LG HBS600 User Manual

English

Español

HBS-600 User Manual

BLUETOOTH® Stereo Headset

Rev 1.0 US

Note: Please read all information carefully prior to using HBS-600 in order to prevent damages to the product and to enjoy the best performance.

WARNING :

This product contains chemicals known to the State of California to cause cancer and birth defects or reproductive harm.

Wash hands after handling.

ENG

Table of Contents

Introduction	3
- Included in the package	3
Description of Parts	4
How to Use	4
- Charging	4
- Low Battery	4
- Battery Status Alert	5
- Power On / Power Off	5
- Pairing	5
- Multi-connection	6
- Auto Reconnect	7
- Audio Streaming Controls	7
- Equalizer	8
- aptX®	8
- Volume Control	8
- Calling	8
• Answering a call	8
• Transferring a call	8
• Voice dialing	8
• Last number redial	8
• Ending a call	8
• Call waiting	9
• Rejecting a call	9
• Mic mute	9
• Passive Mode	9
- SMS reader	9
Summary of Button Functions	10
LED Indicator	11
Troubleshooting	11
Specification	12
Precautions	12
Declaration of Confirmation	13
Additional Information	13
Limited Warranty	16
Important Safety Information	16

Introduction

The HBS-600 is a light weight wireless headset that uses Bluetooth® technology. This product can be used as an audio accessory for devices supporting either the A2DP or Hands-Free Bluetooth Profile.

ENG

Included in the Package

HBS-600

3.5phi Cable

Charger

User Manual

Warranty Card

Quick Start Guide

ENG

Description of Parts

Headset

REWIND Button

LED Indicator

PLAY / PAUSE / STOP

Button

	VOLUME DOWN Button
FAST FORWARD	VOLUME UP Button
FAST FORWARD
Button
		Charging
		Port
Speaker (L)		AUX
Power Switch
Microphone	CALL Button	Speaker (R)

How to Use

Charging

-When the charger is connected, with the power switched on or off, the headset will turn off.

-While charging, the LED indicator will show a solid red light.

-When charging is complete, the LED indicator will turn off.

Low Battery

-A low battery alert will play once every 2 minutes.

-If the battery is not charged, the headset will turn off.

			How to Use
	Battery Status Alert


	- Press and hold the VOLUME DOWN button for 1 second to check the battery status			ENG
	of the HBS-600. The audible battery status alert will inform you of the battery level.
	There are 3 levels of battery power:
1.		Battery High
2.		Battery Medium
3.		Battery Low

- HBS-600 battery status indicator will appear on the iPhone screen.

Power On / Power Off

- Slide the power switch to the ‘ON’ or ‘OFF’ position.

Pairing

-Before using the headset for the first time, you must pair it with a Bluetooth-enabled device.

-There are 2 pairing mode methods with the HBS-600.

1)Easy Pairing

a)Slide the power switch to the “ON” position.

b)If it is your first time pairing the device it will automatically enter pairing mode.

If it has been paired but no paired device is in range it will enter pairing mode after 10 seconds.

• The LED indicator will be solid blue.

c)On the device you wish to pair, find the Bluetooth menu and search for new devices.

d)Select HBS-600 from the list of devices.

e)If asked for a Password/Pin Code enter 0000 (4 Zeros).

f)Once the devices are paired, you will hear “Headset paired”.

•The HBS-600 will automatically turn off if not paired within 3 minutes.

2)Manual Pairing (pairing with another phone or re-pairing)

a)With the power off, press the PLAY/PAUSE/STOP button and slide the power switch to the ‘ON’ position. Hold the CALL button for about 2 seconds.

+ 11 hidden pages