1
ENGLISH
CONTENTS
1) Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 2
2) Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
3) General description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4) Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5) Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
6) Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7) Installation and wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
8) Operation of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
9) Warnings regarding operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
10) Safety devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
11) Warnings regarding safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
12) Noise levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
13) Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
14) Cleaning the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2
1) FOREWORD
Read this manual from cover to cover before using the appliance as it contains
important instructions for the safety, operation and maintenance of the appliance.
Look after this manual and keep it in a safe place.
The manufacturer reserves the right to make changes to the product and to the
manual.
2) DIMENSIONS
A
B
C
D
H
Ø
mm
195
263
240
420
610
212
inches
7
3/4
10
1/2
9
1/2
16
1/2
24
8
1/4
SUPER JOLLY
GRINDER-DOSER
MAJOR
GRINDER-DOSER
ROBUR-ROYAL
GRINDER-DOSER
KON Y
GRINDER-DOSER
STARK
GRINDER-DOSER
A
B
C
D
H
Ø
mm
212
292
240
455
635
212
inches
8
1/4
11
1/2
9
1/2
18
25
8
1/4
A
B
C
D
H
Ø
mm
206
263
240
420
650
212
inches
8
10
1/4
9
1/2
16
1/2
25
1/2
8
1/4
A
B
C
H
Ø
mm
285
240
400
687
212
inches
11
1/4
9
1/2
15
3/4
27
8
1/4
A
B
C
H
Ø
mm
240
310
475
720
212
inches
9
1/2
12
1/4
18
3/4
28
1/4
8
1/4
A
C
A
C
H
A
Ø
B
D
Ø
H
B
D
Ø
H
B
C
C
A
Ø
H
B
DA
Ø
H
B
C
3
ENGLISH
3) GENERAL DESCRIPTION
4) PACKAGING
On opening the packaging, check carefully to make sure the appliance is intact and
that there are no signs of damage. If in any doubt, do not use the unit and contact
personnel with the appropriate professional skills.
The packaging materials must be kept out of the reach of children as they repre-
sent a potential source of danger.
Keep the packaging until the warranty has expired.
5) DISPOSAL
Do not litter: dispose of the packaging materials according to the laws in force.
Should you decide not to use the appliance any more, remember to unplug it so
that it cannot be used, and then cut the cable in the point where it comes out of
the appliance.
Contact specialized firms for information on the disposal of the components of the
appliance.
SUPER JOLLY MAJOR - KONY
ROBUR - ROYAL - STARK
HOPPER COVER
HOPPER (coffee bean container)
GRINDING ADJUSTMENT DISK
HANDLE
LOCKING SLIDE
HOPPER SAFETY SCREW
HOPPER FIXING PIN
COFFEE GRINDING ADJUSTMENT
DISK
PUSH BUTTON PANEL
FUNNEL (DOSER)
FILTER HOLDER FORK
SERIAL NUMBER LABEL
SWITCH
DRIP TRAY
1
2
3
4
5a
5b
6
7
8
9
10
11
12
4
6) USE
This appliance has been designed solely for grinding coffee beans.Any other use is
understood to be improper,and consequently hazardous.The manufacturer cannot
be held responsible for any damage as a result of improper or incorrect use.
Do not use the appliance for grinding other types of food, or anything else.
THE COFFEE GRINDERS AND COFFEE GRINDER-DOSERS MANUFACTURED
BY OUR COMPANY ARE INTENDED FOR SKILLED PERSONNEL ONLY FOR
PROFESSIONAL USE AND NOT FOR HOUSEHOLD USE.The user must be
an adult. Do not allow children or incapable persons to use the appliance.
7) INSTALLATION AND WIRING
The appliance must be installed by skilled technical personnel in conformity with
the safety rules in force. Incorrect installation may result in injury of persons or
animals, or damage to property, for which the manufacturer cannot be held
responsible.
•
The appliance must be placed on a stable, flat surface.
•
Before plugging in the appliance, make sure the voltage and frequency values of
the supply mains correspond to the ratings indicated on the label featuring the
appliance’s technical data.
•
The wall socket must be fitted with an efficient earth contact. Consequently, it
is essential to make sure the earth system is efficient and in conformity with
current safety rules.If in any doubt, have the system thoroughly checked by personnel with the appropriate professional skills.
IT IS COMPULSORY TO EARTH THE APPLIANCE.
The manufacturer cannot be held responsible in the event this regulation is not
complied with.
•
It is essential to make sure the ratings of the system are suitable for the power
absorbed by the appliance - as indicated on the label featuring the technical data
- and that the wall socket is protected against overcurrents.
•
Do not use extension cables, plug adapters for multiple sockets or makeshift
connections.
•
In EEC member countries, the regulation in force calls for the external equipotential terminal on the outer part of the appliance’s base plate to be connected
to a equipotential node if the installation is to be correct.
•
THE HOPPER MUST BE PLACED ON THE APPLIANCE AND