HBS-500 User Manual
BLUETOOTH® Stereo Headset
Note: Please read all information carefully prior to
using the HBS-500 in order to prevent damages to
the product and to enjoy the best performance.
This product contains chemicals known to the State
of California to cause cancer and birth defects or
English
Español
All rights reserved.
LG Electronics Inc., 2015
reproductive harm.
Wash hands after handling.
Rev 1.0 US
WARNING :
ENG
2
Table of Contents
Introduction 3
- Included in the Package 3
Description of Parts 4
How to Use 5
- Power On / Power Off 5
- Charging 5
- Low Battery 5
- Battery Status Alert 5
- Pairing 5
- Multi-connection 6
- Auto Reconnect 7
- Calling 7
• Answering a Call 7
• Transferring a Call 7
• Voice Dialing 8
• Last number Redial 8
• Ending a Call 8
• Call Waiting 8
• Rejecting a Call 8
• Mic Mute 8
- Volume Control 8
- Vibrate Control 8
- Audio Streaming 9
- Equalizer 9
- Tone & TalkTM 9
Summary of HBS-500 Functions 10
LED (or Vibrate) Indicator 11
Troubleshooting 11
Specifications 12
Precautions 12
Declaration of Confirmation 13
Additional Information 13
Limited Warranty 16
Important Safety Information 16
Introduction
The LG TONE+ (HBS-500) is a lightweight wireless headset that uses Bluetooth
technology.
This product can be used as an audio accessory for devices supporting either the
A2DP or Hands-Free Bluetooth Prole.
Included in the Package
ENG
HBS-500
Ear Gels (2 Sets) *USB Charging Cable
User Manual Warranty Card
* Actual product design may differ from images shown in manual.
3
Description of Parts
Headset
ENG
Memory Flex Neck Strap
VOLUME UP Button
VOLUME DOWN Button
(REW, Previous Song)
4
(FF, Next Song)
Earbud (R)
Charging Port
LED Indicator
MFB (Multi-Function Button) :
Power/Call/Play Button
Microphone
Earbud (L)
How to Use
Power On / Power Off
- Power On : Press and hold the MFB for 2 seconds.
- Power Off : Press and hold the MFB for 3 seconds.
Charging
- When the charger is connected (with the power on or off) the headset will turn off.
-
While charging, the LED indicator will show a solid red light and then
change to violet when charged 80% and above.
- When charging is completed, the LED indicator will show a solid blue light.
Low Battery
- A low battery alert will play once every 2 minutes.
- If the battery is not charged, the headset will turn off.
Battery Status Alert
- By pressing and holding the VOLUME DOWN button for 1 second, you can check
the battery status of the HBS-500.
Battery Status High Medium Low
Voice Prompt Battery High Battery Medium Battery Low
LED Indicator
Pairing
- Before using, HBS-500 must be paired/connected with a Bluetooth-enabled device.
1) Easy Pairing
a) Press and hold the MFB for 2 seconds to turn on the HBS-500.
b) If it is your rst time pairing the device it will automatically enter pairing mode. If
it has been paired but no paired device is in range it will enter pairing mode.
• The LED indicator will be solid blue.
Blinking
Blue
Blinking
Violet
Blinking
Red
ENG
5
How to Use
c) On the device you wish to pair, nd the Bluetooth menu and search for or add
ENG
new devices.
d) Select LG HBS500 from the list of devices.
e) If asked for a Pass/Pin Code enter 0000 (4 Zeros).
f) Once the devices are paired, you will hear “Your headset paired.”
• The HBS-500 will automatically turn off if not paired within 3 minutes.
2) Manual Pairing (pairing with another phone or re-pairing)
a) With the power off, press the VOLUME DOWN button and press and hold the
MFB for 2 seconds to enter Manual Pairing mode.
b) When the headset enters Pairing Mode, the LED indicator will show a solid
blue light. After the procedure repeat Easy Pairing steps c through f.
Multi-connection
Advanced Multipoint
The HBS-500 is capable of having two devices connected to the headset at the
same time. This will give you the freedom of using call waiting between calls on
both of your connected phones.
Connection
- Pair the headset with one of your Bluetooth-enabled handsets (see the pairing
instructions on pages 5 and 6).
- Turn off the headset.
- Power up as manual pairing mode. (With the power off, press the VOLUME
DOWN button and press and hold the MFB for 2 seconds.)
- Pair and connect the headset with your other Bluetooth-enabled handset. This
will be your primary headset.
- Once the handset is paired and connected, connect the originally paired handset
to the headset. This will now be your secondary handset.
* NOTE: When the HBS-500 is connected to two handsets at the same time
(Multipoint), the headset calling functions will work with the primary handset.
* NOTE: In case of failure to connect to the primary phone through Easy Pairing,
HBS-500 will enter Pairing Mode.
6