Kyocera FS-C8600DN, FS-C8650DN SERVICEBULLETINS 2LC 0096 C246

(Page.1/2)

Subject

Change of the Wooden Skid* (1 Type -> 2 Types)

Except TA

Model l:

TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci,
TASKalfa 3050ci, TASKalfa 5500i, TASKalfa 4500i,
TASKalfa 3500i, FS-C8650DN, FS-C8600DN

KDC’s Classification Entire Stock Rework In-Field modification at next visit

In-Field modification by case No modification necessary

Field Measure:

No particular problem is expected. Please note the descriptions below.

Serial Nos. of the Affected Machines:

After using up the old stock (The serial number information will not be available.)

Differences

Old type

SKID

New type

SKID-A

New type

SKID-B

Leg size---4 legs

120 x 90

120 x 75

100 x 90

Length between legs
(long)

742 772

742

Length between legs
(short)

570 570

610

Bottom plate (long)
Width x Thickness

90 x 8

75 x 12

80 x 10

Bottom plate (short)
Width x Thickness

90 x 8

75 x 12

90 x 10

Service Bulletin Ref. No. 2LC-0096 (C246)

<Date> Sep 24, 2012

Topic

The wooden skid is now laid in from two vendors for procurement reason. (New skid: SKID-A and SKID-B described
below) As a result, there will be two types of wooden skid to be used. Therefore, please note that the hole for the
fork of the skid lifter slightly differs according to the skid type.

[Difference of the wooden SKIDs]

KYOCERA Document Solutions Europe

Technical Customer Service Division (TCSD)

(Unit: mm)

(Page.2/2)

(Old SKID)

(New: SKID-B)

Bottom plate
Width: 90 mm
Thickness: 10 mm

Bottom plate
Width: 80 mm
Thickness: 10 mm

Bottom plate
Width: 90 mm
Thickness: 8 mm

(New: SKID-A)

Bottom plate
Width: 75 mm
Thickness: 12 mm

Affixed a thin

100mm

120mm

90mm

742mm

100mm
120mm

75mm

772mm

570mm

570mm

610mm

100mm

100mm
90mm

742mm

(New

Service Bulletin Ref. No. 2LC-0096 (C246)

<Date> Sep 24, 2012

<Change of the leg size>

KYOCERA Document Solutions Europe

Technical Customer Service Division (TCSD)