LauraStar S4a, S5a, S6a, S7a, X1a User Manual

EN

User manual for Laurastar upgraded
equipment.

FOR THE UPGRADED MODELS

LAURASTAR

S4a/S5a/S6a/S7a/X1a

F1a/X2a/F2a/Pulse

SERVICE CODE: LUK_A4 (A0)

Switching on

2a

2b

Be sure to carefully read user manual
of your model of the Laurastar equipment,
main usage features like (filling with water,
installation, cleaning, and safety
precautions etc.) are not reflected in the
current manual.

It is very important to strictly follow all
advices and operate features of the
ironing system according to the
instructions, which could be found in
the user manual provided by

equipment

manufacturer.

Plug the system into an electricity socket.

Turn on the main system switcher.

1

First system usage

2

3a

3b

3c

3d

In order to produce steam while
ironing, use the button “Manual
Steam Delivery”.

Change the fan directions Fan /
Vacuum with the short term, (no more
than 3 sec.), “Fan” button push.

Change the steam delivery mode pulsing /
continuous with the long (more than
3 sec.) pushing and holding of the “Fan”
button, switching between the modes
is accompanied with the short beep
sound.

3

Change the steam pulsing velocity, and fan

off delay, in a programming mode,

by pushing “Fan” + “Manual Steam
Delivery” buttons for more than 3 seconds.

Switching between modes programming and
usage is accompanied by 3 beeps of an
alarm.

Ironing