Lenco LBT-188 operation manual

Model: LBT-188

User manual - Turntable with bluetooth transmission

Gebruikshandleiding - Platenspeler met Bluetooth-overdracht

Bedienungsanleitung - Plattenspieler mit Bluetooth-Übertragung

Guide d’utilisation - tourne-disque avec transmission Bluetooth

Manual de usuario – Tocadiscos con transmisión Bluetooth

Index

English .......................................................................................................... 2

Nederlands................................................................................................. 24

Deutsch ...................................................................................................... 48

Français ...................................................................................................... 73

Español....................................................................................................... 98

Version: 1.0

English

LBT-188

CAUTION:

Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This unit should not be adjusted or repaired by anyone except qualified service personnel.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not use this device near water.

2. Clean only with a slightly damp cloth.

3. Do not cover or block any ventilation openings. When placing the device

on a shelf, leave 5 cm (2”) free space around the whole device.

4. Install in accordance with the supplied user manual.

5. * Don’t step on or pinch the power adaptor. Be very careful, particularly

near the plugs and the cable’s exit point. Do not place heavy items on

the power adaptor, which may damage it. Keep the entire device out of

children’s reach! When playing with the power cable, they can seriously

injure themselves.

6. * Unplug this device during lightning storms or when unused for a long

period.

7. Keep the device away from heat sources such as radiators, heaters,

stoves, candles and other heat-generating products or naked flame.

8. Avoid using the device near strong magnetic fields.

9. Electrostatic discharge can disturb normal usage of this device. If so,

simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a staticfree environment.

10. Warning! Never insert an object into the product through the vents or

openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or

near swimming pools.

12. Do not use this device when condensation may occur.

13. Although this device is manufactured with the utmost care and checked

several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

14. This device must operate on a power source as specified on the

specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

15. * The socket outlet must be installed near the equipment and must be

easily accessible.

16. * Do not overload ac outlets or extension cords. Overloading can cause

fire or electric shock.

17. * Devices with class 1 construction should be connected to a main

socket outlet with a protective earthed connection.

18. * Devices with class 2 construction do not require a earthed connection.

19. Keep away from rodents. Rodents enjoy biting on power cords.

20. * Always hold the plug when pulling it out of the main supply socket. Do

not pull the power cord. This can cause a short circuit.

21. Avoid placing the device on any surfaces that may be subject to

vibrations or shocks.

22. To clean the device, use a soft dry cloth. Do not use solvents or petrol

based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.

23. The supplier is not responsible for damage or lost data caused by

malfunction, misuse, modification of the device or battery replacement.

24. Do not interrupt the connection when the device is formatting or

transferring files. Otherwise, data may be corrupted or lost.

25. If the unit has USB playback function, the usb memory stick should be

plugged into the unit directly. Don’t use an usb extension cable because

it can cause interference resulting in failing of data.

26. The apparatus shall not be exposed to dripping or splashing and make

sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

27. * To completely disconnect the power input, the mains plug of the

apparatus shall be disconnected from the mains, as the disconnect device is the mains plug of apparatus.

28. If the unit works with battery, Battery shall not be exposed to excessive

heat such as sunshine, fire or the like.

29. Attention should be drawn to the environmental aspects of battery

disposal.

30. The apparatus can only be used in moderate extremely cold or climates

warm environments should be avoided.

31. The rating label has been marked on the bottom or back panel of the

apparatus.

32. This device is not intended for use by people (including children) with

physical, sensory or mental disabilities, or a lack of experience and

knowledge, unless they’re under supervision or have received

instructions about the correct use of the device by the person who is responsible for their safety.

33. This product is intended for non professional use only and not for

commercial or industrial use.

34. Make sure the unit is adjusted to a stable position. Damage caused by

using this product in an unstable position or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

35. Never remove the casing of this apparatus.

36. Never place this apparatus on other electrical equipment.

37. Do not use or store this product in a place where it is subject to direct

sunlight, heat, excessive dust or vibration.

38. Do not allow children access to plastic bags.

39. Only use attachments/accessories specified by the manufacturer.

40. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the apparatus, when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

41. *Do not use a damaged power cord or plug or a loose outlet. Doing so

may result in fire or electric shock.

42. Prolonged exposure to loud sounds from personal music players may

lead to temporary or permanent hearing loss.

INSTALLATION

• Unpack all parts and remove protective material.

• *Do not connect the unit to the mains before checking the mains voltage

and before all other connections have been made.

* Those instructions are related only to products using power cable or AC

power adaptor.

COMPONENTS, FEATURES AND CONNECTIONS

1. Counterweight

2. Anti-skating Stub

3. Turntable Platter

4. Tonearm Lift Lever

5. Tonearm Rest

6. 33/45 Selector

7. Tonearm

8. Stop/Start Knob

9. Cartridge

10. Lid

11. Lid Hinge

12. Ground Connector

13. PHONO & Line Out Jacks

14. PHONO & Line Out Switch

15. Anti-skating Weight

16. USB-PC port

17. AC-DC Power Jack

18. Bluetooth Indicator

19. Power Rocker Switch

Please check thoroughly and make sure you find the following items that

1) Unit

2) Adaptor with EU-UK plug-end

3) Counterweight

4) Platter with Belt

5) 45 RPM Adaptor

6) Turntable mat

7) Instruction Manual

8) Cartridge Alignment Protractor

9) USB-PC Cable

10) 2pcs lid spare rubber

11) Anti-skating Weight

come along with this package:

This turntable is supplied with a factory fitted and adjusted cartridge. **The following instructions for adjusting the cartridge are provided in case the cartridge is replaced by a different model at a later date.

Installing the Lid

Install the Lid carefully over the hinge prongs.

Turntable Platter and Belt Setup

1. Install the drive belt over the inner ring under the platter and make sure it won’t fall off during the setup.

2. Place the platter through the turntable spindle, then rotate the platter until you see the drive motor pulley through the window at the top left corner.

3. Carefully grab the drive belt and put it around the slot of motor pulley.

4. Connect the power adapter to the turntable and power on the turntable.

5. Set the Motor Start/Stop switch to the Start position to see if the platter motor spins. If the platter does not spin, try the steps listed above again.

Cartridge Down force Adjustment

The Counterweight supplied is suitable for cartridges weighing between

3.0-6.0g.

- Gently push and turn the Counterweight onto the rear of the tonearm

(with the scale facing toward the front of the turntable).

- Remove the cartridge protection cap.

- Lower the tonearm lift and position the cartridge in the space between

tonearm rest and platter. Carefully rotate the Counterweight until the tonearm balances out. The tonearm should return to the balanced position if it is moved up or down. This adjustment must be done carefully.

- Once the tonearm is correctly balanced return it to its’ rest. Hold the

Counterweight without moving it, and gently rotate the Down force Scale ring until the zero is in line with black line on the rear of the tonearm. Check whether the arm still balances out.

- Rotate the counterweight counter clockwise (seen from the front) to

Down force

Groove in the stub

5 - 10mN

1 st from bearing rings

10 - 15mN 15 – 20mN

2 nd " " " 3rd " " "

20mN and bigger

4 th " " "

adjust the down force according to the cartridge manufacturer’s

recommendations. One mark on the scale represents 0.05g of down force.

NOTE: The recommended down force for the factory fitted cartridge is

3.5±0.5g.

Anti-skating force adjustment

The anti-skating force must be adjusted corresponding to the down force as follows:

Slip the loop of the anti-skating weight's thread over the 3rd groove of the stub to set the correct anti-skating force for the factory-fitted cartridge. Feed the thread through the loop of the wire support.

Connection to the Amplifier

This turntable uses a moving magnetic cartridge. Set the PHONO & Line Out Switch on PHONO mode. Connect the phono out cables to the phono input on your amplifier of pre-amplifier (phono stage). Line inputs such as CD, Tuner, Tape, or Video are not suitable for phono inputs. Make sure

the amplification of the selected input matches the type of cartridge being used. The factory installed cartridge is 47k ohms/MM-input.

NOTE: If your amplifier does not have an input suitable for phono cartridges, you will need to purchase a separate phono amplifier for moving magnetic cartridges. This separate phono amplifier will then connect between your turntable and your amplifier.

Stereo System Connection

Set the PHONO & Line Out Switch on LINE mode. The RCA PHONO & Line Out Jacks output analog line-level signals and could be connected

directly with a par of active/powered speakers of the appropriate input of your stereo system. The Red plug connects with the Right channel and the White plug connects with the Left channel.

NOTE: The RCA Jacks are not designed to be connected directly to the passive/unpowered speakers on LINE mode. If connected to the passive speakers, there is no sound.

Main Power Connection

The power adaptor is in the foam packing material. Unpack the power adaptor and plug the small end into the DC power jack located at the back side of the turntable. Plug the power adaptor into your power outlet.

Operation

Turntable Operation

1. Connect the included power adapter to unit and press the power rocker switch to be “ON” position.

2. Remove the needle cover from the cartridge.

3. Place the slipmat on the platter and place a record on the slipmat. If using 45 RPM records, put the 45 RPM adapter on the center spindle before placing the record on the platter.

4. Set the 33/45 RPM Selector according to the type of record.

5. Turn the Start/Stop dial to the Start position to begin spinning the platter.

6. Unlock the arm clip and set the Lift Lever to the up position.

7. Position the tonearm over the desired location (groove) on the record.

8. Move the tonearm lift lever to the down position to move the tonearm toward the record. Alternatively, place the needle over the desired location on the record.

9. Carefully lower the tonearm on the record.

10. When you are finished playing the record, raise the tonearm, return it to rest on the arm clip, and turn the Start/Stop dial to the Stop.

Bluetooth Operation

This unit has a Bluetooth transmitter to send audio to a Bluetooth speaker wirelessly.

1. Power on your Bluetooth speaker and ensure it is in pairing mode.

2. Power on the unit, the BT will auto search when the unit turn on, the BT indicated light flashing.

3. When pairing, the light will flash twice per second, then change to be long lighting when paired; Note: This unit will connect to the closest Bluetooth speaker that is near it. If after 2 minutes no Bluetooth speaker can be found to pair

with, the Bluetooth transmitter will become inactive and the LED will turn off.

4. To disconnect pairing, power off the turntable or turn off Bluetooth pairing on your Bluetooth speaker.

Recording the LP into PC through USB jack:

For installing and recording step please reference to the BRIEF INTRODUCTION OF AUDACITY. http://audacity.sourceforge.net/ Recording the vinyl to your computer:

1). Follow the detail step as above Turntable Operation to play the vinyl.

2). Double click the Audacity and follow the record steps showing on the BRIEF INTRODUCTION OF AUDACITY.

Audacity and USB Connection

It supports Windows95/Window XP/Window 7/Vista or more advanced version, with the EMS memory more than 128MB and Audacity take space of 5MB.

Instruction for PC Encoding

1. Software instruction

1.1) Connect the USB cable with your turntable and your computer. No extra driver is required.

1.2) Download the Audacity software from http://audacity.sourceforge.net/ Follow the instructions to complete installation.

2. Recording

2.1) Open the software

2.2) Choose “Edit” menu, then choose “Preferences”;

2.3) Audacity Preferences

NOTE: you need to check your computer audio properties, the sound recording should be selected: SSS USB Audio Device” as below:

Output volume

Input Volume

2.4) Adjust the output and input volume

2.5) Select the record button ● to record the disc, the left and right tracks will show on the interface:

2.5.1 ⑤ Press this button , start recording.

2.5.2 ⑥ Click the button to skip to start;

2.5.3 ⑦ Click the button to skip to end;

2.5.4 ⑧ Click the button to play;

2.5.5 ⑨ Click the button to pause the record play;

2.5.6 ⑩ Click the button to stop the recording.

3. Export the Music Files for WAV, MP3, Format.

· Once you have finished recording, you should save your music to the

computer.

· Click File menu and move down to Export as WAV format, MP3 format or

Ogg format.

· Click on any format to save the music, and you will be asked for the file

name of the music recording.

· Note: Audacity does not export MP3 files directly; you should download

the LAME MP3 encoder. A link to find LAME MP3 can be found at http://audacity.sourceforge.net

If do not see the sound wave on the interface, when recording, please adjust the line in volume as follows:

Specific Steps as follows:

1) Download “lame_enc.dll” file, and install it to the software list.

2) Open the “Audacity” software, click Main Menu, Select “edit”,

“Parameter”, “File Formats”, and click the “Searcher”.

3) After opened, it will come to the following menu, click “YES” to go to

“Llame_enc.dll”, and find the file’s location.

4) After you find the “lame_enc.dl” file, open it and click “Y” to finish

the installation.

Maintenance and Cleaning

Your turntable requires little of no regular maintenance. Remove dust with a slightly damp antistatic cloth. Never use a dry cloth, this will create static electricity and attract more dust! Antistatic cleaning agents are available at specialist stores, but must be applied sparingly to avoid damage to rubber parts. It is recommended to install the needle cover before cleaning or maintenance is carried out to avoid damage. If the turntable is not used over a long period of time, the drive belt should be removed to prevent unequal stretching.

NOTE: Always disconnect the record player from the power supply as a precaution before maintenance!

Useful Tips

The turntable should be positioned on a low-resonance surface such as wood or multiple layer ply board to avoid structural vibrations disturbing playback.

Cartridge Replacement

1. Before replacement, put the stylus protector back on the stylus to prevent damage to the stylus during the replacement process.

2. Carefully remove the wire leads from the original cartridge.

3. Loosen the two screws on the headshell that are securing the cartridge and then remove the original cartridge.

4. Mount the new cartridge to the headshell and tighten it lightly. Do not completely tighten the screws at this moment.

5. Connect the wire leads to the new cartridge’s terminals. The wire lead color codes are as below: White Left channel positive (L+) Black Left channel negative (L–)

Red Right channel positive (R+)

Nominal Speeds

33 1/3 & 45RPM

Speed Variance

±1%

Wow and Flutter

≤0.15%

Signal to Noise

55dB

Down force Range

3.0-6.0g

Effective Tonearm Length

8.6” (218.5mm)

Overhang

0.73in

Power Consumption

5W (Max)

Outboard Power Supply

12V/500mA

AC-DC

Dimensions (W x H x D)

420 x 360 x 125mm

Weight

4.8kgs

Black Right channel negative (R-)

6. Adjust the cartridge’s position to make sure it is precisely aligned on the headshell so that the stylus will be tracking the grooves in parallel perfectly. To achieve this, place the included paper cartridge alignment protractor over the turntable spindle, carefully lift the tone arm and place the tip of the stylus on the points marked 130mm and 250mm respectively. Fine tune the cartridge’s position on the headshell until the cartridge is perfectly in parallel with the reference lines at both points.

7. Tighten the screws completely once the perfect alignment is achieved.

NOTE: If you are unfamiliar or uncomfortable with completing this procedure, we recommend consulting with a professional to perform the installation.

Technical Specifications:

Technical Specifications: AT-3600L (audio-technica)

Frequency response

20Hz-20kHz

Recommended load resistance

47kohms

Channel balance

<2.5dB

Amplifier connection

MM - input

Channel separation

>18dB

Recommended tracking force

3.5±0.5g

Output voltage

2.5mV

Weight

Potential Incorrect Use and Fault Conditions

These turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances. Therefore the following list of common fault symptoms is included.

The platter doesn’t turn although the unit is switched on:

- The unit is not connected to the main power supply.

- No power at the outlet.

- Drive belt is not installed or has slipped off.

- The unit automatically switched in standby mode, power OFF and ON

again on the backside.

No signal through one or other channel or both channels:

- Phone input not selected at amplifier.

- Amplifier not switched on.

- Amplifier or speakers muted.

- No connection to the speakers.

- No connection between turntable and amplifier.

- Wire leads not connected the cartridge.

Strong hum on phono input:

- No ground connection from cartridge, arm, or arm cable to amplifier or

ground loop.

- Turntable too close to speakers.

Distorted of inconsistent sound from one or both channels:

- Turntable is connected to wrong input of amplifier.

- Needle or cantilever damaged.

- Drive belt overstretched or dirty.

- Platter bearing without oil, dirty or damaged.

- Dust on stylus.

- MM/MC switch on pre-amplifier set incorrectly.

Remark: Due to the ErP Stage 2 requirements for power saving measures, a unit which is connected to the mains power will switch itself to standby mode automatically if no music has been playing for about 20 minutes.

If your unit switches off regularly, this is no defect.

Power supply adaptor

Manufacturer: BRIGHTPOWER OPTOELECTRONIC TECHNOLOGY CO., LTD

Model number: SW1200500-FM

Use only the power supply listed in the user instructions

Guarantee

Lenco offers service and warranty in accordance with the European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly. Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires. This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of

electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

CE Marking

Products with the CE marking comply with the EMC Directive (2014/30/EU) and the Low Voltage Directive (2014/35/EU) issued by the Commission of the European

Community. Hereby, Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this product is in compliance with the essential requirements. The declaration of conformity may be consulted at techdoc@lenco.com

Service

For more information and helpdesk support, please visit www.lenco.com Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.

Nederlands

LBT-188

LET OP:

Gebruik van bedieningen of afstellingen of uitvoer van procedures anders dan gespecificeerd in deze documentatie kan leiden tot blootstelling aan schadelijke straling. Dit apparaat dient uitsluitend te worden aangepast of gerepareerd door gekwalificeerd onderhoudspersoneel.

VOORZORGSMAATREGELEN VOOR GEBRUIK

ONTHOUD DE VOLGENDE INSTRUCTIES:

1. Gebruik dit apparaat niet in de buurt van water.

2. Reinig het uitsluitend met een licht vochtige doek.

3. Bedek of blokkeer de ventilatieopeningen niet. Wanneer u het apparaat

op een schap plaatst, dient u 5 cm (2”) vrije ruimte rondom het gehele

apparaat te behouden.

4. Installeer het product volgens de meegeleverde gebruikershandleiding.

5. *Nooit op de stroomadapter stappen of deze indrukken. Wees

voornamelijk voorzichtig in de buurt van de stekkers en het punt waar de kabel uit het apparaat komt. Plaats geen zware voorwerpen op de stroomadapter, om beschadiging ervan te voorkomen. Houd het gehele apparaat buiten bereik van kinderen! Wanneer kinderen met de voedingskabel spelen, kunnen zij ernstig letsel oplopen.

6. *Haal de stekker uit het stopcontact tijdens onweer of wanneer u deze

langere tijd niet gebruikt.

7. Houd het apparaat uit de buurt van hittebronnen, zoals radiatoren,

verwarmingen, kachels, kaarsen en andere hittegenererende producten of open vuur.

8. Gebruik dit apparaat niet in de buurt van krachtige magnetische velden.

9. Elektrostatische ontlading kan normaal gebruik van dit apparaat

verstoren. U hoeft het apparaat in dit geval slechts te resetten en opnieuw op te starten volgens de gebruikershandleiding. Wees voorzichtig tijdens bestandsoverdracht en gebruik het product in een omgeving zonder statische interferentie.

10. Waarschuwing! Steek nooit een voorwerp via de ventilatie- of andere

openingen in het product. Er is hoogspanning in het product aanwezig en als u er een object insteekt, kan dat een elektrische schok veroorzaken en/of kortsluiting in de interne onderdelen. Mors om dezelfde reden geen water of vloeistof op het product.

11. Gebruik het toestel niet in vochtige ruimtes, zoals badkamers, stomende

keukens of in de buurt van zwembaden.

12. Gebruik dit apparaat niet wanneer condensatie kan optreden.

13. Alhoewel dit apparaat met grote zorg gefabriceerd en verschillende

keren geïnspecteerd is voordat het de fabriek verlaat, is het nog steeds mogelijk dat er problemen optreden, zoals met alle elektrische apparaten. Als u rook, een overmatige hitteontwikkeling of enig ander onverwacht verschijnsel opmerkt, moet u onmiddellijk de stekker van het netsnoer uit het stopcontact halen.

14. Dit apparaat moet werken op een voedingsbron, zoals aangegeven op

het specificatieplaatje. Als u twijfelt over het type voeding dat gebruikt wordt in uw huis, raadpleeg dan uw dealer of plaatselijk energiebedrijf.

15. *Het stopcontact moet in de buurt van de apparatuur zijn geïnstalleerd

en eenvoudig te bereiken zijn.

16. *Overbelast stopcontacten of verlengsnoeren niet. Overbelasting kan

brand of een elektrische schok veroorzaken.

17. *Apparaten met een Klasse 1 structuur dienen te worden aangesloten

op een stopcontact met een beschermende aardverbinding.

18. *Apparaten met een Klasse 2 structuur vereisen geen aardverbinding.

19. Houd het uit de buurt van knaagdieren. Knaagdieren knauwen graag aan

voedingskabels.

20. *Houd altijd de stekker vast wanneer u deze uit het stopcontact trekt.

Trek nooit aan de voedingskabel. Dit kan tot een kortsluiting leiden.

21. Vermijd om het toestel te plaatsen op een ondergrond die blootgesteld

kan worden aan trillingen of schokken.

22. Gebruik een zacht, droog doekje om het apparaat te reinigen. Gebruik

geen oplosmiddelen of op benzine gebaseerde vloeistoffen. U kunt een vochtig doekje met verdund schoonmaakmiddel gebruiken om hardnekkige vlekken te verwijderen.

23. De leverancier is niet verantwoordelijk voor schade of verloren gegevens

veroorzaakt door storing, misbruik, modificatie van het apparaat of batterijvervanging.

24. Onderbreek nooit de verbinding wanneer het apparaat formatteert of

bestanden overdraagt. De gegevens kunnen anders corrupt of verloren raken.

25. Indien het apparaat een USB-afspeelfunctie heeft, moet de USB-

geheugenstick rechtstreeks op het apparaat worden aangesloten. Gebruik geen USB-verlengkabel, omdat die kan leiden tot storingen met foutieve gegevens als gevolg.

26. Het apparaat mag niet worden blootgesteld aan druppels of spatten en

zorg ervoor dat er geen met vloeistof gevulde voorwerpen, zoals vazen, op of nabij het apparaat zijn geplaatst.

27. *Om de verbinding met de stroomaansluiting volledig te verbreken,

moet de stekker van het apparaat uit het stopcontact worden gehaald, omdat de stekker van het apparaat de hoofdschakelaar is.

28. Indien het apparaat op batterijen kan werken, dan mogen de batterijen

niet aan overmatige hitte, zoals zonlicht, open vuur e.d. worden blootgesteld.

29. Aandacht voor het milieu is nodig bij het verwijderen van de batterijen.

30. Het apparaat kan alleen worden gebruikt in gematigde klimaten.

Extreem koude of warme omgevingen moeten worden vermeden.

31. Het nominale specificatielabel is te vinden op het paneel aan de onder-

of achterkant van het apparaat.

32. Dit apparaat is niet bestemd voor gebruik door mensen (inclusief

kinderen) met fysieke, zintuiglijke of geestelijke gebreken of gebrek aan kennis en ervaring, tenzij zij onder toezicht staan of instructies hebben over het juiste gebruik van het apparaat hebben gekregen van de persoon die verantwoordelijk is voor hun veiligheid.

33. Dit product is alleen voor niet-professioneel gebruik bedoeld en niet

voor commercieel of industrieel gebruik.

34. Verzeker u ervan dat het apparaat in een stabiele positie staat opgesteld.

Schade, veroorzaakt door het gebruik van dit product in een onstabiele positie, of door het niet naleven van waarschuwingen of voorzorgsmaatregelen genoemd in deze handleiding, valt niet onder de garantie.

35. Verwijder nooit de behuizing van dit apparaat.

36. Plaats dit apparaat nooit op andere elektrische apparatuur.

37. Dit product niet gebruiken of opslaan op plaatsen waar het wordt

blootgesteld aan direct zonlicht, hitte, buitensporig veel stof of trillingen.

38. Geef kinderen geen gelegenheid in aanraking met plastic zakken te

komen.

39. Gebruik uitsluitend uitbreidingen/accessoires gespecificeerd door de

fabrikant.

40. Laat alle reparaties over aan gekwalificeerd onderhoudspersoneel.

Onderhoud is vereist als het toestel hoe dan ook is beschadigd, zoals bijvoorbeeld het netsnoer of de stekker, wanneer er vloeistof of een voorwerp in het apparaat is terechtgekomen, wanneer het apparaat is

blootgesteld aan regen of vocht, als het niet normaal werkt of is

1. Tegengewicht

2. Antiskating-mechanisme

3. Draaitafelplateau

4. Ophefhendel toonarm

5. Toonarmsteun

6. 33/45-toerenschakelaar

7. Toonarm

8. Stop-/startknop

9. Cartridge

gevallen.

41. *Gebruik nooit een beschadigde voedingskabel of stekker of een los

stopcontact. Dit vormt namelijk een risico op brand of elektrische schokken.

42. Langdurige blootstelling aan luid geluid van persoonlijke muziekspelers

kan leiden tot tijdelijke of permanente gehoorbeschadiging.

INSTALLATIE

• Pak alle onderdelen uit en verwijder de beschermende materialen.

• *Sluit het apparaat niet aan op het stopcontact, voordat u de

netspanning hebt gecontroleerd en voordat alle andere aansluitingen zijn gemaakt.

* deze instructies zijn enkel van toepassing voor producten met een

voedingskabel of een AC voedingsadapter.

ONDERDELEN, EIGENSCHAPPEN EN AANSLUITINGEN

10. Deksel

11. Dekselscharnier

12. Aarde-verbinding

13. PHONO & Lijnuitgangen

14. PHONO & Lijnuitgangschakelaar

15. Antiskating-gewicht

16. USB-PC-poort

17. AC/DC-voedingsingang

18. Bluetooth-indicator

19. Aan-/uittuimelschakelaar

1) Hoofdeenheid

2) Adapter met EU-UK stekkeruiteinde

3) Tegengewicht

4) Draaiplateau met riem

5) Adapter 45 TPM

6) Mat voor draaiplateau

7) Handleiding

8) Gradenboog voor uitlijning van cartridge

9) USB-PC-kabel

10) Reserverubber voor deksel 2 stuks

11) Antiskating-gewicht

Controleer a.u.b. zorgvuldig of de volgende onderdelen zijn inbegrepen in de verpakking:

Deze platenspeler wordt geleverd met een cartridge dat in de fabriek is bevestigd en afgesteld. **De volgende instructies voor aanpassing van de cartridge zijn verstrekt voor in het geval dat de cartridge op een later tijdstip wordt vervangen door een ander model.

+ 92 hidden pages