All rights reserved.
LG Electronics Inc., 2010
Note : For the best performance and
to prevent any damage to, or misuse of the
HBM-905, please read all of the information
carefully prior to using the HBM-905.
Any modifications or changes to this manual due to
typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
LG Electronics
BLUETOOTH®Mono Headset
HBM-905 User manual
English
3
Introduction
The LG Bluetooth®Headset HBM- 905 is a lightweight wireless
Headset utilizing Bluetooth®technology. This product can be used
as an audio accessory for devices supporting either the Headset
or Handsfree Bluetooth®Profiles.
LG HBM-905
Bluetooth
®
Headset
User manual
Warranty Card
Included in package
2
Table of Contents
Introduction 3
- Included in Package 3
Part Description 4
How to use 4
- Change direction 4
- Charging 5
- Low battery 5
- Power on 5
- Power off 5
- Pairing 5
•Easy Pairing 6
•Manual Pairing 6
- Battery Status Alert 6
- Auto Reconnect 7
- Volume control 7
- Calling 8
•Answering a call 8
•Making a call 8
•Voice dialing 8
•Last number redial 8
•Ending a call 8
•Transferring a call 8
•Call waiting 8
•Call Reject 9
- Multipoint 9
•Multipoint Connect 9
•Calling Functions (While in Multipoint) 9
- Voice Prompt/Caller ID 9
Summary of button functions
10
LED indication 10
Troubleshooting 11
Specification 11
Precautions 12
Declaration of confirmation 13
Additional information 13
Limited warranty 16
Important safety information 16
Ear-loops (2)
Ear rubber (2)
4 5
Part Description
Charging
Low battery
Power on
Power off
- Remove the cover on the charging port and connect the charger.
- When the charger is connected, with power on or off, the Headset will
turn off.
- While charging, the LED indicator will show a solid white light.
- The buttons will not function while the device is charging.
- It takes 2 hours to fully charge the Headset.
- When charging is complete, the LED indicator will turn off.
- Move the PWR switch from ON position to OFF position.
•A shutdown tone will play, the Bluetooth link will disconnect, and the
power will turn off.
Front
How to use
Change direction
- A low battery announcement will be made once every 30 seconds.
(Speech : Battery Low)
- If the battery is not charged, the Headset will turn off.
- Move the PWR switch from OFF position to ON position.
•The power will turn on and a booting tone will play.
Pairing
How to use
- Prior to using the Headset for the first time, you must pair it with a
Bluetooth-enabled handset.
- There are 2 Pairing Mode Methods with the HBM-905.
MIC
Call Button/
LED Indicator
Volume Control
(Circulation)
Back
PWR Switch
Charging Port