Kyocera FS-C5150, FS-C2026, FS-5250, FS-2126MFP ServiceBulletin 2KW-0026-B107 1

was

increased

.

Subject

(Revised issue 1)

Service Bulletin Ref. No.

2KW-0026 (B107)

<Date> March 8, 2012

Improvement of the Opening and Closing Performance of the
Toner Container Shutter

(Page.1/3)

Model

This time, the description with (-->) was revised from the previous information.

<Number of changes: 2> The serial numbers of the affected models were added.

FS-C5150DN, FS-C5250DN, FS-C2026MFP, FS-C2126MFP

Topic

The following changes were made in order to secure the margin for opening and closing abilities for the toner
container shutter.

Content of Changes

1. Change of the toner container holder section on the main unit side
The tension of the SPRING JOINT SHUTTER was increased which is a component of the HOLDER JOINT
ASSY in order to increase the fitting force for the joint between the toner container and the HOLDER JOINT on
the main unit side.

2. Change of the toner container shutter

The shape of the SHUTTER CONTAINER was changed in order to reduce the backlash at the joint of the

SHUTTER CONTAINER and to secure the margin for opening and closing capabilities for the toner container
shutter.

Toner container

A →

HOLDER JOINT ASSY

A: Enlarged

SHUTTER CONTAINER

Component of the HOLDER
JOINT ASSY: Tension of the
SPRING JOINT SHUTTER

Thickened by 0.45 mm

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.

(Revised issue 1)

Service Bulletin Ref. No.

3. Distinction

A projection was applied to the SHUTTER CONTAINER so that the improved toner container can be easily
recognized.
Marking on SHUTTER CONTAINER

T: FS-C5150DN; V: FS-C2026MFP, FS-C2126MFP and FS-C5250DN

KMC’s Classification

Field Measure: Please refer to the service bulletin SB-2KW-0024-B081 for the corrective action in case that

Serial Nos. of the Affected Machines: Please refer to the table below.

Entire Stock Rework In-Field modification at next visit

the message “Toner container is improperly installed” appears after a new toner container
was installed.

Projection

*No service part was registered due to this change.

In-Field modification by case No modification necessary

2KW-0026 (B107)

<Date> March 8, 2012

(Page.2/3)

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.