Kyocera FS-6025, FS-6030MFP Service Bulletin 2K3 0023 B358

FS-6025MFP_FS

-

6030MFP_v04.00.0020_(2011

-09-

22)

Service Bulletin Ref. No.

Subject

(Page.1/1)

2K3-0023 (B358)

<Date> October 17, 2011

Firmware Upgrade (Upgrade Pack Ver. V4.01)
(Main: Ver. 004.022, etc.)

Model

FS-6030MFP, FS-6025MFP, FS-6025MFP/B

Topic

The firmware was upgraded as follows.

Content of Changes

No. Item Details

1 Measures against the image

dropout with a certain file
and when GDI compatible
mode is ON

2 Measures against the

massage display failure
when cancelling the direct
transmission

Type Program No. Ver. Remarks

Upgrade Pack Ver. 2K3_V4.01E 4.01

MAIN 2K3_2F00.004.022 004.022
MMI 2K3_7000.004.023 004.023
ENGINE 2K3_1000.006.001 006.001

LANGUAGE BR 2K3_81BR.001.009 001.009
LANGUAGE KR 2K3_81KR.001.006 001.006 For KMKR *2
LANGUAGE CN 2K3_81CN.001.008 001.008 For KTST *2
LANGUAGE TW 2K3_81TW.001.005 001.005 For KMTW *2
IO 2K3_1E00.001.010 001.010

DP 3M8_9500.004.001 004.001

FAX BOOT/APL 5JR_5500.B04.003 B04.003 Except KTST *1 (APL B04.003)

FAX BOOT/APL 5JR_5700.Z04.002 Z04.002 For KTST *1*2 (APL Z04.002)

ESPECIAL ES_SKIP.ON ----------

For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net.
When upgrading the firmware or replacing a board, please upgrade all kinds of the firmware to the latest version at the same
time.

*1: BOOT (B02.001)
*2: This firmware is not included in the upgrade pack. Please individually download it from the download center on the
ESDC.net.

KMC’s Classification Entire Stock Rework In-Field modification at next visit

Field Measure: Please upgrade the firmware when the problem described above arises.

Serial Nos. of the Affected Machines: Planned from the October 2011* production

Only approx. 5 mm from the leading edge of image was printed with a
certain file when the GDI compatible mode was enabled in the KX driver.
Therefore, this was corrected.

The FAX main message remains “Waiting” even if the direct transmission
was cancelled. Therefore, this was corrected so that “Ready to directly
transmit FAX” will be displayed after cancellation.

←←←← New upgrade

←←←← New upgrade

In-Field modification by case No modification necessary

CTL.

572194

NP-Z11045

573538
573537

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.