Kyocera FS-6025, FS-6030MFP Service Bulletin 2K3 0012 B137
Handling of
Main
unit rel
ated maintenance mode
s
printing function
o
riginal on the contact glass
U429
Setting the offset for the color balance
Subject
Model
Service Bulletin Ref. No.
2K3-0012 (B137)
[Service Information]
Notes on the Replacement of the Main Board (
C0180 Error)
FS-6030MFP, FS-6025MFP, FS-6025MFP/B, FS-C8020MFP,
FS-C8025MFP
<Date> May 20, 2011
(Page.1/2)
Topic
Since no HDD is equipped on the models listed above, some data is saved on the main board instead.
Therefore, the following operations are required when the main board was replaced.
1. Execute the maintenance mode U004 to resolve machine number mismatch which appears after main board was
replaced.
2. Adjust the scanner image.
1) Input the value in the auto scanner adjustment chart in the maintenance mode U425.
2) Execute the maintenance mode U411 by applying the auto scanner adjustment chart.
3) Execute [Halftone adjustment] from the system menu.
3. Reactivate the license for the optional product(s) if any installed.
1) Reactivate the ID CARD AUTHENTICATION KIT B).
2) Register the ID card again in the maintenance mode U222.
4. Import data in the maintenance mode U917 if any was exported from the machine before the main board was
replaced. (The export and import can be also performed via KM-Net Viewer.)
5. Register the initial user settings and FAX settings from the system menu or the Command Center.
6. Execute the maintenance mode as follows if necessary.
No.
U250
U251
U253
U260 Selecting the timing for copy counting
U326 Setting the black line cleaning indication
U341
U343
U345
U402 Adjusting margins of image printing
U403
U404
U407
U425 Setting the target
U432 Setting the center offset for the exposure
U470 Setting the JPEG compression ratio
Checking/clearing the maintenance
cycle
Checking/clearing the maintenance
counter
Switching between double and single
counts
Specific paper feed location setting for
Switching between duplex/simplex copy
mode
Setting the value for maintenance due
indication
Adjusting margins for scanning an
Adjusting margins for scanning an
original from the DP
Adjusting the leading edge registration
for memory image printing
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)
No. Fax related maintenance modes
U603 Setting user data 1
U604 Setting user data 2
U610 Setting system 1
U611 Setting system 2
U612 Setting system 3
U615 Setting system 6
U625 Setting the transmission system 1
U695 FAX function customize
Service Bulletin Ref. No.
KMC’s Classification Entire Stock Rework In-Field modification at next visit
Field Measure: Please perform the operations described above when the main board was replaced.
Serial Nos. of the Affected Machines: This is only service information and will not affect the production.
[Service Information]
In-Field modification by case No modification necessary
(Page.2/2)
2K3-0012 (B137)
<Date> May 20, 2011
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.
Loading...