Kyocera FS-C5150, FS-C2026, FS-5250, FS-2126MFP ServiceBulletin 2KT-003
Service Bulletin
SB Number:
Subject:
SB 2KT-003
Toner container shutter open/close capability improvement
Creation Date: 18/05/2011
Model: FS-C5150DN/5250DN, FS-C2026MFP/2126MFP
Content of changes
The following changes have been made to improve the open and close capability of the Toner container:
1. Tension of the Spring joint shutter has been improved, to increase the interlocking force for the joint between
the Toner container and the Holder joint.
Holder joint assy
Holder joint assy
Spring joint shutter
2. The shape of the Shutter container has been changed, to reduce backlash at the joint of the Shutter container
and to ensure proper open and close capability of the Toner container shutter.
Toner container
3. A projection has been added to the Shutter container to recognize the latest type of the Toner container.
Shutter container
Thickened by 0.45mm
Added projection
KMIS Service Department, Kyocera Mita Europe B107 / SB 2KT-003
Page 1 of 2
Service Bulletin
Classication
Field measure When the message “The toner container is improperly installed” is displayed after installing the
Serial numbers of affected machines
Type Serial number
FS-C5150DN/5250DN, FS-C2026MFP/2126MFP March 2011 production.
The above mentioned changes have been applied to machines produced after the above mentioned production date.
Entire stock rework
toner container, please follow the instructions according to Service Bulletin 2KT-002.
In-eld modication at next visit
In-eld modication by case
No modication necessary
X
KMIS Service Department, Kyocera Mita Europe B107 / SB 2KT-003
Page 2 of 2
Loading...