Kyocera FS-C8020MFP, FS-8025MFP SERVICEBULLETINS 2KZ 0021 B456

Q’
Com
bi
p
ati-
This side up
37.5
36.5
Service Bulletin Ref. No.
Subject
(Page.1/2)
2KZ-0021 (B456)
<Date> December 28, 2011
Measures against the “Cover Open” Message Failure (Improvement of the Margin for the Front Cover Safety Switch Detection)
Model
FS-C8020MFP, FS-C8025MFP
Topic
“The cover is open. Close the front cover” message might not disappear even after the front cover was closed. Therefore, the following changes were made in order to improve the margin for the front cover safety switch detection.
Content of Changes
The shape of the HOLDER SW was changed to increase the margin for the switch pusher rod depth.
1. The length of the lever from the front cover part to the leading edge of the lever was extended by 1 mm.
2. The shape of the leading edge of the lever was changed. The shape was changed from the round shape to flattened one to minimize the variation of the push rod dept at the leading edge of the lever during the up-and-down motion of the lever.
HOLDER SW
Old
Round
No.
*1: This part was registered as a service part this time.
Old Part
No.
302K094060
1
2K094060
302K094360
2
2K094360
302K094450
3
2K094450
302K094470
4
2K094470
302K094600
5
2K094600
302K094610
6
2K094610
302KZ94010
7
2KZ94010
302KZ94020
8
2KZ94020
302KZ94030
9
2KZ94030
302KZ94050
10
2KZ94050
302KZ94060
11
2KZ94060
12 --------
Flattened
New Part
No.
302K094061
2K094061
302K094361
2K094361
302K094451
2K094451
302K094471
2K094471
302K094601
2K094601
302K094611
2K094611
302KZ94011
2KZ94011
302KZ94021
2KZ94021
302KZ94031
2KZ94031
302KZ94051
2KZ94051
302KZ94061
2KZ94061
302K004350
2K004350
Old New
New
Lever
Description
PARTS COVER FRONT ASSY 25 E SP
PARTS COVER FRONT ASSY 25 J/A SP
PARTS COVER FRONT ASSY 25 CS SP
PARTS COVER FRONT ASSY 25 LV SP
PARTS COVER FRONT ASSY UT SP
PARTS COVER FRONT ASSY 25 KS SP
PARTS COVER FRONT ASSY 20 E SP
PARTS COVER FRONT ASSY 20 J/A SP
PARTS COVER FRONT ASSY 20 CS SP
PARTS COVER FRONT ASSY 20 LV SP
PARTS COVER FRONT ASSY 20 KS SP
+HOLDER SWITCH - 1 - O *1
European Service & Development Center (ESDC)
ty
Old New Old New
1 1 X O
1 1 X O *1
1 1 X O
1 1 X O
1 1 X O
1 1 X O
1 1 X O
1 1 X O
1 1 X O
1 1 X O
1 1 X O
lity
Remarks
Service Bulletin Ref. No.
KMC’s Classification Entire Stock Rework In-Field modification at next visit
Field Measure:
Please replace the part No.12 with the new one when the phenomenon described above arises.
Serial Nos. of the Affected Machines: Planned from the December 2011* production
(Page.2/2)
2KZ-0021 (B456)
<Date> December 28, 2011
In-Field modification by case No modification necessary
*The above is the plan at the present moment. Please note that this information is subject to change.
European Service & Development Center (ESDC)
Loading...