Lenovo Yoga Book C930 Quick Start Guide [vi]

Yoga Book C930

Quick Start Guide

English/Tiếng Việt

English

Reading ﬁrst - regulatory information

Device models equipped with wireless communications comply with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. In addition, if your product contains a telecom modem, it complies with the requirements for connection to the telephone network in your country.

Be sure to read the Regulatory Notice for your country or region before using the wireless devices contained in your device. To obtain a PDF version of the Regulatory Notice, refer to the “Downloading publications” section below.

Getting support

To get support on network services and billing, contact your wireless network operator. To learn how to use your device and view its technical speciﬁcations, go to http://support.lenovo.com.

Downloading publications

Electronic versions of your publications are available from http://support.lenovo.com Your User Guide contains detailed information about your device. To access your User Guide, go to http://support.lenovo.com and follow the instructions on the screen.

Legal notices

Lenovo and the Lenovo logo are trademarks of Lenovo in the United States, other countries, or both. Other company, product, or service names may be trademarks or service marks of others. Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925. This manual applies to Lenovo YB-J912F (WLAN) / Lenovo YB-J912L (WLAN + LTE).

Contents

Device overview ........................................................................................1

Preparing your device............................................................................2

Getting started..........................................................................................3

Logging in with your ﬁngerprint........................................................5

Using the E Ink Screen .......................................................................... 6

Lenovo Precision Pen ........................................................................... 13

Important safety and handling information ................................ 16

Service and support information ..................................................... 17

Warranty information...........................................................................18

Environmental, recycling, and disposal information ................ 19

Alkaline battery warnings .................................................................. 22

European Union compliance statement ...................................... 23

Speciﬁc Absorption Rate information ..........................................24

1 Device overview

• Read this guide carefully before using your device.

• All pictures and illustrations in this document are for reference only

and may dier from the ﬁnal product.

Camera

Fingerprint sensor /

indicator

Card tray

Type-C connector: used for charging and connecting to digital

9 10

headsets, and so on.

Only 10 can be used to connect an analog headset connector adapter.

Power button

Microphone

E Ink Screen

Charging indicator

Volume up button13Volume down button

LCD Screen

Speakers

2 Preparing your device

microSD

SIM

Installing cards

Install the cards as shown in the ﬁgure.

• Power o the device before inserting or removing a card.

• Note that the WLAN version (Lenovo YB-J912F) does not have

a Nano-SIM card slot.

Charging your device

Connect your device to a power outlet using the USB cable and power adapter provided.

Charging indicator status

Status Position Description

Blinking fast: (white)

Blinking slow: (white)

Solid white The device is connected to a charger

Left side The battery percentage is lower than

The side the adapter is connected to

5%, and the device is powered on while not connected to a charger.

The device is connected to a charger and is charging.

and is fully charged.

3 Getting started

Open the cover using the following two methods:

Opening with Knock To Open

Place the device on a ﬂat surface with its cover facing up, double tap the cover, and it will open automatically.

Then manually adjust the display opening to a suitable angle.

• Avoid knocking the cover too frequently, and wait at least 15 seconds between attempts.

• To avoid temporary response failure with Knock To Open, avoid pressing on the area around the hinge. In case of failure, fully open the cover to 180 degrees and close it again to restore function.

• The cover may open if it is touched by another object or the table shakes.

• Do not place heavy objects on top of the device.

• The Knock To Open function is unavailable if the device has

never been charged before or the battery is lower than 2%.

Opening with the volume down button

Press and hold the volume down button until the cover of your device opens automatically.

Powering on for the ﬁrst time

When powering on your device for the ﬁrst time, press and hold the power button until the ﬁngerprint indicator lights up. Complete the setup process by following to the onscreen instructions. Setup may include the following steps:

• Accept End User License Agreement

• Set up your Internet connection

• Create your user account

The battery is set to Ship Mode at the factory, meaning it is unactivated and will not provide power to the device. Connect your device to the power adapter before using it for the ﬁrst time.

Positioning the display

You can rotate the display up to 360 degrees.

When opened beyond approximately 200 degrees, the LCD screen continues displaying while the E Ink Screen locks and

displays.

Double tap the E Ink Screen with your ﬁnger to switch the display from the LCD screen to the E Ink Screen.

If you want to wake the LCD again, double tap it.

When waking the screen, make sure your other ﬁngers do not touch the screen; otherwise, it may not wake.

4 Logging in with your ﬁngerprint

Touch the ﬁngerprint sensor to quickly unlock the screen.

It is recommended to follow the onscreen instructions and register your ﬁngerprint when powering on your device for the ﬁrst time. You can also go to

> > Accounts > Sign-in options > Fingerprint to register a ﬁngerprint.

Before using ﬁngerprint functions, you need to set a lock

screen password. Go to

Password to set up.

Registering a ﬁngerprint

Follow the onscreen instructions to register your ﬁngerprint.

1. Fully cover the ﬁngerprint sensor with your ﬁnger and press gently for 1 second.

2. Repeat this operation with dierent areas of the same ﬁnger until the ﬁngerprint is successfully registered.

You can register up to 10 ﬁngerprints.

Please keep your ﬁnger and the ﬁngerprint sensor surface clean.

Water, sweat, and oil may aect ﬁngerprint registration.

Fingerprint indicator status

Status Description

Solid white Registering/identifying a ﬁngerprint.

O The ﬁngerprint sensor is inactive.

The device is turning on/o.

> > Account > Login Options >

5 Using the E Ink Screen

E Ink Toolbar

In the upper right corner of the E Ink Screen is the E Ink Toolbar as shown below. Tap the icons to quickly enter the corresponding functions. To learn more about using the E Ink Screen, you can read the instructions. Tap

E Ink

Keyboard

> Help > E Ink Display Operation Guide.

E Ink Note

E Ink

Reader

E Ink Screen

Settings

Close E Ink

Toolbar

Bring up

E Ink Toolbar

Current

mode

E Ink Keyboard

Your E Ink Keyboard is a revolutionary new keyboard using electronic ink display with a standard keyboard layout. You can set the keyboard style and language you prefer.

Modern (Default)

Larger keys provide a better user experience.

Tap

to show the trackpad, and tap any letter or symbol key to

switch back to the space bar.

In keyboard mode, you can only tap with your ﬁngers to input

content on the E Ink Screen. The Lenovo Precision Pen or other writing instruments are not supported.

E Ink Note

When E Ink Note is enabled, you can take a note or sketch immediately, even if your LCD screen is locked. The Lenovo Precision Pen* supports pressure and hover functions, and you can use it to write and draw as you would with a regular pen and paper.

Creating a new

note

Browsing E Ink

notes

E Ink Note

Toolbar

Creating a new note

E Ink Note is preset with various note templates. Tap

to create a new note.

Writing in E Ink Note

When writing a new note, the contents will be displayed on the E Ink Screen and saved automatically.

Input tools Select and

*The Lenovo Precision Pen does not come with all models, and is sold separately. To purchase one, go to http://www.lenovo.com/accessories.

copy

Undo and

redo

Pen/touch

switch

Writing method

Switch between using touch or Lenovo Precision Pen to write or draw. You can use your ﬁnger or the pen, but not both, to write or draw.

Yoga Book

E Ink Note Toolbar

Pen tools

You can write or draw on the E Ink Screen. Press and hold the icon for more options:

: Set the pen thickness.

: Turn on the Smart Brush switch. Smart brush

automatically turns free hand drawings into regular shapes.

Eraser tools

Move the tip over the area you want to erase to eraser it.

Press and hold the icon for more options. Tap content in this page.

Screenshot tool

Take a screenshot of the LCD screen and paste the picture into E Ink Note. Then you can edit the picture, such as resizing or deleting it. Tap edit it again.

E Ink Note supports the handwriting optimization function. To use it, lift your pen 5 mm above the E Ink Screen after writing, and the function renders your handwriting with smoother strokes. You can continue writing again after optimization.

Yoga Book

to clear all

and then the screenshot to

Selecting and copying

Yoga Book Yoga Book

Yoga

1. Tap

2. Tap

Press and hold the icon for more options. You can copy the content as Image, Text, Formula, or Graph. You can then paste it into supported applications.

Browsing E Ink notes

Tap be displayed. Tap a page thumbnail to view this page.

To learn how to use E Ink Note, see the instructions. Go to > > Help.

, then draw a line around the content to select this section.

to copy the content. The page is copied by default if no

content is selected.

, and a list of thumbnails for all of the pages in E Ink Note will

Display all page thumbnails in full screen. Tap to view all page thumbnails in list mode.

Delete notes. Select the note you want to delete and tap Delete.

E Ink Note Settings. You can set Text Recognition Language, Note Template, and so on.

E Ink Reader

When E Ink Reader is enabled, you can browse PDF or other ﬁles① on the E Ink Screen. E Ink Reader relieves eye strain.

① Depends on the software version.

1. Tap

2. Open the ﬁle list and ﬁnd the ﬁle you want

3. To turn the page, tap on the left/right side

E Ink Reader Toolbar

Tap the central area of the E Ink Screen to bring up E Ink Reader Toolbar. Tap the central area again to hide the toolbar.

Select a ﬁle from the ﬁle list.

Enter a page number to quickly jump to that page.

Zoom in. The page is enlarged to ﬁt the screen size by default. Tap the central area of on the screen to bring up the Zoom View menu.

: Move to see other parts of the page.

: Adjust the page to ﬁt the screen size.

: Adjust the magniﬁcation.

: Exit zoomed view.

to open E Ink Reader.

to read.

of the screen, or swipe left/right with your ﬁnger.

Selecting and copying

to select an area of the page.

1. Tap to take a screenshot of the currently selected area and save

2. Tap

the picture to the clipboard. You can then paste it into Paint or other supported applications.

Tap

to cancel the selection.

Displaying a full page/showing two pages

In landscape, tap by side.

/ to display a full page/show two pages side

E Ink Screen Settings

You can personalize your E Ink Screen. Tap on the E Ink Screen, and select the corresponding tab.

E Ink Keyboard

• Keyboard Sound

You can turn on/o the keyboard sound and adjust its volume.

If your device is muted, Keyboard Sound is also muted, even if the

Keyboard Sound setting is on.

• Keyboard Vibration

When typing with Keyboard Vibration on, you can feel a slight vibration of the keyboard as if you were pressing physical keys. Keyboard Vibration is enabled by default. You can turn keyboard vibration on/o and adjust the vibration level.

• Keyboard style

The E Ink Keyboard uses a standard layout. You can set the keyboard style and color.

• Keyboard Language

You can change the keyboard language. The keyboard language does not change automatically when you change the system language; you must change it manually. You can select a keyboard language from the language list and choose an input method. For details about system language and keyboard language, see the user guide at https://www.support.lenovo.com. To change the keyboard language to Japanese, do the following:

1. Go to

languages > Add a language. Add Japanese to the list of preferred languages.

2. Tap Japanese > Options > Change layout > Japanese Keyboard

(106/109 Key), then restart the device.

3. On the E Ink Screen, tap

E Ink Image Settings You can choose to replace or close the E Ink Image.

Knock To Open

You can enable/disable the Knock To Open function.

Legal Information

You can view the legal information related to this device.

Help

To learn how to use the E Ink Screen, tap this tab.

> > Time & Language > Region & language > Preferred

If you selected Japanese as your system language during initial

setup, the above actions are unnecessary.

> Keyboard language > Japanese.

6 Lenovo Precision Pen

With 4096 levels of pressure detection and the hover function, you can use Lenovo Precision Pen in place of your ﬁngers for more great experiences such as taking screenshots or working with speciﬁc applications to write or draw on both the LCD screen and E Ink Screen.

The Lenovo Precision Pen does not come with all models,

and is sold separately. To purchase one, go to http://www.lenovo.com/accessories

Overview

Pen indicator status

Status Description

Solid White Bluetooth pairing is enabled.

Blinking slow: White Bluetooth is in process of pairing.

Blinking fast: White Bluetooth has been paired.

Blinking slow: Amber The battery is low.

Bluetooth button

Indicator LED

Upper side button

Lower side button

Tip

Installing a battery

1. Remove the cap in the

direction shown in the ﬁgure.

2. Place an AAAA alkaline

battery into the body of the pen with the negative end facing down.

3. Replace the cap on the pen.

Make sure the ﬂat surface of the pen body is aligned with the ﬂat surface of the cap.

You can start to use Lenovo Precision Pen after installing the battery.

• AAAA alkaline batteries may only be available in some countries and regions.

• Please be cautious when using the Lenovo Precision Pen. The pen contains sensitive electronic components including a battery. Dropping it may cause damage.

Pairing a pen

1. Go to > > Devices > Bluetooth and Other Devices > Add Bluetooth or Other Devices > Bluetooth.

2. Press and hold the Bluetooth button on the pen for at least 3 seconds until the LED indicator blinks white, indicating Bluetooth pairing is turned on.

3. On your device, select Lenovo Precision Pen and start pairing.

4. After pairing, click the Bluetooth button on the pen to access more functions. To access other functions, double click the Bluetooth button.

+ 37 hidden pages