Kyocera FS-C8600DN, FS-C8650DN SERVICEBULLETINS 2MN 0004 C223

(Page.1/2)

Subject

Notes on Replacement of the Parts
(Unification of the Operation Wire)

Model l:

FS-C8650DN, FS-C8600DN

No.

Old Part

No.

New Part

No.

Description

Q’

ty

Com

bi

pati­lity

Remarks

Old

New

Old

New

1

302MN46030

2MN46030

302MN46031

2MN46031

WIRE PANEL

1

1

X O *1

2

302MN94050

2MN94050

302MN94051

2MN94051

PARTS OPERATION UNIT SP

1

1

O

(*2) O (*2)

3

302MN46110

2MN46110

------------

+WIRE PANEL JOINT

1

-

X

-

Unified with the
new No.1

Connect

Connect with the
connector (YC1) on
the operation panel
PWB.

(Connecting part of the old wires (No.1 and No.3)

Connector
YC1 on the
panel PWB

Old WIRE PANEL (No.1)

Old WIRE PANEL JOINT (No.3)

Connect with the
connector (YC1) on the
operation panel PWB.

Service Bulletin Ref. No. 2MN-0004 (C223)

<Date> August 30, 2012

Topic

The WIRE PANEL JOINT (No.3) was abolished and unified into the new WIRE PANEL (No.1) for the easy wire
alignment.
Accordingly, some attention is required when installing the new operation unit (No.2) for service to the machine
before this change. Therefore, please refer to [Field Measures] below.

<WIRE PANEL JOINT (No.3): Wire length is 85 mm> <Old WIRE PANEL (No.1): Wire length is 900 mm>

<New WIRE PANEL (No.1): Wire length is 1000 mm>

[Machine without the right upper cover]

"+" mark at the beginning of the part name indicates that it is a component part.

*1: If replacing the old WIRE PANEL (No.1) with the new WIRE (No.1) in the machine before the changes, please remove the

WIREPANEL JOINT (No.3).
*2: If installing the old operation unit to the machine after the changes, please remove the unnecessary WIRE PANEL JOINT
(No.3).
If installing the new operation unit to the machine before the changes, please remove the WIRE PANEL JOINT (No.3) from the
operation unit in the machine and reconnect it with the panel PWB (Connector YC1) in the new operation unit.

KYOCERA Document Solutions Europe

Technical Customer Service Division (TCSD)

(Page.2/2)

KMC’s Classification Entire Stock Rework In-Field modification at next visit

In-Field modification by case No modification necessary

Field Measure:

Please remove the WIRE PANEL JOINT (No.3) from the current operation unit attached in the machine and
reconnect it with the panel PWB (Connector YC1) in the new operation unit when replacing the operation unit
in the machine before this change.

FS-C8650DN

KDA

KDA 220VI

KDE

UTAX

KDAU

KDAS

KDKR

1102MN2US0

1102MN4US0

1102MN3NL0

1102MN3UT0

1102MN3AS0

1102MN3AX0

1102MN3KR0

NXW2700034

NXZ Next

NXX2700178

L4F Next

NXY2700010

L462800001

L47 Next

FS-C8600DN

KDE

UTAX

1102N13NL0

1102N13UT0

NY22700186

L4G2700001

Service Bulletin Ref. No. 2MN-0004 (C223)

<Date> August 30, 2012

Serial Nos. of the Affected Machines

KYOCERA Document Solutions Europe

Technical Customer Service Division (TCSD)