La Crosse Technology K84377 User Manual

Mounti n g Holder

LCD

Transparent Cover

Whi te Grips

Battery Holder

Temperature Sensor

Whi te Case

Adhes ive for mounting

IN/OUT Wi ndow Therm om e te r

Model K84377 | Instruction Manual

Features

• Easily read the current outdoor temperature from inside your home

• Maximum and Minimum temperature with auto reset (ºF)

• Weather resistant--can be used indoors or outdoors

• Demountable for window cleaning

Setup

1. Remove the mounting holder and transparent cover from the LCD.

2. Hold the white grips on the side of the LCD and carefully remove it
from the white case.

Note: Do not touch the LCD directly.

3. Remove the plastic safety strip, preventing the battery from making
contact. Insert the LR44 button cell battery with the

4. Remove the protective scratch guard from the LCD.

5. Set time and date (see program menu).

6. Slide the IN/OUT switch to select indoor or outdoor use.

7. Carefully put the LCD back into the white case (circuit board will face
the back, buttons will face the front).

8. Replace the transparent cover over the LCD. Press firmly to secure it
to the white case.

LCD Readings

Current Temperature: The upper LCD shows the current temperature in

large numbers.
MAX/MIN Readings: The lower LCD shows the maximum and minimum
temperature for the past 24 hours.

• The minimum temperature automatically resets at 8:00 P.M.

• The maximum temperature automatically resets at 8: 00 A.M.

• If the time is not set, the minimum and maximum temperatures will not

be reset at the correct local time or may read dashes (---).

+ side facing up.

Program Menu

1. Remove the mounting holder and transparent cover from the LCD.

2. Hold the white grips on the side of the LCD and carefully remove it
from the white case.

Note: Do not touch the LCD directly.

3. Hold the MODE button until the hours flash. Press and release the +
button to adjust the hours.

4. Press and release the MODE button and the minutes will flash. Press
and release the + button to adjust the minutes. Press the MODE button
to return to the temperature display.

Mounting

Indoor Use:

1. Remove the window thermometer from the mounting holder.

2. Clean and dry the area you choose to mount the window thermometer
so the adhesive will stick.

3. Remove the thin cover from the adhesive to reveal the sticky side.

4. Carefully place the mounting holder in the desired location with the
opening facing up.

5. Insert the window thermometer.

Outdoor Use:

1. Choose and outdoor window location that is fairly dry and shaded for
accurate readings.

2. Remove the window thermometer from the mounting holder.

3. Clean and dry the area you choose to mount the window thermometer
so the adhesive will stick.

4. Remove the thin cover from the adhesive to reveal the sticky side.

5. Carefully place the mounting holder in the desired location with the
opening facing up.

6. Insert the window thermometer.

Important

• Avoid direct sunshine as it will cause false high temperature readings.

• Constant direct sunlight may fade the LCD, making it difficult to read.

• Due to the heat emission and sheltered location of your window, the

temperature may read higher with a window mounted location then at a
free unsheltered location outside.

Battery Change

• Remove the mounting holder and transparent cover from the LCD.

• Hold the white grips on the side of the LCD and carefully pull it out of

the white case.

• Note: Do not touch the LCD directly.

• Carefully place a small flat screwdriver in the rectangular opening to

push the battery out.

• Install a fresh LR44 button cell battery with the

+ side facing up (button

side).

• Insert the battery carefully and completely to avoid damage to the
circuit board on the back.

• Set time and date (see program menu).

Care and Maintenance

• Do not pull or bend the window thermometer.

• When the LCD is weak, replace the battery.

• Do not expose the window thermometer to extreme temperature,

vibration or shock.

• Clean with a soft damp cloth. Do not use scouring agents.

• The window thermometer is not a toy. Keep it out of reach of children.

• The window thermometer is not to be used for medical purpose or for

public information; it is for home use only.

• The specifications of this window thermometer may change without
prior notice.

• Improper use will void the warranty.

Specifications

Measuring ranges: Outdoor: -13ºF to 158ºF
Indoor: 32ºF to 104ºF
Resolution: 0.2ºF
Battery: LR44

Warranty Information

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against
manufacturing defects in materials and workmanship.

This limited warranty begins on the original date of purchase, is valid only on products
purchased and used in North America and only to the original purchaser of this
product. To receive warranty service, the purchaser must contact La Crosse
Technology, Ltd for problem determination and service procedures. Warranty service
can only be performed by a La Crosse Technology, Ltd authorized service center.
The original dated bill of sale must be presented upon request as proof of purchase to
La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no
charge as stipulated herein, with new or reconditioned parts or products if found to be
defective during the limited warranty period specified above. All replaced parts and
products become the property of La Crosse Technology, Ltd and must be returned to
La Crosse Technology, Ltd.

Replacement parts and products assume the remaining original warranty, or ninety
(90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for
labor and materials for all repairs covered by this warranty. If necessary repairs are

not covered by this warranty, or if a product is examined which is not in need or repair,
you will be charged for the repairs or examination.

The owner must pay any shipping charges incurred in getting your La Crosse
Technology, Ltd product to a La Crosse Technology, Ltd authorized service center.

Your La Crosse Technology, Ltd warranty covers all defects in material and
workmanship with the following specified exceptions: (1) damage caused by accident,
unreasonable use or neglect (including the lack of reasonable and necessary
maintenance); (2) damage occurring during shipment (claims must be presented to
the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4)
damage resulting from failure to follow instructions contained in your owner’s manual;
(5) damage resulting from the performance of repairs or alterations by someone other
than an authorized La Crosse Technology, Ltd authorized service center; (6) units
used for other than home use (7) applications and uses that this product was not
intended or (8) the products inability to receive a signal due to any source of
interference.

This warranty covers only actual defects within the product itself, and does not cover
the cost of installation or removal from a fixed installation, normal set-up or
adjustments, claims based on misrepresentation by the seller or performance
variations resulting from installation-related circumstances.

LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR
INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES
ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT.
THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR
PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF
CHILDREN’S REACH.

This warranty gives you specific legal rights. You may also have other rights specific
to your State. Some States do no allow the exclusion of consequential or incidental
damages therefore the above exclusion of limitation may not apply to you.

For warranty work, technical support, or information contact:

La Crosse Technology, Ltd

2817 Losey Blvd. S.

La Crosse, WI 54601

Contact Support: 1-608-782-1610
Product Registration:

www.lacrossetechnology.com/support/register

On the Web:

www.lacrossetechnology.com/k84377

All rights reserved. This handbook must not be reproduced in any form, even in
excerpts, or duplicated or processed using electronic, mechanical or chemical
procedures without written permission of the publisher. This handbook may contain
mistakes and printing errors. The information in this handbook is regularly checked
and corrections made in the next issue. We accept no liability for techn i ca l mist a ke s
or printing errors, or their consequences. All trademarks and patents are
acknowledged.