Kyocera FS-6525, FS-6530MFP Service Bulletin 2MW-001
Service Bulletin
Page 1/1
C130 / SB 2MW-001
SB Number:
SB 2MW-001
Creation Date: 14/06/2012
LSU has been changed (Assembly process/Electrical noise
Subject:
resistance)
Model: FS-6525MFP/6530MFP
Contents of changes
To improve the assembly process and to increase the resistance against electrical noise, the LSU has been changed
as follows:
1. The APC PWB has been changed.
2. Due to the above mentioned change, the ferrite core (A) and conductive clamp (B) are no longer necessary and
have been discontinued.
3. Wire (C and D) have been changed.
LSU
Old condition
Discontinued
conductive
clamp (B)
Discontinued
ferrite core (A)
APC PWB
Old type of
the wire (C)
Old type of
the wire (D)
New condition
APC PWB
New type of
the wire (C)
New type of
the wire (D)
Parts
No. Old Parts
No.
1 302K393071
2K393071
Classication
Field measure When replacing the LSU, use the latest type. If the latest type of the LSU is installed in machines
New Parts
No.
302K393072
2K393072
Entire stock rework
with the ferrite core and conductive clamp, do not remove these parts.
Description Q’TY Interchange-
LK-475 1 1 X O
In-eld modication at next visit
In-eld modication by case
X
ability
Old New Old New
No modication necessary
KDIS Service Department, KYOCERA Document Solutions Europe B.V.
Loading...