Page 1
linea mini installation guideline
waterdimensions
height 377mm
width 357mm
depth 530mm
weights
shipping weight 43kg
operating weight 30kg
power
voltage (VAC) 220-240V Single Phase
Standard Watts 1820
* suggested | † regulate as needed | ‡ this machine must be installed in accordance with the applicable federal, state and local
plumbing codes
specifications for plumb-in.
disregard if using the internal water reservoir.
water flow rate 2GPM
dynamic water pressure † 45PSI
min.pipe size diameter* 3/8 “
water connection* 3/8 ” male comp
water quality water kits are provided
with your machine
See water specifications
drainage
max. dist* 2.74 m
drain slope* ‡ 30mm per metre
counter hole diameter 65mm
Page 2
46mm
264mm
6
96.5mm91.5mm
79mm
310mm
89mm
30mm
2
160mm
135mm
1. centre line of the machine
5
3
284mm
2. position of the power cord
3. suggested diameter of counter hole: 65mm
4. position of the drain tube
5. position of the water inlet hose
6. width of legs per model
4
machine leg location
1
165mm
front view
top view
5
water specifications
La Marzocco recommends that your
filtration system produces water
with the following properties:
specifications for plumb-in.
disregard if using the internal
water reservoir.
6
4
1
3
7
2
T.D.S
Total Hardness
Total Iron
Free Chlorine
Total Chlorine
90 -150ppm
70-100ppm
0-0.02ppm
0-0.05ppm
0-0.1ppm
pH
Alkalinity
Chloride
Line Pressure
Flow Rate
1. 3/8” cold water supply
2. water filter required if plumbed
(not provided)
see water specifications below.
3.3/8” BSPP cold water supply
line suggested max. dist. from
water supply 203mm
4. 3/4” flexible drainline
(min. 3cm per metre slope)
5. sink drain above p-trap
6. 220V electrical supply
to grinder
7. 220-240V, electrical supply to
espresso machine (10 amp plug included)
6.5 - 8
40-80ppm
0-30ppm
45-80PSI
2 GPM or 8 LPM
for any queries please contact the tech team at home.australia@lamarzocco.com
Loading...