LG HBS700 User Manual

Any modifi cations or changes to this manual due to typographical errors or inaccuracies of stated
information shall only be made by LG Electronics Inc
www.lg.com
HBS-700 User Manual BLUETOOTH® Stereo Headset
using HBS-700 in order to prevent damages to the
product and to enjoy the best performance.
English
Español
All rights reserved.
LG Electronics Inc., 2011
Rev 2.0 US
Table of Contents
ENG
Introduction 3
- Included in the package 3 Description of parts 4 How to use 4
- Wearing 4
- Charging 5
- Low battery 5
- Battery status check 5
- Power on / Power off 5
- Pairing 5
- Multi-connection 6
- Auto reconnect 7
- Audio streaming 7
-Bass Boost 8
- Volume control 8
- Calling 8
• Answering a call 8
• Transferring a call 8
• Voice dialing 8
• Last number redial 9
• Ending a call 9
• Call waiting 9
• Rejecting a call 9
- SMS reader 9 Summary of button functions 10 LED indication 11 Troubleshooting 11 Specification 12 Precautions 12 Declaration of confirmation 13 Additional information 13 Limited warranty 16 Important safety information 16
2 3
The LG Tone (HBS-700) is a light weight wireless headset that uses Bluetooth® technology. This product can be used as an audio accessory for devices supporting either the A2DP or Hands-Free Bluetooth® Profi le.
Included in the package
HBS-700
Charger User manual Warranty Card
Introduction
Charger
ENG
Description of parts How to use
ENG
Memory fl ex neck strap
REW Button FF Button
PLAY / PAUSE / STOP Button
Earphone (R)
Headset
Charging port
Power Switch
VOLUME UP Button
VOLUME DOWN Button
CALL Button, LED indicator
Microphone
Earphone (L)
Charging
- When the charger is connected, with the power on or off, the headset will turn off.
- While charging, the LED indicator will show a solid red light.
- When charging is complete, the LED indicator will turn off.
Low battery
- A low battery tone will play once every 30 seconds.
- If the battery is not charged, the headset will turn off.
Battery status check
- Press and hold the VOLUME DOWN button for 3 seconds.
- There are 3 levels of battery status.
Battery status High Medium Low
LED display
Solid blue for 1 second Solid violet for 1 second Solid red for 1 second
ENG
How to use
Wearing
Power on / Power off
- Move the power switch to the ‘ON’ or ‘OFF’ position.
Pairing
- Before using the headset for the fi rst time, you must pair it with a Bluetooth-enabled Device.
- There are 2 Pairing Mode Methods with the HBS-700.
1) Easy Pairing
a) Move the Power Switch to the “ON” position. b) If it is your fi rst time paring the device it will automatically enter pairing mode.
If it has been paired but no paired device is in range it will enter Pairing mode
4 5
after 10 seconds.
How to use
ENG
“add” new devices d) Select “LG HBS-700” From the list of devices e) If asked for a Pass/Pin Code enter 0000 (4 Zero’s) f) Once pairing is complete you will hear a beep
• The HBS-700 will automatically turn off if not paired within 3 minutes.
2) Manual Pairing (Pairing with another phone or re-pairing)
a) With the Power off, press the CALL button and move the power switch to the
‘ON’ position at the same time for 4 seconds. b) When the headset enters Pairing Mode, the LED indicator will show a solid
blue light. After the procedure repeat Easy Pairing steps c through f.
Multi-connection
- In Multi-Connection mode, only one device can be used to make/receive calls, and the other connected device can only be used for streaming Audio.
- To enter Multi-Connection mode:
1. Connect your HBS-700 to the device you wish to use for making calls.
2. Power off the HBS-700
3. Place your HBS-700 into pairing mode and pair/connect to a Bluetooth Stereo
enabled audio device (not your handset). (This Bluetooth Stereo enabled audio device must only support the A2DP/AVRCP profi les, not the headset/hands- free profi les)
4. Once the Bluetooth Stereo enabled device is paired and connected, press the
CALL button once briefl y on the HBS-700 to reconnect with the handset (only the headset/hands-free profi le will connect).
5. The handset is now paired with the headset/hands-free profi le of the HBS-700.
The Bluetooth Stereo enabled audio device is paired with A2DP/AVRCP stereo profi les.
6 7
• The LED indicator will be Solid Blue
c) On the device you wish to pair, fi nd the bluetooth menu and “serch for” or
* NOTE: In order to access Multi-Connection mode, at least one of the two
devices you are trying to connect to the HBS-700 must be able to select a profi le, OR one of the two devices must only support one profi le (Either Headset/Hands-Free or A2DP/AVRCP). For example: Two handsets which support both the Headset/Hands-Free and A2DP/AVRCP profi les cannot be connected to the HBS-700 simultaneously. But, one handset supporting Headset/Hands-Free/A2DP/AVRCP and a Bluetooth Stereo Dongle supporting only A2DP/AVRCP is OK.
Auto reconnect
- If the HBS-700 is turned off (either accidentally or intentionally) while connected to a handset, the headset and handset will disconnect. The headset and handset will automatically reconnect when the HBS-700 is turned back on while in range.
Out of range
- If the paired Devices are separated by a range of 33 feet (10 meters) or more, the headset and handset will disconnect.
- If the headset and handset do not automatically reconnect when they are back within the required range, briefl y press the CALL button on the HBS-700 to reconnect manually.
Audio streaming
Play
- Briefl y press the PLAY/PAUSE/STOP Button.
Pause
- While playing music, briefl y press the PLAY/PAUSE/STOP button.
Stop
- While playing music, press and hold the PLAY/PAUSE/STOP button for 1 second.
Next Song
- Briefl y press the FF button.
Previous song
- Briefl y press the REW button.
How to use
ENG
How to use
Fast forward
- Press and hold the FF button.
ENG
Rewind
- Press and hold the REW button.
Bass Boost
- While playing music, press and hold VOLUME UP and VOLUME DOWN buttons simultaneously for 1 second to switch between EQ’s (Normal or Bass Boost). The headset will beep.
Volume control
- Press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume.
- There are eight levels of speaker volume in hands-free mode.
- There are sixteen levels of speaker volume in audio streaming mode.
Calling
Answering a call
- When there is an incoming call, the headset will ring.
- Briefl y press the CALL button to answer the incoming call.
Transferring a call
- If you make a call from the handset, the call will (depending on the phone settings) automatically transfer to the headset. If the call is not automatically transferred, you can manually transfer the call to, or from, the headset by pressing and holding VOLUME UP button for 3 seconds on the HBS-700 (handset and headset must be paired).
Voice dialing
- Briefl y press the CALL button to activate “Voice Command”. For best results, record the Voice dialing tag through your headset. NOTE: If your handset does not support Voice dialing, this action may activate
8 9
Last Number Redial.
Last number redial
- Press and hold the CALL button for 1 second to activate “Last number redial”. The headset will beep and then call the last number dialled.
Ending a call
- Briefl y press the CALL button.
Call waiting
- Answer a second call without hanging up the fi rst call by pressing the CALL button for 1second. Press the CALL button for 1second to return to the original call.
- Briefl y press the CALL button to terminate both calls at once.
Rejecting a call
- Activate call reject by pressing the CALL button for 1 second when the handset rings.
* These functions may only be used if your handset supports them. For further
information about using these features, please consult your handset’s user manual.
SMS reader
The HBS-700 Bluetooth Headset supports SMS reading on Android TM based devices. In the AndroidTM Marketplace search for the LG ‘BT Reader’ application and install on your device to use this function. * The 2D barcode shown below helps you download the ‘BT Reader’ application
from Android MarketTM.
How to use
ENG
Summary of button functions
ENG
Function
Power on Power off Move the power switch to the ‘ON’ side. Power off Power on Move the power switch to the ‘OFF’ side. Volume up Talking Briefl y press the VOLUME UP button. Volume down Talking Briefl y press the VOLUME DOWN button.
Transferring a call Talking
Answering a call Ringing Briefl y press the CALL button. Ending a call Talking Briefl y press the CALL button. Call waiting Talking Press the CALL button for 1 second. Last number redial Idle Press the CALL button for 1 second. Voice dialing
(handset must support)
Call reject Ringing Press the CALL button for 1 second.
Pairing mode (Manual)
Battery status check Play Power on Briefl y press the PLAY/PAUSE/STOP button. Pause Music on Briefl y press the PLAY/PAUSE/STOP button.
Stop Music on
Next song Music on Brie y press the FF button. Previous song Music on Brie y press the REW button. Fast forward Music on Press and hold the FF button. Rewind Music on Press and hold the REW button.
Bass Boost Music on
10 11
HBS-700 Status
Press and hold VOLUME UP button for 3 seconds.
Idle Briefl y press the CALL button.
Power off
Idle Press the VOLUME DOWN button for 3 seconds.
Press the CALL button and move the power switch to the ‘ON’ side at the same time for 4 seconds.
Press and hold the PLAY/PAUSE/STOP button for 1 second.
Press and hold VOLUME UP and VOLUME DOWN buttons simultaneously for 1 second.
Action
Function HBS-700 Status Action
Power on The blue LED light fl ickers 4 times.
Power off
Pairing mode The blue LED light stays on.
Operating
Headset / hands-free profi le connected
Call connected
Charging The blue LED stays on.
Charging
Charging complete
Issue Possible problem Resolution
Does not turn on
Unable to communicate with the LG Bluetooth Headset HBS-700
Unable to pair the HBS-700 with the Bluetooth
Low sound (speaker) Check the speaker volume. lncrease the volume level.
®
device
®
The blue LED light fl ickers 4 times and then turns off.
The blue LED light fl ickers 2 times every 5 seconds.
The blue LED light fl ickers 2 times every 5 seconds.
LED turns off.
Check whether the battery of the HBS-700 is fully charged.
Check whether the handset supports the headset or hands-free Bluetooth profi les.
Check whether the battery of the HBS-700 is low.
Check and make sure the headset is on.
Check and make sure the headset is placed in pairing mode.
LED indication
Troubleshooting
Charge the battery.
Determine whether your handset supports the headset or hands­free Bluetooth profi les.
Charge the battery.
Move the power switch to the ‘ON’ side to turn on the headset.
With the Power off, press the CALL button and move the power switch to the ‘ON’ side at the same time for 4 seconds to manually place the headset in pairing mode.
ENG
Loading...
+ 12 hidden pages