LG Electronics HBS-730 User Manual
HBS-730 User Manual
BLUETOOTH® Stereo Headset
Note: Please read all information carefully prior to
using HBS-730 in order to prevent damages to the
product and to enjoy the best performance.
This product contains chemicals known to the State
of California to cause cancer and birth defects or
English
Español
All rights reserved.
LG Electronics Inc., 2012
reproductive harm.
Wash hands after handling.
Rev 1.0 US
WARNING :
ENG
2
Table of Contents
Introduction 3
- Included in the package 3
Description of Parts 4
How to Use 4
- Wearing 4
- Charging 5
- Low Battery 5
- Battery Status Alert 5
- Power On / Power Off 5
- Pairing 5
- Multi-connection 6
- Auto Reconnect 7
- Audio Streaming 7
- Equalizer 8
- aptX® 8
- Volume Control 8
- Calling 8
• Answering a call 8
• Transferring a call 8
• Voice dialing 9
• Last number redial 9
• Ending a call 9
• Call waiting 9
• Rejecting a call 9
• Mic mute 9
- SMS reader 9
Summary of Button Functions 10
LED Indication 11
Troubleshooting 11
Specification 12
Precautions 12
Declaration of Confirmation 13
Additional Information 13
Limited Warranty 16
Important Safety Information 16
Introduction
The LG TONE+TM (HBS-730) is a light weight wireless headset that uses Bluetooth®
technology.
This product can be used as an audio accessory for devices supporting either the
A2DP or Hands-Free Bluetooth Prole.
Included in the Package
ENG
HBS-730
User Manual Warranty Card Quick Start Guide
Earbuds (2 Sets) Charger
3
Description of Parts
Headset
ENG
Memory Flex Neck
Strap
REW Button
FF Button
PLAY / PAUSE /
STOP Button
Earphone (R)
How to Use
Wearing
4
Charging Port
Power Switch
VOLUME UP Button
VOLUME DOWN Button
CALL Button,
LED Indicator
Microphone
Earphone (L)
How to Use
Charging
- When the charger is connected, with the power on or off, the headset will turn off.
- While charging, the LED indicator will show a solid red light.
- When charging is complete, the LED indicator will turn off.
Low Battery
- A low battery alert will play once every 2 minutes.
- If the battery is not charged, the headset will turn off.
Battery Status Alert
- By pressing and holding the VOLUME DOWN button for 1 second, you can check
the battery status of the HBS-730 while in standby mode or playing music. The
audible battery status alert will inform you of the battery level. There are 3 levels of
battery power:
1. Battery High
2. Battery Medium
3. Battery Low
- HBS-730 battery status indicator will appear on the iPhone screen.
Power On / Power Off
- Slide the power switch to the ‘ON’ or ‘OFF’ position.
Pairing
- Before using the headset for the rst time, you must pair it with a Bluetooth-enabled
device.
- There are 2 pairing mode methods with the HBS-730.
1) Easy Pairing
a) Slide the power switch to the “ON” position.
b) If it is your rst time pairing the device it will automatically enter pairing mode.
If it has been paired but no paired device is in range it will enter pairing mode
after 10 seconds.
ENG
5
How to Use
• The LED indicator will be solid blue.
c) On the device you wish to pair, nd the Bluetooth menu and “search for” or
ENG
“add” new devices.
d) Select “LG HBS-730” from the list of devices.
e) If asked for a Pass/Pin Code enter 0000 (4 Zeros).
f) Once the devices are paired, you will hear “headset paired”.
• The HBS-730 will automatically turn off if not paired within 3 minutes.
2) Manual Pairing (pairing with another phone or re-pairing)
a) With the power off, press the CALL button and slide the power switch to the
‘ON’ position at the same time for 1 second.
b) When the headset enters Pairing Mode, the LED indicator will show a solid
blue light. After the procedure repeat Easy Pairing steps c) through “f”.
Multi-connection
Advanced Multipoint
The HBS-730 is capable of having two devices connected to the headset at the
same time. This will give you the freedom of using call waiting between calls on
both of your connected phones.
Connection
- Pair the headset with one of your Bluetooth-enabled handsets. (per the pairing
instructions on page 6).
- Turn off the headset.
- With the power off, press the CALL button and slide the power switch to the ‘ON’
position at the same time for 2 seconds to enter Manual Pairing mode.
- Now, pair and connect the headset with your other Bluetooth-enabled handset.
(this will be your primary handset).
- Once this handset is paired and connected, go back and connect the originally
paired handset to the headset. This will now be your secondary handset.
* NOTE: When the HBS-730 is connected to two handsets at the same
time(Multipoint), the headset calling functions will work with the primary handset.
* NOTE: In case of failure to connect to the primary phone through Easy Pairing,
HBS-730 will enter pairing mode.
6
Loading...