LG HBS-750 User guide [ru]

www.lg.com
HBS-750 User Manual BLUETOOTH® Stereo Headset
ON
OFF
English
Рyccкий
Қазақша Українська
Rev 1.0 RU
HBS-750 User Manual BLUETOOTH® Stereo Headset
ON
OFF
to prevent any damage to, or misuse of the HBS-750, please read all of the information
carefully prior to using the HBS-750.
Any modications or changes to this manual due to
typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
English
All rights reserved.
LG Electronics Inc., 2014
Note: For the best performance and
Description of parts
ENG
REW Button FF Button
PLAY / PAUSE / STOP Button
Package Contents
VOLUME DOWN Button
CALL Button,
LED Indicator
Microphone
Memory Flex Neck Strap
Power Switch
Earphone (R)
Charging
Port
ON
OFF
VOLUME UP Button
Earphone (L)
Earbuds (2 Sets)
USB Charging Cable WEEE Card
User Manual
Specication
Bluetooth® specication Battery Standby time / Talk Time Up to 500Hrs / Up to 15Hrs Music play time Up to 10Hrs Charging time < 2.0Hrs Charging rated input DC 4.75 V ~ 5.6 V, 400mA Operation temperature -10°C ~ 60°C Dimension / weight 138.5(W) X 173.1mm(L) X 17.5mm(T) / 36g
2
Item Description
3.0 (Headset / Hands-Free / A2DP Proles) Battery 3.7V / 195mAh Li-Polymer
How to Use
Power On / Power Off
- Move the Power switch to the ‘ON’ or ‘OFF’ side.
Charging
- When the charger is connected, with the power on or off, the headset will turn off.
- While charging, the LED indicator will show a solid red light and change to violet when charged 80% and above.
- When charging is completed, the LED indicator will show a solid blue light.
Low Battery
- An announcement will be made once every 2 minutes.
- If the battery is not charged, the headset will turn off.
Battery Status Alert
- Press and hold the VOLUME DOWN button for 1 second.
- There are 3 levels of battery status
Battery status High Medium Low Voice Prompt Battery High Battery Medium Battery Low
LED display
- HBS-750 battery status indicator will appear on the iPhone screen.
Blinking
Blue LED
3 times
Blinking
Violet LED
3 times
Blinking
Red LED
3 times
ENG
3
How to Use
Pairing
ENG
- Before using the headset for the rst time, you must pair it with a Bluetooth-enabled
handset.
- To pair your headset with an additional handset, the headset must be placed in Pairing Mode.
- There are 2 Pairing Mode Methods with the HBS-750.
Easy Pairing (First Time Pairing)
1. Move the Power switch to the ‘ON’ side to turn on the HBS-750. When the headset
enters Pairing Mode, the LED indicator will show a solid blue light.
2. Using your handset, nd the Bluetooth Menu and “search for” or “add” new
devices.
• Select “LG HBS750” from the list of devices and pair it with your handset.
3. If asked for the Pass/PIN code please enter “0000” (4 Zeros).
* Note : If your handset supports Secure Simple Pairing (SSP), you will not need to
enter Pass/PIN code.
• Once pairing has completed successfully, you will hear “Your headset paired.”.
• The HBS-750 will automatically turn off if not paired within 3 minutes.
Manual Pairing (Pairing with another phone or re-pairing)
• With the power off, press the CALL button and move the Power switch to the ‘ON’ side at the same time for 2 seconds.
• When the headset enters Pairing Mode, the LED indicator will show a solid blue light. After the procedure repeat Easy Pairing steps 2 through 3.
4
How to Use
Multi-connection
Advanced Multipoint
The HBS-750 is capable of having two devices connected to the headset at the same time. This will give you the freedom of using call waiting between calls on both of your connected phones.
Connection
- Pair the headset with one of your Bluetooth-enabled handsets. (per the pairing instructions on page 2).
- Turn off the headset.
- With the power off, press the CALL button and move the Power switch to the ‘ON’ side at the same time for 2 seconds to enter Manual Pairing mode.
- Now, pair and connect the headset with your other Bluetooth-enabled handset. (this will be your primary handset).
- Once this handset is paired and connected, go back and connect the originally paired handset to the headset. This will now be your secondary handset.
* NOTE: When the HBS-750 is connected to two handsets at the same
time(Multipoint), the headset calling functions will work with the primary handset.
* NOTE: In case of failure to connect to the primary phone through Easy Pairing,
HBS-750 will enter pairing mode.
Calling Function
- Voice Dialing and Last Number Redial features work with the primary handset (or handset which made the last outgoing call).
Call Waiting
- While speaking on an active call, press the CALL button for 1 second to switch to an incoming call.
- To switch between 2 active calls, press the CALL button for 1 second.
- To terminate the active call or both calls at once, briey press the CALL button.
- If both handsets are receiving an incoming call, the headset will default to the primary device.
ENG
5
How to Use
Auto Reconnect
ENG
- If the HBS-750 is turned off (either accidentally or intentionally) while connected to a handset, the headset and handset will disconnect. The headset and handset will automatically reconnect when the HBS-750 is turned back on while in range.
- Secondary handset need to be connected via selecting “LG HBS750” from the list of devices at Bluetooth menu.
Out of range
- If the paired devices are separated by a range of 10 meters(33 feet) or more, the headset and handset will disconnect and HBS-750 will vibrate to alert.
* If vibrate is set to off by pressing VOLUME UP button for 3 seconds, HBS-750
will not vibrate.
- If the headset and handset do not automatically reconnect when they are back within the required range, briey press the CALL button on the HBS-750 to reconnect manually.
* It is possible to use these functions only when your handset supports them. For
further information about using these features, please consult your handset’s user manual.
- While in multi-connection and streaming, the inactive paired device, which is out of range, will be disconnected. The HBS-750 will alert once with no attempt to reconnect.
Calling
Answering a call / Ending a call
- When there is an incoming call, the headset will ring and vibrate.
* If vibrate is set to off by pressing VOLUME UP button for 3 seconds, HBS-750
will not vibrate.
- Briey press the VOLUME DOWN button to stop vibration.
- Briey press the CALL button.
Transferring a call
- While on a call on your handset, press and hold VOLUME UP button for 3 seconds to transfer the audio either from headset to handset or from handset to headset.
6
How to Use
Voice dialing
- Briey press the CALL button to activate “Voice Command”. Note: If the handset does not support Voice Dialing, it is possible that performing this action will activate Last Number Redial.
Last number redial
- Press and hold the CALL button for 1second to activate “Last Number Redial”. The headset will beep, and call the last number dialed.
Call waiting
- Answer a second call without hanging up the rst call by pressing the CALL
button for 1 second (you will hear a beep). Press the CALL button for 1second to turn to the original call.
- Briey press the CALL button to terminate the active call or both calls at once. (subject to handset’s support)
Rejecting a Call
- Press the CALL button for 1second when the handset rings.
Mic Mute
- Press and hold the VOLUME UP and VOLUME DOWN buttons simultaneously for 1 second to mute/unmute the Mic during conversation.
Volume control
- Briey press the VOLUME button.
Audio streaming controls
- PLAY : Briey press the PLAY/PAUSE button.
- PAUSE : Briey press the PLAY/PAUSE button.
- STOP : Press and hold the PLAY/PAUSE button.
- NEXT SONG : Briey press the FF button.
- PREVIOUS SONG : Briey press the REW button.
- FAST FORWARD : Press and hold the FF button.
- REWIND : Press and hold the REW button.
ENG
7
How to Use
Equalizer
ENG
- While playing music, press and hold VOLUME UP and VOLUME DOWN buttons simultaneously for 1 second to switch between EQ’s (Bass Boost(Default) g Normal g Treble Boost).
- The bass coming from the speakers can vary as a result of the size of the Earbud that is being used.
®
aptX
- HBS-750 features aptX® technology that ensures audio content transmitted over Bluetooth is instant and crystal-clear.
- aptX® is automatically enabled as long as the source device supports it.
Vibrate Control
- To activate or deactivate the ‘Vibrate’ function, press and hold VOLUME UP button for 3
seconds. You will hear “Vibrate on” or “Vibrate off” when it is activated or deactivated.
- When HBS-750 is set to vibrate off, and HBS-750 will not vibrate when receiving ‘incoming call’ and being ‘out of range’.
- By powering the unit off and then powering the unit back on, the vibration functionality will be activated.
SMS Reader
The HBS-750 Bluetooth headset supports SMS reading on Android TM based devices. In Google Play™ Store search for the LG ‘BT Reader’ application and install on your device to use this function. * The 2D barcode shown below helps you download the LG
‘BT Reader’ application from Google Play™ Store. Google Play is a trademark of Google, Inc.
8
LED indication
Function HBS-750 Status Action
Power on The blue LED light ickers 4 times.
Power off
Pairing mode The blue LED light stays on.
Operating
Headset / hands-free prole connected
Call connected
Charging
Charging
Charging complete
The blue LED light ickers 4 times and then turns off.
The blue LED light ickers 2 times every 5 seconds.
The blue LED light ickers 2 times every 5 seconds.
The red LED stays on and changes to violet when charged 80% and above.
The blue LED stays on.
Troubleshooting
Issue Possible problem Resolution
Does not turn on
Unable to communicate with the LG Bluetooth®
Headset
HBS-750
Unable to pair the HBS-750 with the Bluetooth® device
Low sound (speaker)
Check whether the battery of the HBS-750 is fully charged.
Check whether the handset supports the headset or hands-free Bluetooth proles.
Check whether the battery of the HBS-750 is low.
Check and make sure the headset is on.
Check and make sure the headset is placed in pairing mode.
Charge the battery.
Determine whether your handset supports the headset or hands-free Bluetooth proles.
Charge the battery.
Slide the Power switch to the ‘ON’ side to turn on the headset.
With the power off, press the CALL button and move the Power switch to the ‘ON’ side at the same time for 1 second to manually place the headset in pairing mode.
Check the speaker volume. lncrease the volume level.
ENG
9
Precautions
Do not drop the unit from high places. Do not modify, repair, or take apart.
ENG
Do not expose directly to water, alcohol, benzene, etc. for cleaning. Do not expose directly to ammables. Do not place or keep the unit near ammables. Keep unit away from humidity & dust. Do not place heavy objects on the unit. Only use the headset with an original LG charger, otherwise it may be damaged.
• Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
• There is a risk of explosion if the battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
• The neck strap is made of a shape memory alloy. However, bending the neck strap
repeatedly is not recommended.
Declaration of Conrmation
FCC NOTICE TO USERS :
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may
cause undesired operation.
IMPORTANT NOTE :
To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.
CE NOTICE TO USERS :
Hereby, LG Electronics Inc. declares that this HBS-750 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
10
FCC ID: BEJHBS750
Additional Information
1. Radio frequency exposure
This Bluetooth® Headset, HBS-750, is a radio transmitter and receiver. When in operation, it communicates with a Bluetooth® equipped mobile device by receiving and transmitting radio frequency (RF) electromagnetic elds (microwaves) in the frequency range 2.4 to
2.4835 GHz. Your Bluetooth® Headset is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when used any compatible LG Electronics mobile phone.
2. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive atmosphere. It is rare, but your electronic device could generate sparks. Sparks in such areas could cause an explosion or re resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked.
3. Battery information
A rechargeable battery has a long service life if treated properly. A new battery or one that has not been used for a long period of time could have reduced capacity the rst few times it is used. Do not expose the battery to extreme temperatures, never above +60°(+140°F) or under -20°(-4°F). For maximum battery capacity, use the battery in room temperature. If the battery is used in low temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures between +10°(+50°F) and +45°(+113°F). For your safety, do not remove the battery incorperated in the product. If you need to replace the battery, take it to the nearest authorised LG Electronics service point or dealer for assistance.
4. Recycling the battery in your Bluetooth® Headset
The battery in your Bluetooth® Headset must be disposed of properly and should never be placed in municipal waste. The LG Electronics service partner removing battery will dispose of it according to local regulations.
Disposal of waste batteries/accumulators 1 This symbol may be combined with chemical symbols for mercury (Hg), cadmium
(Cd) or lead (Pb) if the battery contains more than 0.0005% of mercury, 0.002% of cadmium or 0.004% of lead.
2 All batteries/accumulators should be disposed separately from the municipal waste
stream via designated collection facilities appointed by the government or the local authorities.
3 The correct disposal of your old batteries/accumulators will help to prevent potential
negative consequences for the environment, animal and human health.
4 For more detailed information about disposal of your old batteries/accumulators,
please contact your city office, waste disposal service or the shop where you purchased the product.
ENG
11
Additional Information
5. Conditions
- The warranty is valid only if the original receipt issued to the original purchaser by the
ENG
dealer, specifying the date of purchase and serial number, is presented with the product to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the product from the dealer.
- If LG Electronics repairs or replaces the product, the repaired or replaced product
shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of LG Electronics.
- This Warranty does not cover any failure of the product due to normal wear and
tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with instructions for use and maintenance of the product. Nor does this warranty cover any failure of the product due to accident, modication or adjustment, acts of God or damage resulting from liquid.
- This warranty does not cover product failures due to improper repair installations,
modications or service performed by a non-LG Electronics authorized person. Tampering with any of the seals on the product will void the warranty.
Limited Warranty
SUBJECT TO THE CONDITIONS OF THIS LIMITED WARRANTY, LG ELECTRONICS WARRANTS THIS PRODUCT TO BE FREE FROM DEFECTS IN DESIGN, MATERIAL AND WORKMANSHIP AT THE TIME OF ITS ORIGINAL PURCHASE BY A CONSUMER, AND FOR A SUBSEQUENT PERIOD OF ONE (1) YEAR. SHOULD YOUR PRODUCT NEED WARRANTY SERVICE, PLEASE RETURN IT TO THE DEALER FROM WHOM IT WAS PURCHASED OR CONTACT YOUR LOCAL LG ELECTRONICS CONTACT CENTER TO GET FURTHER INFORMATION.
12
Important safety information
Avoiding hearing damage
Permanent hearing loss may occur if you use your Handsfree car kit at a high volume. Set the volume to a safe level. You can adapt over time to a higher volume of sound that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or mufed speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected. Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use Headset at high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking near you. Please refer to your handset user guide for more information on how to adjust listening levels on your handset.
Using Headset safely
Use of Headset to listen to music while operating a vehicle is not recommended and is illegal in some areas. Be careful and attentive while driving. Stop using this device if you nd it disruptive or distracting while operating any type of vehicle or performing any other activity that requires your full attention.
ENG
13
MEMO
Русский
HBS-750 Руководство пользователя
Стереогарнитура BLUETOOTH
ON
OFF
Примечание. Для максимально эффективного
использования и предотвращения любых
повреждений или неправильного использования
стереогарнитуры HBS-750 внимательно
прочитайте всю информацию по использованию
типографских ошибок или неточной информации
в данном руководстве могут быть внесены только
Любые изменения и исправления
®
Все права защищены.
LG Electronics Inc., 2014
LG Electronics Inc.
HBS-750.
Описание деталей
Кнопка УМЕНЬШЕНИЯ ГРОМКОСТИ
РУС
Кнопка ПЕРЕМОТКИ НАЗАД Кнопка ПЕРЕМОТКИ ВПЕРЕД
Кнопка ВОСПРОИЗВЕДЕНИЯ / ПАУЗЫ / ОСТАНОВКИ
Кнопка ВЫЗОВА
Светодиодный индикатор
Наушник (ПРАВЫЙ)
Комплектация упаковки
Микрофон
Гибкий шейный ремешок с памятью формы
Кнопка питания
Разъем для
подключения
зарядного устройства
ON
OFF
Кнопка УВЕЛИЧЕНИЯ ГРОМКОСТИ
Наушник (ЛЕВЫЙ)
Амбушюры (2 набора)
Зарядный кабель USB Карта WEEE
Технические характеристики
Элемент Описание
Технические характеристики
®
Bluetooth Аккумулятор Режим ожидания / Режим разговора Время воспроизведения музыки До 10 часов Время зарядки < 2,0 часов Номинальное потребление при зарядке Рабочий диапазон температур -10 °C ~ 60 °C Размер / вес 138,5 мм (Ш) х 173,1 мм (Д) х 17,5 мм (В) / 36 г
2
Руководство
пользователя
V3.0 (профили: Наушники / Гарнитура / A2DP) Аккумулятор 3,7 В / 195 мАч, литий-полимерный
До 500 ч / До 15 ч
4,75 В ~ 5,6 В постоянного тока, 400 мА
(только для Европы)
Loading...
+ 40 hidden pages