Cruise Control ...................................................................................................................................... 31
Floor mat installation............................................................................................................................11
Front Air Conditioning System
Control screen................................................................................................................................69
Option control screen.................................................................................................................70
Side display.........................................................................................................................................71
Using the automatic mode.........................................................................................................72
Adjusting the temperature for the driver’s and
front passenger’s seats separately (DUAL mode)
(vehicles without rear air conditioning system).......................................................... 72
Adjusting the temperature for the driver’s,
front passenger’s and rear seats separately (3-ZONE mode)
(vehicles with rear air conditioning system).................................................................72
Using the S-FLOW mode.......................................................................................................... 72
Front Seats ..............................................................................................................................................13
Fuel Tank Cap ...................................................................................................................................... 88
1
GS350_QG_OM30E50U_(U)
Page 2
Garage Door Opener.......................................................................................................................81
Destination input - Search by address ..................................................................................52
Destination input - Search points of interest by name....................................................54
Destination input - Search points of interest by category.............................................55
Destination input - Search points of interest by telephone number.........................56
Par kin g B rake .......................................................................................................................................20
Use only floor mats designed specifically for vehicles of the same model and model year
as your vehicle. Fix them securely in place onto the carpet.
*
1
Insert the retaining hooks (clips) into
the floor mat eyelets.
2
Turn the upper knob of each retaining
hook (clip) to secure the floor mats in
place.
*: Always align the marks.
The shape of the retaining hooks (clips) may differ from that shown in the illustration.
11
GS350_QG_OM30E50U_(U)
Page 12
Smart Access System with Push-button Start
The following operations can be performed simply by carrying the electronic key on your
person, for example in your pocket. (The driver should always carry the electronic key.)
For details on starting the engine, see page 16.
■ Entering the vehicle
■ Exiting the vehicle
Grip the driver’s door handle to unlock the
door. Grip the passenger’s door handle to
unlock all the doors.
Make sure to touch the sensor on the
back of the handle.
The doors cannot be unlocked for 3 seconds after the doors are locked.
Touch the lock sensor (the indentation on
the upper part of the door handle) to lock
all the doors.
Check that the door is securely locked.
■ Opening the trunk
For details on what to do when the electronic key does not operate properly, see page 91.
GS350_QG_OM30E50U_(U)
Press the button.
If the vehicle is equipped with power
trunk opener and closer, the trunk lid
automatically opens fully.
12
Page 13
Front Seats
■ Adjustment procedure
Ty p e A
Ty p e BTy p e C
Seat position adjustment switch
1
Seatback angle adjustment switch
2
Seat cushion (front) angle adjustment
3
switch
Vertical height adjustment switch
4
Seatback upper angle adjustment
5
switch (if equipped)
13
Lumbar support adjustment switch
6
Pelvic support adjustment switch (if
7
equipped)
Seat cushion length adjustment switch
8
(if equipped)
Seatback side support adjustment
9
switch (if equipped)
GS350_QG_OM30E50U_(U)
Page 14
Driving Position Memory
This feature automatically adjusts the front seats, steering wheel and outside rear view
mirrors to suit your preferences.
3
4
■ Driving position memory
■
Recording procedure
1
Check that the shift lever is in P.
2
Turn the engine switch to IGNITION ON mode.
Adjust the driver’s seat, steering wheel, and outside rear view mirrors to the desired
positions.
While pressing the “SET” button, or within 3
seconds after the “SET” button is pressed,
press button “1”, “2” or “3” until the buzzer
sounds.
If the selected button has already been
preset, the previously recorded position
will be overwritten.
■ Recall procedure
1
Check that the shift lever is in P.
2
Turn the engine switch to IGNITION ON mode.
3
Press one of the buttons for the driving
position you want to recall until the buzzer
sounds.
GS350_QG_OM30E50U_(U)
14
Page 15
■ Memory recall function (driver’s side only)
3
Each electronic key can be registered to recall your preferred driving position.
■ Registering procedure
1
Check that the shift lever is in P.
2
Turn the engine switch to IGNITION ON mode.
Recall the driving position that you want to record.
4
While pressing the recalled button, press
and hold the door lock switch (either lock
or unlock) until the buzzer sounds.
If the button could not be registered, the
buzzer sounds continuously for approximately 3 seconds.
15
GS350_QG_OM30E50U_(U)
Page 16
Engine (Ignition) Switch
Performing the following operations when carrying the electronic key on your person
starts the engine or changes engine switch modes.
2
■ Starting the engine
1
Check that the parking brake is set.
Check that the shift lever is set in P.
3
Firmly depress the brake pedal.
will be displayed on the multi-
information display. If it is not displayed,
the engine cannot be started.
4
Press the engine switch.
The engine will crank until it starts or
for up to 30 seconds, whichever is less.
Continue depressing the brake pedal
until the engine is completely started.
The engine can be started from any
engine switch mode.
GS350_QG_OM30E50U_(U)
16
Page 17
■ Stopping the engine
5
1
Stop the vehicle.
2
Shift the shift lever to P.
3
Set the parking brake.
4
Press the engine switch.
Release the brake pedal and check that “POWER ON” on the multi-information display is off.
■ Changing engine switch modes
Modes can be changed by pressing the engine switch with the brake pedal released. (The
mode changes each time the switch is pressed.)
Off
*
The emergency flashers can be used.
The multi-information display will not be
displayed.
ACCESSORY mode
Some electrical components such as the
audio system can be used.
“POWER ON” will be displayed on the
multi-information display.
IGNITION ON mode
All electrical components can be used.
“POWER ON” will be displayed on the
multi-information display.
*: If the shift lever is in a position other than
P when turning off the engine, the
engine switch will be turned to ACCESSORY mode, not to off.
17
GS350_QG_OM30E50U_(U)
Page 18
■ If your vehicle has to be stopped in an emergency
3
Press and hold for 2 seconds or more
or press briefly 3 times or more
Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way,
stop the vehicle using the following procedure:
1
Steadily step on the brake pedal with both feet and firmly depress it.
Do not pump the brake pedal repeatedly as this will increase the effort required to slow
the vehicle.
2
Shift the shift lever to N.
If the shift lever is shifted to N
3
After slowing down, stop the vehicle in a safe place by the road.
4
Stop the engine.
If the shift lever cannot be shifted to N
Keep depressing the brake pedal with both feet to reduce vehicle speed as much as
possible.
4
To stop the engine, press and hold the
engine switch for 2 consecutive seconds or
more, or press it briefly 3 times or more in
succession.
5
Stop the vehicle in a safe place by the road.
18
GS350_QG_OM30E50U_(U)
Page 19
Turn S i g n a l L eve r
The lever will return to its original position immediately after operation.
3
Right turn
1
Lane change to the right (move the
2
lever partway and release it)
The right hand signals will flash 3 times.
Lane change to the left (move the lever
partway and release it)
The left hand signals will flash 3 times.
Left turn
4
■ If the turn signals do not stop flashing after turning left or right, or if you
want to stop them flashing
Operate the lever in the opposite direction to either position or . If you move the
lever to either position or , the selected turn signals will flash.
■ Customization
The number of times the turn signals flash during a lane change can be changed.
19
14
23
GS350_QG_OM30E50U_(U)
Page 20
Parking Brake
U.S .A.Ca nad a
■ Manual mode
Sets the parking brake
1
Releases the parking brake
2
Operate the parking brake switch
while depressing the brake pedal.
Make sure that the parking brake indicator light goes off.
■ Automatic mode
The parking brake is set or released automatically according to shift lever operation.
Tu rn s a ut om at ic mo de on /of f
● When the shift lever is moved out of P,
the parking brake will be released.
● When the shift lever is moved into P, the
parking brake will be set.
Operate the shift lever with the brake
pedal depressed.
20
GS350_QG_OM30E50U_(U)
Page 21
Multi-information Display
The multi-information display presents the driver with a variety of driving-related data
including the current outside air temperature.
Eco driving ratio based on acceleration
If the acceleration exceeds Zone of
Eco driving, the right side of Eco Driving Indicator Zone Display blinks.
Zone of Eco driving
2
Eco Driving Indicator will not operate in the
following conditions:
● The shift lever is anything other than D.
● Paddle shift switch is operated.
● Neither normal mode nor Eco drive
mode is selected.
● The vehicle speed is approximately 80
mph (130 km/h) or higher.
24
GS350_QG_OM30E50U_(U)
Page 25
Headlights
(Canada)(U.S.A.)
3
(U.S.A.)
(Canada)
■ Turning on the high beam headlights
1
The side marker, parking, tail,
license plate and instrument
panel lights turn on.
2
The headlights and all the lights
listed above turn on.
The headlights, daytime running lights and all the lights
listed above turn on and off
automatically. (When the
engine switch is in IGNITION
ON mode.)
4
Off
The daytime running lights turn
on.
With the headlights on, push the lever
1
away from you to turn on the high
beams.
Pull the lever toward you to the center
position to turn the high beams off.
Pull the lever toward you and release it
2
to flash the high beams once.
You can flash the high beams with the
headlights on or off.
AFS (Adaptive Front-lighting System) secures excellent visibility at intersections and on
curves by automatically adjusting the direction of the light axis of the headlights according
to vehicle speed and the degree of the tire’s angle as controlled by steering input.
Turns the AFS on/off
The indicator turns on when the AFS is
deactivated.
GS350_QG_OM30E50U_(U)
26
Page 27
Windshield Wipers and Washer
The lever will return to its original position immediately after operation.
or oror
Off
Te m p o r a r y
operation
Te m p o r a r y
operation
Intermittent
operation
High speed
operation
Intermittent
operation
OffOff
Low speed
operation
High speed
operation
Low speed
operation
Off
Intermittent
operation
High speed
operation
High speed
operation
High speed
operation
Off
Low speed
operation
No changeNo change
Status
before
operation
Operation
■ Intermittent wipers with interval adjuster
1
2
3
4
(U.S.A.) or (Canada)
Move the lever up 2 levels
Move the lever up 1 level
(U.S.A.) or (Canada)
Move the lever down 1 level
(U.S.A.) or (Canada)
Move the lever down 2 levels
27
GS350_QG_OM30E50U_(U)
Page 28
Wiper intervals can be adjusted when inter-
6
mittent operation is selected.
Increases the intermittent windshield
5
wiper frequency
Decreases the intermittent windshield
wiper frequency
Washer/wiper dual operation
7
Wipers will automatically operate a
couple of times after the washer
squirts.
28
GS350_QG_OM30E50U_(U)
Page 29
■ Rain-sensing windshield wipers
AUTO mode
indicator
or
or
or
Off
Te m p o r a r y
operation
Te m p o r a r y
operation
Low speed
operation
High speed
operation
Low speed
operation
OffOff
High speed
operation
High speed
operation
High speed
operation
Off
Low speed
operation
No changeNo change
AUTO
mode
Intermit-
tent
operation
Off
Te m p o r a r y
operation
*
1
Low speed
operation
*
2
High speed
operation
*
2
Continu-
ously
No change
Status
before
operation
Operation
1
2
3
4
5
With AUTO mode selected, the wipers
will operate automatically when the
sensor detects falling rain. The system
automatically adjusts wiper timing in
accordance with rain volume and vehicle speed.
AUTO mode indicator will turn on
when AUTO mode is selected.
(U.S.A.) or (Canada)
Move the lever up 2 levels
Move the lever up 1 level
(U.S.A.) or (Canada)
Move the lever down 1 level
(U.S.A.) or (Canada)
Move the lever down 2 levels
AUTO mode on/off switch
1
*
: After temporary operation, the mode will return to AUTO mode.
2
*
: AUTO mode will be canceled.
29
GS350_QG_OM30E50U_(U)
Page 30
When AUTO mode is selected, the sensor
7
sensitivity can be adjusted by turning the
switch ring.
Increases the sensitivity
6
Decreases the sensitivity
Washer/wiper dual operation
8
Wipers will automatically operate a
couple of times after the washer
squirts.
30
GS350_QG_OM30E50U_(U)
Page 31
Cruise Control (if equipped)
Use the cruise control to maintain a set speed without depressing the accelerator pedal.
2
■ Setting the vehicle speed
Indicators
1
Cruise control switch
1
Press the “ON/OFF” button to activate
the cruise control.
Cruise control indicator will come on.
Press the button again to deactivate
the cruise control.
2
Accelerate or decelerate the vehicle to
the desired speed, and push the lever
down to set the speed.
“SET” indicator will come on.
The vehicle speed at the moment the
lever is released becomes the set
speed.
31
GS350_QG_OM30E50U_(U)
Page 32
■ Adjusting the set speed
Increases the speed
1
Decreases the speed
2
Fine adjustment: Momentarily move
the lever in the desired direction.
Large adjustment: Hold the lever in the
desired direction.
■ Canceling and resuming the constant speed control
Pulling the lever toward you cancels
1
the constant speed control.
The speed setting is also canceled
when the brakes are applied.
Pushing the lever up resumes the con-
2
stant speed control.
Resuming is available when the vehicle
speed is more than approximately 25
mph (40 km/h).
GS350_QG_OM30E50U_(U)
32
Page 33
Dynamic Radar Cruise Control (if equipped)
Dynamic radar cruise control supplements conventional cruise control with a vehicle-tovehicle distance control. In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates or decelerates in order to maintain a set following distance from vehicles ahead.
2
5
Vehicle-to-vehicle distance button
1
Display
Set speed
3
Indicators
4
Cruise control switch
■ Setting the vehicle speed (vehicle-to-vehicle distance control mode)
1
Press the “ON/OFF” button to activate
the cruise control.
Radar cruise control indicator will
come on.
Press the button again to deactivate
the cruise control.
2
Accelerate or decelerate the vehicle to
the desired speed, and push the lever
down to set the speed.
“SET” indicator will be displayed.
The vehicle speed at the moment the
lever is released becomes the set
speed.
33
GS350_QG_OM30E50U_(U)
Page 34
■ Adjusting the set speed
Preceding vehicle mark
3
1
2
■ Changing the vehicle-to-vehicle distance
Pressing the button changes the vehicle-tovehicle distance as follows:
1
2
Increases the speed
Decreases the speed
Fine adjustment: Momentarily move
the lever in the desired direction.
Large adjustment: Hold the lever in the
desired direction.
Long
Medium
Short
The vehicle-to-vehicle distance is set
automatically to long mode when the
engine switch is turned to IGNITION
ON mode.
If a vehicle is running ahead of you, the
preceding vehicle mark will be also displayed.
The vehicle-to-vehicle distance control mode maintains the preset cruising speed as long
as no vehicle is detected ahead.
34
GS350_QG_OM30E50U_(U)
Page 35
■ Canceling and resuming the speed control
1
Pulling the lever toward you cancels
1
the cruise control.
The speed setting is also canceled
when the brakes are applied.
Pushing the lever up resumes the
2
cruise control.
Resuming is available when the vehicle
speed is more than approximately 25
mph (40 km/h).
■ Selecting conventional constant speed control mode
Press the “ON/OFF” button to activate
the cruise control.
Press the button again to deactivate
the cruise control.
Switch to constant speed control
2
mode.
(Push the lever forward and hold for
approximately one second.)
Cruise control indicator will come on.
When in constant speed control mode,
to return to vehicle-to-vehicle distance
control mode, push the lever forward
again and hold for approximately 1 second.
35
GS350_QG_OM30E50U_(U)
Page 36
Intuitive Parking Assist (if equipped)
The distance from your vehicle to nearby obstacles when parallel parking or maneuvering into a garage is measured by the sensors and communicated via the multi-information display, Remote touch screen and a buzzer. Always check the surrounding area
when using this system.
■ Turning the system on and off
Turns the intuitive parking assist on/off
When on, the indicator light comes on to
inform the driver that the system is operational.
GS350_QG_OM30E50U_(U)
36
Page 37
BSM (Blind Spot Monitor) (if equipped)
3
The Blind Spot Monitor is a system that has 2 functions;
● The Blind Spot Monitor function
Assists the driver in making the decision when changing lanes
● The Rear Cross Traffic Alert function
Assists the driver when backing up
These functions use same sensors.
BSM main switch
1
Pressing the switch turns the system on or off. When the switch is set to on, the switch’s
indicator illuminates and the buzzer sounds. Common switch for Blind Spot Monitor
function and Rear Cross Traffic Alert function.
Outside rear view mirror indicators
2
Blind Spot Monitor function:
When a vehicle is detected in the blind spot, the outside rear view mirror indicator
comes on while the turn signal lever is not operated and the outside rear view mirror
indicator flashes while the turn signal lever is operated.
Rear Cross Traffic Alert function:
When a vehicle approaching from the right or left rear of the vehicle is detected, the
outside rear view mirror indicators flash.
Rear Cross Traffic Alert buzzer (Rear Cross Traffic Alert function only)
When a vehicle approaching from the right or left rear of the vehicle is detected, a
buzzer sounds from behind the rear seat.
37
GS350_QG_OM30E50U_(U)
Page 38
LKA (Lane-Keeping Assist) (if equipped)
While driving on a freeway or motor highway that has lane markers and no sharp curves,
the system recognizes the lanes using a camera located above the inside rear view mirror as a sensor to assist the driver with staying in the lane. The LKA system has two functions.
Lane departure warning function
1
If the system judges that the vehicle may deviate from its lane, it alerts the driver using
beeping, screen displays and a sensory warning
*: A slight steering torque is applied for a short period of time in the direction of the
center of the lane.
Lane keeping assist function
2
• This function will be active when the vehicle-to-vehicle distance control mode of the
cruise control is set with vehicle speed above approximately 45 mph (72 km/h) and
while the lane departure warning function is active.
• When the lane keeping assist function is active, a slight steering torque will be applied,
to help the driver maintain the vehicle inside the lane.
* given via the steering wheel.
■ Tu r ni n g t h e L K A s ys t em on
GS350_QG_OM30E50U_(U)
Press the “LKA” switch to activate the system.
“LKA” indicator will come on.
Press the switch again to turn the LKA
system off.
The LKA system will revert to off each
time the engine switch is turned to
IGNITION ON mode.
38
Page 39
■ Indication on the multi-information display
When the LKA system is on, the lane line display and steering wheel display are shown.
Lane keeping assist function operation
1
indication
Steering wheel displayed:
Indicates that the function is currently
operating.
Steering wheel not displayed:
Indicates that the function is not currently operating.
Dynamic radar cruise control display
2
Lane departure warning function indi-
3
cation (when the inside of the white line
is white):
The function has recognized lane
markers.
Lane departure warning function indi-
4
cation (when the inside of the white line
is black):
A lane marker is not recognized by the
system, or the LKA system functions
are temporarily canceled.
39
GS350_QG_OM30E50U_(U)
Page 40
Driving Mode Select Switch
The driving modes can be selected to suit driving condition.
1
■ Vehicles without AVS
Normal mode
For normal driving.
Press the switch to change the driving mode to normal mode when selected to Eco
drive mode or sport mode.
Eco drive mode
2
Use Eco drive mode to help achieve low fuel consumption during trips that involve frequent accelerating.
When not in Eco drive mode and the driving mode select switch is turned to the left, the
“ECO MODE” indicator comes on in the multi-information display.
Sport mode
3
Assists acceleration response by controlling the transmission and steering. Suitable for
when precise handling is desirable, for example when driving on mountain roads.
When not in sport mode and the driving mode select switch is turned to the right, the
“SPORT” indicator comes on in the multi-information display.
GS350_QG_OM30E50U_(U)
40
Page 41
■ Ve h ic le s wi th AVS
Normal mode
1
For normal driving.
Press the switch to change the driving mode to normal mode when selected to Eco
drive mode or sport mode.
Eco drive mode
2
Use Eco drive mode to help achieve low fuel consumption during trips that involve frequent accelerating.
When not in Eco drive mode and the driving mode select switch is turned to the left, the
“ECO MODE” indicator comes on in the multi-information display.
Sport mode
3
•SPORT S mode
Assists acceleration response by controlling the transmission.
When not in SPORT S mode and the driving mode select switch is turned to the right,
the “SPORT S” indicator comes on in the multi-information display.
•SPORT S+ mode
Helps to ensure steering performance and driving stability by simultaneously controlling the steering and suspension in addition to the transmission. Suitable for sporty
driving.
When in SPORT S mode and the driving mode select switch is turned to the right, the
“SPORT S+” indicator comes on in the multi-information display.
41
GS350_QG_OM30E50U_(U)
Page 42
Lexus Night View (if equipped)
Lexus night view is a system which assists with nighttime driving. Near-infrared rays are
irradiated forward and an image converted from the irradiated light is shown on the
Remote Touch screen. The image shows pedestrians, obstacles, and road conditions
ahead of the vehicle, which are difficult to see at nighttime with the naked eye.
■ Displaying the Lexus night view
1
Turn the engine switch to IGNITION ON mode.
2
Turn the headlights on.
3
Press the Lexus night view switch
The Lexus night view is displayed on the
Remote Touch screen.
To return the screen to its previous state,
press the switch again.
When the light sensor determines that it is
currently night time from the brightness of
the surrounding area, the Lexus night view
can be operated by pressing the Lexus
night view switch while the headlights are
on.
GS350_QG_OM30E50U_(U)
42
Page 43
■ The Lexus night view display
● When displaying on the main display
Lexus night view screen
1
Side display switching button
2
Brightness adjustment button
3
● When displaying on the side display
When another screen is displayed on the
main display while the Lexus night view is
being shown on the main display, the Lexus
night view screen will be displayed on the
side display.
Lexus night view screen
1
Main display switching button
2
43
GS350_QG_OM30E50U_(U)
Page 44
Tire Pressure Warning System
Your vehicle is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems
arise.
■ The tire inflation pressure display function (if equipped)
The tire pressure detected by the tire pressure warning system can be displayed on
the multi-information display.
■ Initializing the tire pressure warning system
Press and hold the tire pressure warning
reset switch until the tire pressure warning
light blinks slowly 3 times.
GS350_QG_OM30E50U_(U)
44
Page 45
Remote Touch
The Remote Touch can be used to operate the Remote Touch screens.
Refer to the “OWNER’S MANUAL” and “NAVIGATION AND MULTIMEDIA
SYSTEM OWNER’S MANUAL”.
■ Basic operation
45
“MENU” button
1
Press to display the “Menu” screen.
“•” button
2
Press to change the scale of the map and to scroll the list screen.
“HOME” button (For 8-inch display)
3
Press to display the home screen.
Remote Touch knob
4
Move in the desired direction to select a function, letter and screen button.
Press to enter the selected function, letter or screen button.
“MAP/VOICE” button (For 12.3-inch display)
5
Press to repeat a voice guidance, cancel the screen scroll, start guidance, and display
the current position.
GS350_QG_OM30E50U_(U)
Page 46
■ Menu
9
For 8-inch display
For 12 .3-i nch d ispl ay
Press the “MENU” button on the
Remote Touch to display the “Menu”
screen.
“Climate” (P. 6 8 )
1
“Compass”
2
“Info”
3
“Radio” (P.6 4 )
4
“Media” (P. 6 2 )
5
“Phone” (P. 5 7 )
6
“Setup”
7
“Display”
8
“Destination” (P.5 1 )
“LEXUS App Suite”
10
46
GS350_QG_OM30E50U_(U)
Page 47
■ Home (for 8-inch display)
6
Three-way split screen
Two-way split screen
■ Screen scroll operation
Press the “HOME” button on the
Remote Touch to display the home
screen.
The home screen can display multiple
information screens, such as the navigation system screen, audio system screen
and fuel consumption screen, simultaneously. When a screen is selected, the
selected screen is switched to a fullscreen display.
Displays the condition of the
1
Bluetooth
Select to change the display items/
2
®
connection
area and the home screen layout.
To scroll over the map screen, place the
cursor mark in the desired position and then
press and hold the Remote Touch knob.
Cursor mark
1
Distance from the current position to
2
the cursor mark.
Zooms in on the map
3
Zooms out on the map
4
Select to return to the current position.
5
Select to register as a memory point.
Select to set as a destination.
7
47
GS350_QG_OM30E50U_(U)
Page 48
■ Setting a route
1
While route guidance is operating, you can change the route using the following method.
1
Select “Options”.
2
Select “Edit Route”.
3
Select the item to be set.
Set route preferences
Set detours
2
Change route type
3
Start from adjacent road
4
Some functions are unavailable while the vehicle is in motion. Refer to the “NAVIGATION
AND MULTIMEDIA SYSTEM OWNER’S MANUAL”.
GS350_QG_OM30E50U_(U)
48
Page 49
12.3-inch Display (if equipped)
The 12.3-inch display has a display area which is 1.5 times wider than that of the 8-inch
display.
■ Full screen display
The initial screen and “Menu” screen fill the entirety of the display area.
■ Split-screen display
Different information can be displayed on
the left and right of the screen. For example,
air conditioning system or audio screens
can be displayed and operated while the
fuel consumption information screen is
being displayed. The large screen on the left
of the display is called the main display, and
the small screen to the right is called the
side display.
49
GS350_QG_OM30E50U_(U)
Page 50
■ Selecting the operation screen
2
When selecting the side display, move the Remote Touch knob to the right until is dis-
played at the boundary between the main display and the side display, and then move it further to the right. When selecting the main display, move the Remote Touch knob to the left
until is displayed at the boundary between the main display and the side display, and
then move it further to the left.
■ Display the side display
Basic screens
The following functions can be displayed and operated on the side display.
Audio (P. 6 2 )
1
Air conditioning system (P. 6 8 )
Vehicle information
3
Interruption screens
Each of the following screens is displayed automatically in accordance with conditions.
Detailed information that is not shown on the side display can be set to display on the main
display.
Select , or .
GS350_QG_OM30E50U_(U)
50
Page 51
Navigation System (if equipped)
1
4
5
7
■ Register home
3
4
5
Press the “MENU” button on the
Remote Touch.
Please refer to page 45 for the
Remote Touch operation.
2
Select “Setup”.
3
Select “Navigation”.
Select “Home”.
Select “Set Home Location”.
6
Select “Address”.
7
51
GS350_QG_OM30E50U_(U)
Select “City”.
8
Enter a city name and select “OK”.
9
Select the screen button of the desired
city name from the displayed list.
For security reasons, use a point close
to your home instead of your actual
home address.
10
Enter a street name and select “OK”.
11
When the desired street name is found,
select the corresponding screen button.
12
Enter a house number and select “OK”.
13
Select “OK”.
Page 52
■ Destination input Search by address
■
Select by city name
3
4
5
1
Press the “MENU” button on the
Remote Touch.
Please refer to page 45 for the
Remote Touch operation.
2
Select “Destination”.
3
Select “Address”.
4
Select “City”.
5
Enter a city name and select “OK”.
6
Select the screen button of the desired
city name from the displayed list.
7
Enter a street name and select “OK”.
8
When the desired street name is found,
select the corresponding screen button.
9
Enter a house number and select
“OK”.
10
Select “Go”.
11
Select “OK”.
GS350_QG_OM30E50U_(U)
52
Page 53
■ Select by street address
3
4
5
8
1
Press the “MENU” button on the
Remote Touch.
Please refer to page 45 for the
Remote Touch operation.
2
Select “Destination”.
3
Select “Address”.
4
Select “Street Address”.
5
Enter a house number and select
“OK”.
6
Enter a street name and select “OK”.
7
When the desired street name is found,
select the corresponding screen button.
Enter a city name and select “OK”.
9
Select the screen button of the desired
city name from the displayed list.
10
Select “Go”.
11
Select “OK”.
53
GS350_QG_OM30E50U_(U)
Page 54
■ Destination input Search points of interest by name
2
5
7
3
1
Press the “MENU” button on the
Remote Touch.
Please refer to page 45 for the
Remote Touch operation.
Select “Destination”.
3
Select “Point of Interest”.
4
4
Select “Name”.
Enter a POI name and select “OK”.
6
6
Select the screen button of the desired
POI.
Select “Go”.
8
Select “OK”.
54
GS350_QG_OM30E50U_(U)
Page 55
■ Destination input Search points of interest by category
2
6
8
3
1
Press the “MENU” button on the
Remote Touch.
Please refer to page 45 for the
Remote Touch operation.
Select “Destination”.
3
Select “Point of Interest”.
4
5
4
Select “Category”.
5
Select “Near a Destination”.
Select the desired POI category from
the displayed list.
7
55
GS350_QG_OM30E50U_(U)
7
Select the screen button of the desired
POI.
Select “Go”.
9
Select “OK”.
Page 56
■ Destination input Search points of interest by telephone number
2
5
3
1
Press the “MENU” button on the
Remote Touch.
Please refer to page 45 for the
Remote Touch operation.
Select “Destination”.
3
Select “Point of Interest”.
4
4
Select “Phone #”.
Enter a phone number and select
“OK”.
6
Select “Go”.
7
Select “OK”.
56
GS350_QG_OM30E50U_(U)
Page 57
Hands-free System For Cellular Phone
1
■ Bluetooth® phone pairing
Compatible Bluetooth®-equipped phones can be connected to the vehicle, enabling handsfree operation. Please refer to the cellular phone manufacturer’s user guide for pairing procedures, or go to “www.lexus.com/MobileLink
2
” (for U.S.A.) for more phone information.
®
To use a Bluetooth
phone, it is necessary
to first register it in the system.
Press on the steering wheel.
2
Select “Yes” or “OK”.
3
3
When this screen is displayed, search
for the device name displayed on this
screen on the screen of your
®
Bluetooth
device.
Refer to the cellular phone user’s manual for cellular phone operation.
device.
®
device using
4
Register the Bluetooth
your Bluetooth
5
5
Check that the following screen is dis-
®
played when registration is complete.
6
6
Select “OK” when the connection status changes from “Connecting” to
“Connected”.
57
GS350_QG_OM30E50U_(U)
Page 58
■ Contacts transfer
2
6
3
1
Press the “MENU” button on the
Remote Touch.
Please refer to page 45 for the
Remote Touch operation.
Select “Setup”.
3
Select “Phone”.
4
5
4
Select “Contact/Call History Settings”.
5
Select “Update Contacts from Phone”.
Check that a confirmation screen is
displayed when the operation is complete.
Contacts transfer may not be possible depending on phone model.
GS350_QG_OM30E50U_(U)
58
Page 59
■ Registering the contacts in the favorites list
2
7
3
1
Press the “MENU” button on the
Remote Touch.
Please refer to page 45 for the
Remote Touch operation.
Select “Setup”.
3
Select “Phone”.
4
5
4
Select “Contact/Call History Settings”.
5
Select “Add Favorite”.
6
59
GS350_QG_OM30E50U_(U)
6
Select the desired contact to add to the
favorites list.
Check that a confirmation screen is
displayed when the operation is complete.
Page 60
■ Calling by name (vehicles with navigation system)
You can call by giving a name registered in the contacts. For details, refer to the
“NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”.
1
: Pressing this switch turns the voice command system on. Say a command after the
beep.
■ Calling by favorites list
2
1
Press .
2
Say “Call <contacts> <phone types>”.
1
Press on the steering wheel.
2
Select the “Favorites” tab and select
the desired contact.
3
GS350_QG_OM30E50U_(U)
3
Select the desired number.
4
Check that the “Call” screen is displayed.
60
Page 61
■ Calling using e-mail/SMS/MMS message
2
2
The tab display may vary depending on the type of cellular phone.
1
Press on the steering wheel.
2
Select .
3
Select the desired message.
4
Select .
5
Check that the “Call” screen is displayed.
■ Receiving a call
1
1
When a call is received, this screen is
displayed with a sound.
2
Press on the steering wheel to
talk on the phone.
To refuse the call, press on the steering wheel.
■ Steering switches
61
Sending/Receiving/“Phone” screen
1
display
End call/Refuse call
Start the voice command system
3
Increases/decreases volume
4
GS350_QG_OM30E50U_(U)
Page 62
Audio System
2
■ Audio control screen
Follow the procedure below to display the audio control screen.
1
Press the “MENU” button on the
Remote Touch.
Please refer to page 45 for the
Remote Touch operation.
The “Menu” screen will be displayed.
2
Using the Remote Touch, select
“Radio” or “Media” and select each tab.
■ Side Display (vehicles with a navigation system)
Operations such as selecting a preset station or track are carried out on the screen.
Changing the audio sources
1
Station selector/selecting a track/file/
2
chapter
■ Remote control (steering wheel switches)
Some audio features can be controlled using the switches on the steering wheel.
Radio mode: Selects a radio station
1
SAT mode: Selects a channel
Audio CD mode: Selects a track
MP3/WMA/AAC disc mode: Selects
a file
DVD mode: Selects a chapter
USB mode: Selects a file/track
iPod mode: Selects a track/file
BT audio mode: Selects a track
Increases/decreases volume
Press: Change audio modes
3
Press and hold: Mute/unmute or
pause/resume the current operation
62
GS350_QG_OM30E50U_(U)
Page 63
■ Basic operation
Sound settings
1
Audio sources
2
“RADIO” button:
AM: AM radio
FM: FM radio
SAT: Satellite radio
APPS (if equipped):
Internet radio broadcast
“MEDIA” button:
DISC: DVD player/CD player
iPod: iPod
USB: USB memory
2
Bluetooth
AUX: Auxiliary audio device
Pow er/ Vol um e
3
1
*
: To listen to a satellite radio broadcast in the vehicle, a subscription to the XM Satellite
Radio service is necessary. (P.8 7 )
2
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
*
1
*
: Bluetooth® audio
63
GS350_QG_OM30E50U_(U)
Page 64
■ Radio
2
Tuning to preset stations/channels
1
Scanning for receivable stations
2
Using HD Radio
3
TM
Te c h n o lo g y ( f o r
U.S.A., if equipped)
Cache radio operation buttons
4
Press: Selects a preset station
5
Press and hold: Seeks for a station
Adjusting the frequency
6
■ Entering station presets
1
Tune in the desired station.
Select “add new”.
3
Select “Yes” on the confirmation screen.
4
Select “OK” after setting the new preset station.
Radio mode has a mix preset function, which can store up to 36 stations (6 stations per
page x 6 pages) from any of the AM, FM or SAT bands.
64
GS350_QG_OM30E50U_(U)
Page 65
■ DVD player/CD player
8
■
Playing an audio CD
■ Playing a CD with MP3/WMA/AAC files
Playback/pause
1
Repeat playback
2
Random playback
3
Selecting a track
4
Disc slot
5
CD eject
6
Playback/pause
1
Repeat playback
2
Random playback
3
Selecting a file
4
Selecting a folder
5
Selecting a file/fast forward/rewind
6
Disc slot
7
CD eject
65
GS350_QG_OM30E50U_(U)
Page 66
■ Playing a DVD
2
5
8
Full screen/Expand
1
Rewin d
Stop
3
Playback/pause
4
Fast forward
Selecting a chapter
6
Disc slot
7
DVD eject
66
GS350_QG_OM30E50U_(U)
Page 67
■ Operating an iPod
■
Playing an iPod audio
■ Playing an iPod video
Playback/pause
1
Repeat playback
2
Selecting a play mode
3
Random playback
4
Selecting a track/fast forward/rewind
5
Full screen/Expand
1
Rewind
2
Playback/pause
3
Fast for ward
4
Selecting a file
5
67
GS350_QG_OM30E50U_(U)
Page 68
Front Air Conditioning System
■ Adjusting the temperature setting
Press to increase the temperature and to decrease the temperature.
■ Adjusting the fan speed setting
Press to increase the fan speed and to decrease the fan speed.
Press the “OFF” button to turn the fan off.
■ Changing the air flow mode
To change the airflow, press .
The air outlets used are switched each time the button is pressed.
GS350_QG_OM30E50U_(U)
68
Page 69
■ Control screen
8
Without rear air conditioning system
With rear air conditioning system
Adjust the left-hand side temperature
1
setting
Adjust the fan speed setting
2
Select the air flow mode
3
: Air flows to the upper body
: Air flows to the upper body
and feet
: Air flows to the feet
: Air flows to the feet and the
windshield defogger operates
Adjust the right-hand side tempera-
4
ture setting
Display the option control screen
5
Tu rn th e f an of f
6
Select to set automatic mode on/off
7
Display the rear air conditioning operation screen (if equipped) (P. 7 3 )
69
GS350_QG_OM30E50U_(U)
Page 70
■ Option control screen
3
Select on the operation screen to display the option control screen. The functions
can be switched on and off.
Without rear air conditioning system
With rear air conditioning system
Select to set cooling and dehumidifi-
1
cation function on/off
Vehicles without rear air conditioning
2
system:
The temperature for the driver’s and
front passenger’s seats can be
adjusted separately (DUAL mode)
Vehicles with rear air conditioning system:
The temperature for the driver’s, front
passenger’s and rear seats (P. 7 3 )
can be adjusted separately (3-ZONE
mode)
Prevent ice from building up on the
windshield and wiper blades (if
equipped)
Remove pollen from the air (Pollen
4
removal mode)
70
GS350_QG_OM30E50U_(U)
Page 71
■ Side display (if equipped)
2
9
Without rear air conditioning system
With rear air conditioning system
1
Front seat air outlet selector
Fan speed control
3
Fan speed display
4
Left-hand front seat side temperature
control
5
Left-hand front seat side temperature
display
6
Right-hand front seat side temperature
display
7
Right-hand front seat side temperature
control
8
Cooling and dehumidification function on/off
Automatic mode
10
DUAL mode
11
Left-hand front seat side air outlet
selector
12
Right-hand front seat side air outlet
selector
13
3-ZONE mode
71
GS350_QG_OM30E50U_(U)
Page 72
■ Using the automatic mode
Select “AUTO” on the operation screen to turn on the airflow and adjust the temperature
setting.
■ Adjusting the temperature for the driver’s and front passenger’s seats
separately (DUAL mode) (vehicles without rear air conditioning system)
To turn on the DUAL mode, perform any of the following procedures:
● Select “DUAL” on the option control screen.
● Adjust the passenger’s side temperature setting.
■ Adjusting the temperature for the driver’s, front passenger’s and rear seats
separately (3-ZONE mode) (vehicles with rear air conditioning system)
To turn on the 3-ZONE mode, perform any of the following procedures:
● Select “3-ZONE” on the option control screen.
● Adjust the passenger’s side or rear seats temperature setting.
■ Using the S-FLOW mode
Press the S-FLOW mode button to operate
the system.
When the S-FLOW mode button is
pressed, the airflow changes as follows.
Without rear air conditioning system:
Air flows to the front seats only.
With rear air conditioning system:
Air flows to the front seats only, and if the
passenger seat is unoccupied, the set
temperature, outside humidity and temperature inside the cabin are assessed,
and air flows to the driver seat only.
: Air may also flow to the rear seats
*
depending on the situation.
*
*
GS350_QG_OM30E50U_(U)
72
Page 73
Rear Air Conditioning System (if equipped)
1
4
■ Front controller
Air outlet mode display
1
Temperature display
2
Temperature control
3
Air outlet selector
4
Off
5
Automatic mode
6
Temperature control
Off
2
Automatic mode
3
Disabling the switches on the rear armrest
73
GS350_QG_OM30E50U_(U)
Page 74
Seat Heaters/Seat Ventilators (if equipped)
The seat can be warmed and air from the seat can improve ventilation.
■ Front seat heaters and ventilators (if equipped)/rear seat heaters (if
equipped)
Front seats
Rear seats
Seat heater switches
1
The indicator light (yellow) on the
switch comes on when the seat
heater is operating.
Seat ventilator switches (front seats
2
only)
The indicator light (green) on the
switch comes on when the seat ventilator is operating.
Level indicator lights
3
The seat heater temperature level
or the seat ventilator fan speed level
(for front seats only) is displayed.
“AUTO” indicator lights
4
GS350_QG_OM30E50U_(U)
74
Page 75
● Modes and indicators
The mode can be changed by pressing the switch.
Mode“AUTO” indicator lightLevel indicator lights
OffOffOff
Automatic*
HiOff3
MidOff2
LoOff1
On3 to 1, or off
*: When automatic mode is selected, the level automatically changes depending on the air
conditioning settings.
If the driving mode select switch is switched to Eco drive mode in cold temperatures, the
seat heater may be automatically operated to assist heating performance. (P. 4 0 )
75
GS350_QG_OM30E50U_(U)
Page 76
Voice Command System
1
NOTE: When inputting voice commands you must wait until after the beep to speak.
■ Basic operation
Press the talk switch.
To cancel the voice command system,
press and hold the talk switch.
2
After a beep sounds, say the desired
command.
On the list screen, you can select the
desired command.
Continue on to pages 77-80 for a detailed list of Voice Commands for the following categories:
Voice commands can be used while driving.
You must wait until after the beep to say a command.
In vehicles with a navigation system, a large (TALK icon) will appear on the navi-
gation screen to prompt you to say a command.
If you know what command to use, you can press at any time to interrupt the
voice guidance.
If a desired outcome is not shown, or if no selections are available, press on the
steering wheel to return to the previous screen.
76
GS350_QG_OM30E50U_(U)
Page 77
■ Command list
Basic
Command
“Help”
“Go Back”Returns to the previous screen
“Go to <tab>”Displays the command list of the selected tab
“More Hints”Displays more commonly used commands
“Cancel”Cancels the voice command system
Apps (vehicles with a navigation system) (if equipped)
Command
“Launch <apps>”Activates the LEXUS App Suite application
Navi (vehicles with a navigation system)
Command
“Find <POI category>”
“Enter an Address”Enables setting a destination by saying the address
“Go Home”Displays the route to home
“Pause Route Guidance”Stops the route guidance
“Resume Route Guidance”Resumes the route guidance
“Show <POI> icons”Displays the specified POI icons
“Delete Destination”Deletes the destination
“Previous Destination”Displays previous destinations
Prompts voice guidance to offer examples of commands or operation methods
Displays a list of <POI category*1> near the current
position
2
*
Action
Action
Action
1
*
: For example; “Gas stations”, “Restaurants”, etc.
2
*
: Depending on the search results, a POI list may be provided by a relevant POI applica-
tion of the LEXUS App suite.
77
GS350_QG_OM30E50U_(U)
Page 78
Phone
Action
“Redial”
“Call Back”
Command
Places a call to the phone number of the latest outgoing call
Places a call to the phone number of latest incoming
call
“Show Recent Calls”Displays the call history screen
“Dial <phone number>”Places a call to the said phone number
“Call <contacts> <phonetypes>”
Place a call to the said phone type of the contact from
the phone book
Radio
Command
Action
“Tune to <frequency> AM”Changes the radio to the specified AM frequency
“Tune to <frequency> FM”Changes the radio to the specified FM frequency
“Play <genre> station”
“Tune to FM <frequency>
HD <number>”
“Tune to preset <number>”
“Tune to <name>”
“Tune to channel <number>”
“Play <genre> satellite station”
Changes the radio to an FM station of the specified
genre
Changes the radio to the specified HD radio station
Changes the radio to the specified preset radio sta-
tion
Changes the radio to the satellite radio channel with
the specified name
Changes the radio to the specified satellite radio
channel number
Changes the radio to a satellite radio channel of the
specified genre
GS350_QG_OM30E50U_(U)
78
Page 79
Audio
Command
“Play Playlist <name>”Plays tracks from the selected playlist
“Play Artist <name>”Plays tracks from the selected artist
“Play Song <name>”Plays the selected track
“Play Album <name>”Plays tracks from the selected album
Info
Command
“Destination Assist”*
“Show Forecast”Displays weather information
“Show Traffic”Displays traffic information
“Lexus Insider”*
Connects the system to the Lexus response center
Displays the Lexus insider list
Action
Action
*: Vehicles with a navigation system
79
GS350_QG_OM30E50U_(U)
Page 80
Other
Command
“Turn Climate Control On”Turns air conditioning system on
“Turn Climate Control Off”Turns air conditioning system off
“Warmer”
“Cooler”
“<#> degrees”
“Turn Music On”Turns the audio system on
“Turn Music Off”Turns the audio system off
“A M Ra d io ”Selects AM radio mode
“FM Radio”Selects FM radio mode
“Sirius XM”Selects satellite radio mode
“Disc”Selects the selected disc mode
“USB”Selects USB audio mode
“iPod”Selects iPod audio mode
“Bluetooth*2 Audio”
“A .V. ”Selects VTR mode
“Auxiliary”Selects AUX audio mode
Increases the temperature of the air conditioning sys-
tem
Decreases the temperature of the air conditioning
system
Changes the set temperature of the air conditioning
system to <#> degrees
Selects Bluetooth® audio mode
Action
1
*
1
*
: Only within the possible temperature range of the air conditioning system
2
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Commands relating to operation of the audio/visual and air conditioning systems can only
be performed when the audio and air conditioning systems are turned on. Refer to the
“OWNER’S MANUAL” and “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S
MANUAL”.
80
GS350_QG_OM30E50U_(U)
Page 81
Portable Audio Device Ports
These ports can be used to connect a portable audio device and listen to it through the
vehicle’s speakers.
The garage door opener can be programmed to operate garage doors, gates, entry
doors, door locks, home lighting systems, security systems, and other devices.
Open the console box, open the cover and
connect the portable audio device.
Garage Door Opener (if equipped)
The garage door opener (HomeLink® Universal Transceiver) is manufactured under
®
license from HomeLink
■ Programming the HomeLink® (for U.S.A. owners)
The HomeLink® compatible transceiver in your vehicle has 3 buttons which can be programmed to operate 3 different devices. Refer to the programming method below appropriate for the device.
.
Indicator light
1
Buttons
2
81
GS350_QG_OM30E50U_(U)
Page 82
■ Programming HomeLink
®
1
Hold your hand-held transmitter 1 to 3
in. (25 to 75 mm) of the HomeLink
®
buttons.
2
Press and hold down the desired
®
HomeLink
3
For U.S.A. owners:
While pressing the HomeLink
button.
®
button, press and hold down the button
on the hand-held transmitter until the
indicator light changes from a slow to
a rapid flash.
For Canadian owners:
®
While pressing the HomeLink
button, repeatedly press and release
(cycle) the button on the hand-held
transmitter every 2 seconds until the
indicator light changes from a slow to
a rapid flash.
If your garage door is of the rolling code
type:
4
Press the training button on the motorhead unit in your garage.
5
Press and hold the vehicle’s pro-
®
grammed HomeLink
button for 2
seconds and release it. Repeat this step
once again.
If the door does not open, press and
release the same button once again.
GS350_QG_OM30E50U_(U)
82
Page 83
■ Programming other devices
Safety Connect is a subscription-based telematics service that uses Global Positioning
System (GPS) data and embedded cellular technology to provide safety and security
features to subscribers. Safety Connect is supported by Lexus’ designated response
center, which operates 24 hours per day, 7 days per week.
Safety Connect service is available by subscription on select, telematics hardwareequipped vehicles.
1
For U.S.A. owners:
To program an entry gate, see the OWNER’S MANUAL.
To program other devices, contact your Lexus dealer.
For C anadian owners:
To program all other devices, follow the same procedure as for garage door programming.
■ Operating HomeLink
Lexus Enform Safety Connect (if equipped)
■ System components
®
Press the appropriate HomeLink® button.
The indicator light should come on.
“SOS” button
LED light indicators
2
Microphone
3
83
GS350_QG_OM30E50U_(U)
Page 84
■ Services
Subscribers have the following Safety Connect services available:
● Automatic Collision Notification
In case of either airbag deployment or severe rear-end collision, the system is designed
to automatically call the response center. The responding agent receives the vehicle’s
location and attempts to speak with the vehicle occupants to assess the level of emergency. If the occupants are unable to communicate, the agent automatically treats the
call as an emergency, contacts the nearest emergency services provider to describe the
situation, and requests that assistance be sent to the location.
*
*: U.S. Patent No. 7,508,298 B2
● Stolen Vehicle Location
If your vehicle is stolen, Safety Connect can work with local authorities to assist them in
locating and recovering the vehicle. After filing a police report, call the Safety Connect
response center at 1-800-25-LEXUS (1-800-255-3987) and follow the prompts for
Safety Connect to initiate this service.
In addition to assisting law enforcement with recovery of a stolen vehicle, Safety-Connect-equipped vehicle location data may, under certain circumstances, be shared with
third parties to locate your vehicle. Further information is available at Lexus.com.
● Emergency Assistance Button (“SOS”)
In the event of an emergency on the road, push the “SOS” button to reach the Safety
Connect response center. The answering agent will determine your vehicle’s location,
assess the emergency, and dispatch the necessary assistance required.
If you accidentally press the “SOS” button, tell the response-center agent that you are
not experiencing an emergency.
● Enhanced Roadside Assistance
Enhanced Roadside Assistance adds GPS data to the already included warranty-based
Lexus roadside service.
Subscribers can press the “SOS” button to reach a Safety Connect response-center
agent, who can help with a wide range of needs, such as: towing, flat tire, fuel delivery, etc.
For a description of the Roadside Assistance services and their limitations, please see the
Safety Connect Terms and Conditions, which are available at Lexus.com.
■ Subscription
After you have signed the Telematics Subscription Service Agreement and are enrolled,
you can begin receiving services.
A variety of subscription terms are available. Contact your Lexus dealer, call
1-800-25-LEXUS (1-800-255-3987) or push the “SOS” button in your vehicle for further subscription details.
GS350_QG_OM30E50U_(U)
84
Page 85
Lexus Enform (for U.S.A., if equipped)
Lexus Enform is a service that includes Safety Connect, Remote, Destinations, Insider
and App Suite.
For details, refer to the “OWNER’S MANUAL” and “NAVIGATION AND
MULTIMEDIA SYSTEM OWNER’S MANUAL”.
■ Function achieved by using a cellular phone (with navigation system)
■
Services
Of the functions included with Lexus Enform, only LEXUS App Suite can be achieved by
using a cellular phone.
LEXUS App Suite is a service that enables the usable contents of a cellular phone to be displayed on and operated from the navigation screen. Before LEXUS App Suite can be used,
a few settings need to be performed.
● LEXUS App Suite
When LEXUS App Suite is activated, an application may need to update. By updating, an
application can be kept the latest version. To updating the application, it is necessary to
download the updated data and install it.
■ Subscription
LEXUS App Suite will be available on a trial period included upon purchase of a new vehicle. User registration is required to start using the service.
When a trial period has elapsed after purchasing a new vehicle, a fee will be charged to
renew the contract. Services requiring a separate contract can also be used. For details,
refer to http://www.lexus.com/enform/
or call 1-800-255-3987.
■ Function achieved by using DCM and the navigation system
(with navigation system)
■
Services
Of the functions included with Lexus Enform, LEXUS Enform Destinations (Destination
Assist, eDestination), and Lexus Insider can be achieved by making DCM cooperate with
the navigation system.
These are subscription-based telematics services that use Global Positioning System (GPS)
data, embedded cellular technology to provide safety and security as well as convenience
features to subscribers. The services are supported by Lexus’ designated response center,
which operates 24 hours a day, 7 days a week.
The services are available by subscription on select, telematics hardware-equipped vehicles.
85
GS350_QG_OM30E50U_(U)
Page 86
● Destination Assist
Destination Assist provides you with live assistance for finding destinations via the Lexus
response center. You can request either a specific business, address, or ask for help
locating your desired destination by category, such as restaurants, gas stations, shopping
centers or other points of interest (POI).
After you tell the agent your choice of destination, its coordinates are sent wirelessly to
your vehicle’s navigation system.
● eDestination
With the eDestination feature, you can go online, and via the Lexus.com owner’s Web
site, select and organize destinations of your choice and then wirelessly send them to
your vehicle’s navigation system.
Up to 200 locations can be stored online and accessed or updated at any time.
Locations can be organized into up to 20 personalized folders.
You must first go online at www.lexus.com/drivers/
will need to register and log in. After this, personalized folders that contain the locations
to be sent to your vehicle can be created. (See Lexus Enform Guide for more information.)
● Lexus Insider
Lexus Insider is an optional service that can send audio messages, or articles, to participating owners’ vehicles via the navigation system. Potential Lexus Insider subjects might
include, for example, Lexus vehicle technology tips, updates on regional Lexus events, or
audio excerpts from Lexus Magazine articles.
to view the Owners site where you
■ Subscription
After you have signed the Telematics Subscription Service Agreement and are enrolled,
you can begin receiving services. A variety of subscription terms are available.
Contact your Lexus dealer, call 1-800-25-LEXUS (1-800-255-3987), or select the
“Destination Assist” in your vehicle for further subscription details.
■ Function achieved by using DCM
■
Services
Of the functions included with Lexus Enform Safety Connect, Safety Connect can be
achieved by using DCM.
● Lexus Enform Safety Connect (P. 8 3 )
■ LEXUS Enform Remote
Services
■
Lexus Enform Remote is a cellular phone application that lets you view and remotely
control certain aspects of your vehicle.
For details about the functions and services of this application, refer to
http://www.lexus.com/enform/
Function of the Lexus Enform Remote is achieved by using an embedded cellular device
in the vehicle (DCM: Data Communication Module).
. For further details, contact your Lexus dealer.
■ Subscription
P. 8 6
86
GS350_QG_OM30E50U_(U)
Page 87
XM Satellite Radio
An XM Satellite Radio is a tuner designed exclusively to receive broadcasts provided
under a separate subscription.
For details, refer to the “OWNER’S MANUAL” and “NAVIGATION AND
MULTIMEDIA SYSTEM OWNER’S MANUAL”.
■ Subscription
For XM Services requiring a subscription (such as XM Radio), the following paragraph shall
be included.
Required XM Radio monthly subscriptions sold separately after trial period. Subscription
fee is consumer only. All fees and programming subject to change. Subscriptions are
subject to the Customer Agreement available at www.siriusxm.com.
www.xmradio.ca
and 10 Canadian provinces.
For more information, program schedules, and to subscribe or extend subscription after
complimentary trial period; more information is available at:
U.S.A. Customers:
Visit www.siriusxm.com
Canadian Customers:
Visit www.xmradio.ca
(Canada) XM service only available in the 48 contiguous United States
or call 1-877-515-3987
or call 1-877-438-9677
(U.S.A.) or
87
GS350_QG_OM30E50U_(U)
Page 88
Fuel Tank Cap
■ Before refueling the vehicle
● Close all the doors and windows, and turn the engine switch off.
● Confirm the type of fuel.
■ Opening the fuel tank cap
1
With the doors unlocked, press the
center of the rear edge of the fuel filler
door.
Push until you hear a click and take
your hand away to slightly open the fuel
filler door. Then open the door fully by
hand.
2
Turn the fuel tank cap slowly to open.
3
Hang the fuel tank cap on the back of
the fuel filler door.
88
GS350_QG_OM30E50U_(U)
Page 89
What to do if...
List of Warning/Indicator Lights
Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous.
(U.S.A.)
Brake system warning light
(Canada)
Stop the vehicle immediately.
Charging system warning light
Have the vehicle inspected immediately.
(Flashes)
(U.S.A.)
Slip indicator
Malfunction
indicator lamp
(Canada)
(Flashes)
SRS warning light
(Flashes)
“AFS OFF” indicator
(if equipped)
(U.S.A.)
Parking brake
indicator
(U.S.A.)
ABS warning light
(Canada)
Electric power steering
system warning light
(Flashes)
(Blinking
and then
continu-
ously on)
(Canada)
Brake system warning light
Tire pressure warning light
“PCS” warning light
(if equipped)
For further information, refer to the OWNER’S MANUAL.
For further information, refer to the OWNER’S MANUAL.
1
*
: It also comes on due to natural causes such as natural air leaks and tire inflation pressure
changes caused by temperature. Adjust the tire inflation pressure to the specified level.
The light will turn off after a few minutes. In case the light does not turn off even if the tire
inflation pressure is adjusted, have the system checked by your Lexus dealer.
2
*
: Refer to “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”.
GS350_QG_OM30E50U_(U)
“A I R B AG O N/
OFF” indicator
90
Page 91
What to do if...
If the electronic key does not operate properly
■ Unlocking and locking the doors
■ Unlocking the trunk
Use the mechanical key in order to perform
the following operations:
Locks all the doors
1
Closes the windows and moon roof
2
(turn and hold)
Unlocks the door
3
Turning the key rearward unlocks the
driver’s door. Turning the key once
again within 5 seconds unlocks the
other doors.
Opens the windows and moon roof
4
(turn and hold)
*: This setting must be customized at your
Lexus dealer.
*
*
Turn the mechanical key clockwise to open.
91
GS350_QG_OM30E50U_(U)
Page 92
What to do if...
1
Brake pedal
■ Starting the engine
Ensure that the shift lever is in P and
depress the brake pedal.
2
Touch the Lexus emblem side of the
electronic key to the engine switch.
The engine switch will turn to IGNITION ON mode.
When the smart access system with
push-button start is deactivated in customization setting, the engine switch
will turn to ACCESSORY mode.
3
Firmly depress the brake pedal and
check that is shown on the
multi-information display.
4
Press the engine switch.
In the event that the engine still cannot be operated, contact your Lexus dealer.
If the electronic key battery becomes depleted, replace it with a new battery. For instructions on replacing the battery, refer to the OWNER’S MANUAL. If you need further assistance, contact your Lexus dealer.
If the engine doesn’t start
Make sure that the correct operating procedures have been followed.
Make sure that the brake pedal is firmly
depressed when attempting to start the
engine. (P.1 6 )
If the engine still does not start, see the OWNER’S MANUAL for more information or contact your Lexus dealer.
92
GS350_QG_OM30E50U_(U)
Page 93
Memo
93
GS350_QG_OM30E50U_(U)
Page 94
Your Lexus dealer
Your Lexus dealer will provide quality maintenance and any other assistance
you may require.
If there is not a Lexus dealer near you, please call the following number: