Kyocera FS-C8020MFP, FS-8025MFP SERVICEBULLETINS 2KZ 0030 C209

(Page.1/3)

Subject

Firmware Upgrade (Upgrade Pack Ver. V6.00)

FS-6025MFP_FS-6030MFP_v06.00.0010_(2012-07-04)
FS-C8020MFP_FS-C8025MFP_v06.00.0010_(2012-07-04)

Model l:

FS-C8020MFP, FS-C8025MFP

1.

Measures against the F356 error

8.

New maintenance mode U486

2.

Handling of the setting [Send and Forward]

[Setting color/black and white operation mode].

3.

Measures against the F515 error

9.

Improvement of color tone change

4.

Measures against the margin operation failure

10.

Change of the initial setting in the U285

5.

Measures against the F248 error when using

[Setting service status page] for TA/UTAX only

the web driver

11.

Prevention of the fuser paper jam

6.

Correction to German translation

12.

Measures against the threshold value display

7.

Measures against the F124 error when scanning

failure of the original size detection in the U099.

13.

Measures against the C7103 service call error

Type

Program No.

Ver.

Remarks

Upgrade Pack Ver.

2KZ_V6.00E

6.00

MAIN

2KZ_2F00.005.020

->2KZ_2F00.006.004

006.004

New upgrade

MMI

2KZ_7000.005.016

005.016

ENGINE

2K0_1000.010.002

010.002

New upgrade

LANGUAGE BR

2KZ_81BR.001.012

001.012

LANGUAGE KR

2KZ_81KR.001.010

001.010

For KDKR *1

LANGUAGE CN

2KZ_81CN.001.011

001.011

For KDCN *1

LANGUAGE TW

2KZ_81TW.001.009

001.009

For KDTW *1

IO

2K0_1E00.001.020

001.020

IH

2LC_1A00.002.001

002.001

LSU

2K0_1C00.002.002

002.002

New upgrade

DP

3M8_9500.005.001

005.001

New upgrade

FAX BOOT/APL

<Deleted from the pack

for the main machine>

Refer to the enhance pack. *2

New upgrade

FAX BOOT/APL

<Deleted from the pack

for the main machine>

Refer to the enhance pack. *2

New upgrade

ESPECIAL

ES_SKIP.ON

----------

Service Bulletin Ref. No. 2KZ-0030 (C209)

<Date> August 8, 2012

Topic

The firmware was upgraded as follows.

Content of Changes

<For more details, please refer to the next pages.>

For the KD sales companies, it is possible to download the firmware at the download center on the Service World.
When upgrading the firmware or replacing a board, please upgrade all kinds of the firmware (MAIN, ENGINE, MMI) to the
latest version at the same time.

*1: This firmware is not included in the upgrade pack. Please individually download it at the download center.

*2: The upgrade pack for the enhancement unit has been informed by the service bulletin SB-2K3-0035-C199 which is the
latest one as of August 8, 2012. However, please check the latest service bulletin since the upgrade pack version may be
upgraded again. (It will be informed per as 2K3-****.)

KYOCERA Document Solutions Europe

Technical Customer Service Division (TCSD)

(Page.2/3)

(As of July 26,

2012)

Current Ver.

FS-C8020MFP,

FS-C8025MFP

FS-C8525MFP, FS- C8520MFP

Informed usable version

ENGINE

2K0_1000.010.002

O

X

2K0_1000.009.016

KDC’s Classification Entire Stock Rework In-Field modification at next visit

In-Field modification by case No modification necessary

Field Measure: Please upgrade the firmware when the phenomenon described above occurs.

Serial Nos. of the Affected Machines: From the July 2012 production

No.

Item

Details

CTL

MAIN firmware Ver.005.020

Change at production line

The command for checking the board was changed in order to improve the
productivity.

639435

MAIN firmware Ver.006.004

1

Measures against the F356
error

The F356 system error might appear after completing transmission of network
fax with simultaneous print function from the network user. Therefore, this was
corrected.

634157

2

Handling of the setting [Send
and forward]

The destination of [Send and Forward] might be indicated on the status of
transmission job when [Send and Forward] was set. Therefore, this was
corrected so that they will not be indicated.

624974
662105

3

Measures against the F515
error

The F515 system error might appear if the start key was pressed
immediately after setting the A3 size original on the DP when the combine 4
in 1 and A5 size paper were selected. Therefore, this was corrected.
(This error appears when misalignment occurs depending on the detection
timing of original size.)

589400

4

Measures against the "Margin"
operation failure

"Margin" in copy function did not function if "Auto Image Rotation" was set to
"OFF". Therefore, this was corrected.

TO-11-092

616408

5

Measures against the F248
error when using the web
driver

The F248 error might appear when performing a print job after setting the
machine not by the auto recognition of the installing model, but by inputting
the IP address using the web driver (UPD: Universal Printing Driver).
Therefore, this was corrected.

TP-12-048

TA-S12-010

597171

6

Correction to German
translation

The following strings in German were corrected.

- (Wrong) "Install" --> (Correct) "Installiert"

- (Wrong) "Keine Anwort" --> (Correct) "Keine Antwort"

TO-12-046

TA-S12-018

- (Wrong) "Universalzuführ" --> (Correct) "Universalzufuhr"

- (Wrong) "Prüfen" --> (Correct) "Qualität"

- (Wrong) "Druckvorgang läuft" --> (Correct) "Drucken"

TO-12-036

640194
640170

7

Measures against the F124
error when scanning

The F124 system error might appear during original scanning if pressing the
start key from the sending screen after calling up the function from the
registered program. Therefore, this was corrected.

595198
593457

Service Bulletin Ref. No. 2KZ-0030 (C209)

<Date> August 8, 2012

NOTICE: This engine firmware version is not yet confirmed for other models. Please do not use it for the following models.

Content of Changes

X: Please do not use the current version, but the version informed before as usable.

KYOCERA Document Solutions Europe

Technical Customer Service Division (TCSD)