Kyocera FS-C8020MFP, FS-8025MFP SERVICEBULLETINS 2KZ-003

Service Bulletin

SB Number:

Subject:

SB 2KZ-003

The Wire cover and Base conveying have been changed

Creation Date: 24/08/2011

Model: FS-C8020MFP/8025MFP

Contents of changes

To make it easier to remove the Wire cover, the shape of the Base conveying and the Wire cover have been
changed. Due to the change of the Wire cover, the spacer has not been attached to the latest type of the Parts
cover right assy SP.
To ensure compatibility when replacing the parts, the spacer and caution leaet have been bundled with the latest
type of the Parts cover right assy SP (Caution leaet only in the case of the latest type of the Parts conveying
unit).

The shape of the Base conveying has been changed

The shape of the Wire cover has been changed

Parts

No. Old Parts

No.

1 302K094030

2K094030

2 302K094020

2K094020

Part notes: *1. Bundled with a spacer and the caution leaet.
*2. Bundled with the caution leaet)

Classication

Field measure Please refer to the caution leaet, when replacing the parts.

Serial numbers of affected machines

Type Serial number

FS-C8020MFP/8025MFP June 2011 production

The above mentioned changes have been applied to machines produced after the above mentioned production date.

New Parts
No.

302K094031
2K094031

302K094021
2K094021

Entire stock rework

Description Q’TY Interchange-

ability

Old New Old New

PARTS COVER RIGHT ASSY SP (*1) 1 1 X O

PARTS CONVEYING UNIT SP (*2) 1 1 X O

In-eld modication at next visit

In-eld modication by case

X

No modication necessary

KMIS Service Department, Kyocera Mita Europe B217 / SB 2KZ-003

Page 1 of 3

Service Bulletin

The shape of the Base conveying has been changed.

Base conveying

Old condition New condition

New condition: A hook has been added to prevent the Wire cover from

disengaging. The cover has been extended to cover the connector. Therefore
the sheet is no longer neccessary and has been discontinued.

The shape of the Wire cover has been changed.

Old condition of the Wire cover

Sheet

Wire cover

Cover right assy

New condition of the Wire cover

Added rib

Hook to latch rear cover

The cover has

been extended

Hook to latch rear side plate

Added rib and the spacer to the Cover
right assy has been discontinued

Cover right assy

The spacer has been discontinued

KMIS Service Department, Kyocera Mita Europe B217 / SB 2KZ-003

Page 2 of 3