Laney HCM30, HCM30R, HCM60R, HCM120R, HCM60B Owner's Manual
...
Laney
USER MANUAL
Laney
1 1
INTRODUCTION
Congratulations on your decision to purchase a Laney amplifier.
Laney products are designed with ease of operation as a primary objective, however to ensure you derive the best from your new amplifier, it is important you take time to read this user manual and to familiarise yourself with the control functions and facilities available
BEFORE
SWITCHING ON
After unpacking your amplifier check that it is factory fitted with a three pin 'grounded' (or earthed) plug. Before plugging into the power supply ensure you are connecting to a grounded earth outlet.
If you should wish to change the factory fitted plug yourself, ensure that the wiring convention applicable to the country where the amplifier is to be used is strictly conformed to. As an example in the United Kingdom the cable colour code for connections are as follows.
EARTH OR GROUND - GREEN/YELLOW
NEUTRAL - BLUE
LIVE - BROWN
This manual has been written for easy access of information. The front and rear panels of each unit are graphically illustrated, with each control and feature numbered. For a description of the function of each control feature, simply check the number with the explanations adjacent to each panel.
Your Laney amplifier has undergone a thorough two stage, pre-delivery inspection, involving actual play testing, as well as burn in.
When you first receive your Laney amp, follow these simple procedures:
(I)Ensure that the amplifier is set at the correct voltage for the country it is to be used in.
(ii)Connect your instrument with a high quality instrument cable. Use of cheap cables will compromise the sound of your instrument and your amplifier.
If there is a problem with your Laney amplifier
DON'T
DO
PHONE YOUR DEALER!
Care of your Laney amplifier will prolong it's life.....and yours!.
Laney
2 1
HCM30/30R
|
4 5 6 |
|
|
4 5 6 |
|
4 5 6 |
|
4 5 6 |
|
4 5 6 |
|
4 5 6 |
4 5 6 |
|
HCM30R |
Ard ore |
ax |
||||||||
|
7 |
3 |
3 |
7 |
7 |
3 |
7 |
|
H C |
M |
|||||||||||||||
|
3 |
|
|
7 |
|
|
3 |
|
3 |
7 |
|
7 |
3 |
|
|
|
|
1 |
|||||||
|
2 |
|
8 On! 2 |
|
8 2 |
|
|
8 |
2 |
|
8 2 |
8 2 |
|
8 2 |
|
8 |
|
|
|
|
|||||
|
1 |
|
9 |
1 |
|
9 |
1 |
|
|
9 |
1 |
|
9 |
1 |
9 |
1 |
|
9 |
1 |
|
9 |
|
|
|
0 |
|
0 |
10 |
|
|
0 |
10 |
|
0 |
10 |
|
0 |
10 |
|
0 |
10 |
|
0 |
10 |
0 |
10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
Input |
clean |
|
Crunch |
|
Master |
Max |
Bass |
|
|
Mid |
|
Treble |
Reverb |
CD/Line |
Foot |
External |
Head |
Power |
|||||||
|
|
|
|
|
Equalization |
|
|
In |
switch |
speaker |
phones |
|
|||||||||||||
|
Volume |
|
factor |
|
volume |
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
1 |
|
2 |
|
3 |
|
4 |
|
|
5 |
|
6 |
7 |
|
|
8 |
|
|
9 |
|
10 |
11 |
12 |
13 |
14 |
|
* Diagram shows HCM30R. HCM30 has identical features apart from reverb
1GUITAR INPUT: Socket provided for connecting electric guitar...
2CLEAN VOLUME: Sets the overall listening level of the clean channel.
3CRUNCH FACTOR ON!: Engages the CRUNCH channel
4CRUNCH FACTOR: Sets the level of distortion.within the crunch channel..
5MASTER VOLUME: Controls the overall listening level of the overdrive channel.
6MAX BUTTON: Engages the MAX feature. This provides a scooped EQ boost to the signal giving the amplifier a very unique distortion tone......try it out!
7BASS: Controls the low frequency EQ in the preamplifier.
8
9
MIDDLE: Controls the mid frequency EQ in the preamplifier.
TREBLE: Controls the high frequency EQ in the preamplifier.
10REVERB: Sets the required level of reverb.
11CD/LINE INPUT: Sockets for connection of external CD player.
12FOOTSWITCH: Socket for connection of FS2 footswitch allowing remote switching of channel & reverb features.
13EXTERNAL SPEAKER: Socket for connecting an external 4/8 Ohm speaker enclosure. Connecting an external speaker automatically isolates the internal speaker.
14HEAD PHONES: Socket for connecting external headphones. Connecting headphones automatically isolates the internal speaker.
Loading...