LG HBS-850 User Manual

HBS-850 User Manual

Bluetooth® Stereo Headset

Rev 1.0 US

WARNING:

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Wash hands after handling.

English Español

Table of Contents

Introduction 3

- Included in the Package 3

ENG

Description of Parts 4

- Headset 4

- Stabilizer Tip Replacement 5 How to Use 6

- Power On/Power Off 6

- Charging 6

- Low Battery 6

- Battery Status Alert 6

- Retractable Earbuds 6

- Pairing 7

- Advanced Multipoint 7

- Auto Reconnect 8

- Calling 9

• Answering a Call 9

• Transferring a Call 9

• Voice Dialing 9

• Last Number Redial 9

• Ending a Call 9

• Call Waiting 9

• Rejecting a Call 9

• Microphone Mute 9

- Volume Control 10

- Vibration Control 10

- Audio Streaming 10

- Equalizer 10

- aptX® 11

- Tone & TalkTM 11 Summary of Button Functions 13 LED Indicator 14 Troubleshooting 15

Specications 16

Precautions 17

Declaration of Conrmation 18

Additional Information 19

Limited Warranty 22

Important Safety Information 23

Introduction

The LG TONE ActiveTM (HBS-850) is a lightweight wireless headset that uses Bluetooth technology. This product can be used as an audio accessory for devices supporting either the A2DP or hands-free Bluetooth profile.

Included in the Package

Extra Ear Gels (1 Set - Small)

HBS-850

(Medium Ear Gels and Stabilizer Tips

installed)

Extra Stabilizer Tips

(1 Set - Small)

*USB Charging

Cable

*Actual product design may differ from images shown in this manual.

User Manual Warranty Card Quick Start Guide

ENG

Description of Parts

Headset

ENG

Volume Up Button/ Previous Song

Volume Down Button/ Next Song

Earbud (R) Earbud (L)

Charging Port

LED Indicator

Microphone

Stabilizer Tips

Power Button

MFB (Multi-Function Button)

Description of Parts

Stabilizer Tip Replacement

- An extra set of Stabilizer Tips is included. Depending on your neck size, you may want to change the size of the Stabilizer Tips for comfort and fit.

Stabilizer Tip Removal

Stabilizer Tip Installation

ENG

How to Use

Power On/Power Off

ENG

- Power On: Press and hold the PWR button for 2 seconds.

- Power Off: Press and hold the PWR button for 3 seconds.

Charging

- When the charger is connected (with the power on or off)

the headset will power off.

- While charging, the LED indicator will show a solid red light. When charged 80% or more, the indicator will show

a violet light.

- When the device is fully charged, the LED indicator will

show a solid blue light.

Low Battery

- A low battery alert will play once every 2 minutes.

- If the battery is not charged, the headset will power off.

Battery Status Alert

- Press and hold the Volume Down button for 3 seconds to

check the battery status of the headset.

Battery

Status

Voice

Prompt

Indicator

NOTE: When paired, some mobile devices may display

the headset's battery level at the top of the screen.

Retractable Earbuds

- Pull the earbuds to extend them to the desired length.

- To retract the earbuds, pull the cords out slightly, and they will automatically retract into place.

- If the earbuds do not retract, pull the earbuds out completely to retract them.

High Medium Low

Battery High

Blinking

LED

Blue

Battery Medium Blinking

Violet

Battery Low

Blinking

Red

Pairing

- To use the headset, you must first pair it with your mobile device. Once the devices have been paired, the headset will automatically reconnect.

1) Easy Pairing

a) Press and hold the PWR button for 2 seconds to

power on the headset.

b) If it is your first time pairing the device or it does not

detect a previously paired device, it will enter Pairing mode. The LED indicator will be solid blue.

c) On the device you wish to pair with, find the Bluetooth

menu and search for or add new devices. d) Select LG HBS850 from the list of devices. e) If asked for a Pass/Pin Code, enter 0000 (4 zeros). f) Once the devices are paired, you will hear “Your

headset paired.” NOTE: The headset will automatically power off if not paired within 3 minutes.

How to Use

2) Manual Pairing (pairing with another phone or re-pairing)

a) With the power off, press and hold the MFB and the

PWR button at the same time for 2 seconds to enter

Manual Pairing mode.

b) When the headset enters Pairing mode, the LED

indicator will show a solid blue light. Repeat Easy Pairing steps c through f.

Advanced Multipoint

The headset can be connected to two devices at the same time. This will give you the freedom to use call waiting between calls on both of your connected phones.

Pairing with Two Devices

- First, pair the headset with the Bluetooth-enabled mobile

device you want to use as your secondary device (see Pairing instructions).

- Once paired, power off the headset.

- With the power off, press and hold the MFB and the

PWR button at the same time for 2 seconds. This will

activate Manual Pairing mode.

- Pair and connect the headset with your other Bluetooth-

enabled mobile device. This will be your primary device.

ENG

How to Use

- Once the primary mobile device is paired and connected with the headset, reconnect the headset to the initially

ENG

paired mobile device.

NOTE: When the headset is connected to two mobile

devices at the same time (Multipoint), the headset calling functions will work with the primary mobile device.

NOTE: If the headset fails to connect to the primary phone through Easy Pairing, it will enter Pairing mode.

Calling Function

- Voice Dialing and Last Number Redial features work

with the primary mobile device (or the mobile device that made the last outgoing call).

Call Waiting

- While on a call, press and hold the MFB for 1 second to

answer an incoming call.

- To switch between two active calls, press and hold the MFB for 1 second.

- To end both calls, briefly press the MFB.

- If both paired mobile devices are receiving an incoming call, the headset will default to the primary device.

Auto Reconnect

- If in range of each other when the headset is powered on, the headset and the primary mobile device will automatically reconnect.

- The secondary mobile device will need to be manually connected. Select LG HBS850 from the list of devices in the

Bluetooth

menu and connect.

Out of Range

- If the paired devices are separated by a range of 33

feet (10 meters) or more, the headset and paired mobile device(s) will disconnect, and the headset will vibrate to alert you.

NOTE: To power off device vibration, press and hold the

Volume Up button for 3 seconds.

- If the headset and paired mobile device do not

automatically reconnect when they are back within the required range, briefly press the MFB on the headset to manually reconnect.

- When connected to multiple devices, the paired device

that is not in use will disconnect when out of range.

+ 17 hidden pages