NEXUS-SL
STUDIO LIVE
Welcome
Dear Player,
Thank you very much for purchasing your new Laney product and becoming part of the worldwide Laney
family. Each and every Laney unit is designed and built with the utmost attention to care and detail, so I
trust yours will give you many years of enjoyment.
Laney products have a heritage which stretches back to 1967 when I first began building valve amplifiers in
my parent’s garage.
Since then we have moved on from strength to strength developing an extensive range of guitar, bass,
public address, multi instrument and keyboard amplification products along with a list of Laney endorsees
that includes some of the world’s most famous and respected musicians.
At the same time we believe we have not lost sight of the reason Laney was founded in the first place - a
dedication to building great sounding amplification for working musicians.
Warm Regards,
Lyndon Laney Chairman & Founder
2
WARNING: When using electrical products, basic cautions should always be followed, including the following:
1. Read these instructions.
2. Keep these instructions safe.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
9. An apparatus with Class I construction shall be connected to a mains socket outlet with a protective connection. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point they exit from the apparatus.
11. Only use attachments/accessories provided by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. The mains plug or appliance coupler is used as the disconnect device and shall remain readily operable. The user should allow easy access to any mains plug, mains
coupler and mains switch used in conjunction with this unit thus making it readily operable. Unplug this apparatus during lightning storms or when unused for long periods
of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
15. Never break off the ground pin. Connect only to a power supply of the type marked on the unit adjacent to the power supply cord.
16. If this product is to be mounted in an equipment rack, rear support should be provided.
17. Note for UK only: If the colours of the wires in the mains lead of this unit do not correspond with the terminals in your plug‚ proceed as follows:
a) The wire that is coloured green and yellow must be connected to the terminal that is marked by the letter E‚ the earth symbol‚ coloured green or
coloured green and yellow.
b) The wire that is coloured blue must be connected to the terminal that is marked with the letter N or the colour black.
c) The wire that is coloured brown must be connected to the terminal that is marked with the letter L or the colour red.
18.This electrical apparatus should not be exposed to dripping or splashing and care should be taken not to place objects
containing liquids, such as vases, upon the apparatus.
19. Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in susceptibility to
noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time.
The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise
level exposures: According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss.
Earplugs or protectors to the ear canals or over the ears must be worn when operating this amplification system in order to
prevent a permanent hearing loss, if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous
exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high
sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation.
3
Important Safety Instructions
4
5
Introduction
+
Design Features:
+
Hybrid Tube Bass Amplifier, "Loaded with a high voltage ECC83 tube for natural tube warmth and
compression, along with a wide dynamic range, forming the source of the Nexus-SL’s tone”.
+
Up to a 1000Watts of controllable sound dynamics from twin power amplifiers & tube stage, with
individual speaker outputs allowing a wide range of cabinets to be used without fear of overload.
+
Ease of use with simple ergonomic fascia layout.
+
Built in, Laney designed, high quality digital bass effects for sound enhancement.
+
USB-DAW connection facility with Re-Amp for all your recording requirements.
+
Effects loop facility for outboard processors.
+
DSP, Compressor, Tilt, Touch functions.
+
Professional balanced DI facilities to connect to any PA desk.
+
Headphone facility for silent practice.
+
Auxiliary input for backing tracks.
+
Full protection against any load errors or over temperature with fast auto re-set.
+
Built in automatic fan cooling in high ambient temperatures.
+
Universal mains input for worldwide usage without the need to change anything except your power
cord.
+
Small, rugged, all steel, light weight, rack mountable construction with carry bag, remote 4way
footswitch control and rack adaptor wings included.
6
Professional Hybrid Tube Bass Amplification
STUDIO LIVE
Up & running......
HORN
ON
OFF
FULL
HALF
INPUT
LINK
POWER RATING:
400 WATTS RMS
8 OHMS
N115
www.laney.co.uk
SERIAL NUMBER
DESIGNED AND ENGINEERED IN THE UK BY LANEY
MODEL
N115
MADE IN CHINA
LZB12 34
O
B
M
O
C
-
K
C
A
J
"
/
4
1
S
P
E
A
K
O
N
O
B
M
O
C
-
K
C
A
J
"
/
4
1
S
P
E
A
K
O
N
HORN
ON
OFF
FULL
HALF
INPUT
LINK
POWER RATING:
600 WATTS RMS
8 OHMS
N410
www.laney.co.uk
SERIAL NUMBER
DESIGNED AND ENGINEERED IN THE UK BY LANEY
MODEL
N410
MADE IN CHINA
LZB12 34
O
B
M
O
C
-
K
C
A
J
"
/
4
1
S
P
E
A
K
O
N
O
B
M
O
C
-
K
C
A
J
"
/
4
1
S
P
E
A
K
O
N
N410
N115
N410
N115
WITH TWO (8 Ohm)
EXTENSION CABINETS
Guitar
7
Loading...