsult the dealer or an experienced radio/TV
technician for help.
CAUTION : Any changes or modications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.
FCC WARNING: This equipment may generate
or use radio frequency energy. changes or
modications to this equipment may cause harmful
interference unless the modications are expressly
approved in the instruction manual. The user could
lose the authority to operate this equipment if an
unauthorized change or modication is made.
FCC RF Radiation Exposure Statement : This
equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body. End users must follow the
specic operating instructions for satisfying RF
exposure compliance. This transmitter must not be
co-located or operating in conjunction with any
other antenna or transmitter.
FCC Radio Frequency Interference
Requirements
This device is restricted to indoor use due to its
operation in the 5.15 to 5.25 GHz frequency range.
FCC requires this product to be used indoors for
the frequency range 5.15 to 5.25 GHz to reduce the
potential for harmful interference to co-channel
Mobile Satellite systems. High power radars are
allocated as primary users of the 5.25 to 5.35 GHz
and 5.65 to 5.85 GHz bands. These radar stations
can cause interference with and/or damage this
device. This device cannot be co-located with any
other transmitter.
CAUTION: Regulations of the FCC and FAA prohibit
airborne operation of radio-frequency wireless
devices because their signals could interfere with
critical aircraft instruments.
Responsible Party :
LG Electronics USA, Inc. 1000 Sylvan Avenue
Englewood Clis, NJ 07632
TEL. : +1-800-243-0000
LAS651M.BUSALLK_SIM_ENG_6763.indd 4 2015-02-25 3:18:53
Table of Contents 5
1
2
3
4
5
6
1 Getting Started
2 Safety Information
6 Unpacking
6 – Additional Information for some
accessories
7 Front panel
7 Rear panel
8 Remote control
2 Connecting to your TV
9 Connecting to your TV
9 – 1. Optical connection
9 – 2. HDMI (ARC) connection
3 Using Multi-Room
10 Multi-Room Network Setup
10 – Step 1. Home Network Requirement
11 – Step 2. Installing “Music Flow Player”
App and Media Server
12 – Step 3. Initial Multi-Room Setup
14 – Step 4. Add Speakers (Optional)
15 – Using the Bridge
16 Enjoying Multiple MUSICflow Product
16 – 1. Home Cinema Mode (Surround
Sound Mode)
16 – 2. Grouping Mode
16 – 3. L/R Stereo Mode
4 Using External device
17 Using External device
17 – 1. HDMI Input connection
17 – 2. PORTABLE IN connection
17 – 3. BLUETOOTH® connection
5 Troubleshooting
18 Troubleshooting
6 Appendix
22 Mounting the main unit on a wall
23 About Status LED’s Condition
23 Specification
23 Open source software notice
Table of Contents
Some of the content in this manual may dier from Music Flow Player app depending on the
application’s version.
LAS651M.BUSALLK_SIM_ENG_6763.indd 5 2015-02-25 3:18:53
Getting Started6
Getting Started
1
Unpacking
yWhen mounting this unit on a wall, refer to page 22.
yDepending on the region, the supplied accessories may dier.
Wireless subwoofer connection
1. Connect the power cord of the main unit
and the wireless subwoofer to the outlet.
2. Turn them on and the wireless subwoofer
will be automatically connected. When
the connection is completed, you can see
the green LED on the subwoofer.
If you have trouble to connect the wireless
subwoofer, refer to page 18.
Cable ties
Simple Manual
Optical cable
LAN cable
Wall bracket install
guide
Remote Control and
Batteries
Wall brackets and
screws
Subwoofer
Unit
Additional Information for some accessories
Adapter and power cord
LG Tag On Sticker
Subwoofer
Adapter and
power cord
1. Connect the supplied AC power
cord to the AC adapter.
2. Connect the AC adapter cable to
DC. IN adapter input.
3. Plug the AC power cord into an AC
outlet.
LAS651M.BUSALLK_SIM_ENG_6763.indd 6 2015-02-25 3:19:06
Getting Started 7
Getting Started
1
A
Display window
B
Remote sensor
C
LED indicator: Shows connection status.
(Page 23)
yWhite (blinking): waiting for network
connection
yWhite (staying on): network connection is
completed.
yWhite (Dimmed): standby mode with
network connection.
yGreen (staying on): the rst group was set.
yRed (staying on): standby mode without
network connection
D
(Add): Adds additional MUSICflow
products to your network.
(In case one or more MUSICflow products are
connected)
E
(Wi-Fi): Connects initial MUSICflow
product to your network wirelessly.
F
F (Function): Selects the function and input
source. (WI-FI / OPTICAL / BLUETOOTH /
HDMI IN / PORTABLE)
G p/o
(Volume)
H 1/!
(Standby/On)
Front panel
A
DC IN (Adapter input)
B
HDMI OUT (TV ARC) connector:
Connect to HDMI IN (ARC) on TV.
C
HDMI IN connectors:
Connect to HDMI OUT on the external device.
D
ETHERNET (LAN) port
E
PORTABLE IN connector
F
OPT. IN connector
Rear panel
LAS651M.BUSALLK_SIM_ENG_6763.indd 7 2015-02-25 3:19:08
Getting Started8
Getting Started
1
Remote control
• • • • • • • • • • a • • • • • • • • •
1
(Power) : Switches the unit ON or OFF (standby
mode).
FUNC (Function) : Selects the function and the
input source. (WI-FI / OPTICAL / BLUETOOTH /
HDMI IN / PORTABLE)
(Mute) : Mutes the sound.
OPTICAL : Changes input source to OPTICAL
directly.
SOUND EFFECT : Selects a sound eect mode.
WOOFER LEVEL : Sets the sound level of woofer.
o/p
(VOL) : Adjusts speaker volume.
• • • • • • • • • • b • • • • • • • • •
REPEAT : Listen to your music repeatedly.
C/V
(Skip) : Skips Fast backward or Forward.
dM
(Play/Pause) : Starts playback or pauses
playback.
(Shue) : Shues the music on the list.
You can use these playback buttons after
play music by “Music Flow Player” App or PC
software.
,
Note
• • • • • • • • • • c • • • • • • • • •
DRC : Turns on or o DRC function.
yDRC (Dynamic Range Control) : Make the sound
clear when the volume is turned down (Dolby
Digital only).
INFO : Displays the input source information.
AV SYNC : Synchronizes the audio and video.
yWhen receiving audio signals from TV, sound
and images may not be matched. In the case,
this function can adjust the delay time.
y Press AV SYNC then Use
C/V
to control
the time which you can set at between 0 and
300 ms.
SLEEP : Sets the system to turn o automatically at
a specied time.
AUTO VOL : Turns on or o the AUTO VOLUME
mode.
yWhen the output sound is too loud or too low,
press this button on the remote control. So you
can enjoy the sound with appropriate levels.
AUTO POWER : Turns on or o AUTO POWER
function.
yIf your TV or an external device is connected to
Optical Input connector(s) on the unit and when
you turn on your TV or an external device, this
unit recognizes the input signal and selects the
optical function. You can hear the sound from
your device.
LAS651M.BUSALLK_SIM_ENG_6763.indd 8 2015-02-25 3:19:09
Loading...