Laney CP10-II, CP12-II, CP15-II, CM10-II, CM12-II Owner's Manual
...
Laney
Series monitors
MODEL : CP10-II CP12-II
CP15-II
CM10-II
CM12-II
CM15-II
USER MANUAL
Concept
THANK YOU
We at Laney are extremely pleased that you have decided to select a Concept product |
1 |
for your sound requirements and we wish to reinforce your judgement by ensuring you |
|
get off to a flying start by including this comprehensive user manual to assist you in |
getting to know your equipment.
Before switching on please read this manual carefully, since whilst you may well be an experienced user, no two brands are the same, and on reading this manual you will become aware of the subtle advantageous differences that Concept offers over its competitors.
UNPACKING
On unpacking your Concept please check carefully for any signs of damage that may have occurred whilst in transit from the Laney factory to your dealer. In the unlikely event that there has been damage, please repack your unit in its original carton and consult your dealer.
We would strongly advise you to store away your original transit carton, since in the unlikely event that some time in the future your unit should develop a fault, you will be able to return it to your dealer for rectification securely packed.
IMPORTANT SAFETY INFORMATION
Your Concept powered monitor should be fitted with a three pin 'grounded' (or 'earthed') plug. Please make sure that the moniter is powered from a 'grounded/earthed' outlet.
If changing or fitting a plug yourself, ensure that the applicable wiring code is adhered to, for example in the UK the cable colour code for connections are as follows:
EARTH OR GROUND |
|
GREEN/YELLOW |
||
NEUTRAL |
|
|
BLUE |
|
|
|
|||
LIVE |
|
|
BROWN |
|
|
|
|||
|
|
|
|
|
The Concept product should never be exposed to moisture or wetness under any circumstances, since this would represent a possible shock or fire hazard, and may cause expensive damage to your valuable possession.
In the unlikely event that a fuse should blow, it is imperative that you or your engineer use a correctly rated replacement.
Details of the fuse required is printed on the powered monitor - please take special care to use a 'time delay' fuse wherever stated.
CP Manual
Loading...