LG GP30NB20 Manual

0 (0)
LG GP30NB20 Manual

Installation

Hardware Installation

1

attention to handling Electrostatic Devices, you may use anti-static

as wrist straps, heel straps, mats your body from electrostatic.

you have a personal computer with open USB ports before connecting your computer.

all other devices should be turn off the cables.

Connecting to computer

drive to the computer as shown in

the USB 2.0 (Y type) cable to

.

the other end of the USB 2.0 to your computer.

may get its power from the PC power. All systems may not meet power requirements and full

may not be achieved. case, connect to the USB power

.

is ready, confirm that the

. And then, insert the supplied into the drive and install the

NOTES

2

3

USB Power cable

Please do not connect the USB cables by any means other than specified above. Using the wrong type of cable with this drive can cause it to malfunction.

The appliance is not intended for use by young children or infirm persons without supervision. Young Children should be supervised to ensure that they do not play with appliance.

If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.

Location and function of controls

This following is the general figure of the design of the drive.

The drive’s appearance and specifications may change without prior notice.

Front

Tray

activity indicator

is used to indicate the operation of

Button

Eject Hole

1

2 3

4

Rear

Connector (mini)

connector is used to connect to the USB

.

1

the USB converter cable (For Windows)

supports the plug and play(not swap) function of Windows, and can be removed and inserted by the following operation.

the application software being currently used.

the icon “ ” of the taskbar located on your screen’s bottom right side.

“Safely Remove USB Mass Storage Device-Drive[x:]”.

“Ok” and then remove the USB converter cable.

NOTE

Don’t remove the USB 2.0 cable when the busy indicator on the drive blinks, or during computer startup. The removing procedure varies depending on your OS.

Loading...
+ 2 hidden pages