Kyocera FS-6525, FS-6530MFP Service Bulletin 2MW 0004 C227
(Page.1/2)
Subject
Firmware Upgrade (Upgrade Pack Ver.V3.00)
FS-6525MFP_FS-6530MFP_v.03.00.0010_(2012-08-01)
Model l:
FS-6530MFP, FS-6525MFP
Type
Program No.
Ver.
Remarks
Upgrade Pack Ver.
2MW_V3.00E
MAIN
2MW_2F00.002.007
-> 003.007
003.007
*2
New Upgrade
MMI
2MY_7000.003.005
003.005
New Upgrade
ENGINE
2K3_1000.008.012
008.012
LANGUAGE BR
2MY_81BR.001.012
001.012
New Upgrade
LANGUAGE CN
2MY_81CN.001.006
001.006
For KDCN *1 *2
New Upgrade
LANGUAGE KR
2MY_81KR.001.005
001.005
For KDKR *1 *2
New Upgrade
LANGUAGE TW
2MY_81TW.001.005
001.005
For KDTW *1 *2
New Upgrade
BROWSER
2M8_F000.001.002
001.002
IO
2K3_1E00.001.010
001.010
DP
3M8_9500.005.001
005.001
ESPECIAL
ES_SKIP.ON
----------
Service Bulletin Ref. No. 2MW-0004 (C227)
<Date> August 23, 2012
Topic
The firmware was upgraded as follows.
Content of Changes
<MAIN: 2MW_2F00.002.007>
1. Measures against the unavailable port specified with the HyPAS application
<Firmware upgrade>
2. Change of the initial setting in the U285 [Setting service status page] for TA/UTAX only
3. New route certificate for Cloud Connect
4. Correction to German translation
5. Handling of the setting [Send and Forward]
6. Measures against the print failure when continuously printing using the KX Driver
7. Measures against the F245 system error when receiving a certain mail
8. Measures against the output failure of the file for which the number of copies was specified with AS400
9. Measures against the indication failure of the cassettes (500x2) on the status page
[In case if Korea/Taiwan/China are set as the destination and language]
(For more details, please refer to next page.)
For the KD sales companies, it is possible to download the firmware at the download center on the Service World.
When upgrading the firmware or replacing a board, please upgrade all kinds of the firmware (MAIN, ENGINE, MMI) to the latest
version at the same time.
*1: This firmware is not included in the upgrade pack. Please individually download it from the download center.
*2: Under the following NG firmware combination, the F245 system error appears if outputting the status page with affected
language set. Please use each firmware with the combination of the latest firmware after this version.
NG combination: New MAIN firmware (003.007 or later) <-> Old LANGUAGE firmware (BR: Older than Ver.001.012; CN: Older
than Ver.001.006; KR/TW: Older than Ver.001.005)
(*) The upgrade pack for the enhancement unit has been informed by the service bulletin SB-2K3-0035-C199. (The latest
ENHANCE Pack Version is V1.1 as of August 22, 2012.) However, please check the latest service bulletin because the
upgrade pack version may be upgraded afterwards. (It will be informed by service bulletin with SB-2K3-****.)
KYOCERA Document Solutions Europe
Technical Customer Service Division (TCSD)
(Page.2/2)
KDC’s Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please upgrade the firmware when the phenomenon described above occurs.
Serial Nos. of the Affected Machines: Planned from the August 2012* production
* The above is the plan at the present moment. Please note that this information is subject to change.
No.
Item
Details
CTL
MAIN: 2MW_2F00.002.007
1
Measures against the unavailable
port specified with the HyPAS
application
The port number usable with HyPAS application was 1-32767. Therefore,
this was corrected to 1-49150.
645160
TO-12-090
Firmware upgrade this time
2
Change of the initial setting in the
U285 [Setting service status page]
for TA/UTAX only
The initial setting in the U285 was changed from OFF to ON for TA/UTAX
only. Due to this change, the print coverage data will be indicated on the
service status page.
662209
3
New route certificate for Cloud
Connect
----------
662556
4
Correction to German translation
The following strings in German were corrected.
- (Wrong) "Install" --> (Correct) "Installiert"
- (Wrong) "Keine Anwort" --> (Correct) "Keine Antwort"
- (Wrong) "Universalzuführ" --> (Correct) "Universalzufuhr"
- (Wrong) "prüfen." --> (Correct) "Qualität"
- (Wrong) "Druckvorgang läuft" --> (Correct) "Drucken"
629784
TO-12-046,
TA-S12-018
TO-12-036
#1420534,
640194
640170
5
Handling of the setting [Send and
Forward]
The change was made so that the destination of [Send and Forward] will
not be indicated on the status of the sending job when [Send and
Forward] is set.
647490
6
Measures against the print failure
when continuously printing using
the KX Driver
When some document files were selected and continuously printed out
using the KX Driver, unexpected number of copies might be printed out.
Therefore, this was corrected.
(No particular problem is expected when outputting single file.)
599358
TP-12-058,
#1433281
7
Measures against the F245
system error when receiving a
certain mail
1) The F245 system error might appear when receiving a certain mail
which is not in the normal form. Therefore, this was corrected.
726179
TP-12-154
NP-Z12040
2) The F245 system error might appear when receiving a certain mail with
unexpected header character string. Therefore, this was corrected.
726195
TO-12-086,
8
Measures against the output
failure of the file for which the
number of copies was specified
with AS400
If the number of copies was specified with AS400, the correct number of
the files might not be output. Therefore, this was corrected.
726067
TP-12-051
NP-Z12018
9
Measures against the indication
failure of the cassettes (500x2)
on the status page
[In case if Korea/Taiwan/China
are set as the destination and
language]
Although two layer cassettes were installed, (500x2) they might not be
indicated at the Paper Feeder on the status page. Therefore, this was
corrected.
649024
Service Bulletin Ref. No. 2MW-0004 (C227)
Content of Changes
<Date> August 23, 2012
KYOCERA Document Solutions Europe
Technical Customer Service Division (TCSD)
Loading...