Kyocera FS-6025, FS-6030MFP Service Bulletin 2MV 0001 C130 1
* A to D
above
are not for field supply.
New type
New type
Service Bulletin Ref. No.
(Revised Issue 1)
2MW-0001 (C130)
<Date> July 12, 2012
Subject Notes on Replacement of the Parts (Change of the LSU)
(Page.1/2)
Model
This time, the description with (-->) was revised from the previous information.
<Number of changes: 1> The accurate serial numbers were added (page 2).
FS-6525MFP, FS-6530MFP
Topic
The APC PWB for the LSU was changed in order to improve the assembly process.
Accordingly, some attention is required when replacing the parts. Therefore, please refer to [Field Measures] below.
Content of Changes
1) The APC PWB for the LSU (No.1, 2) was changed in order to improve noise resistance.
2) The noise resistance parts (the ferrite core (A in the figure below) and the conductive clamp (B)) were abolished
as they became unnecessary after the change 1) above. Additionally, the wires (C, D) were changed.
LSU (No.1, 2)
(Old)
B: Conductive clamp --- Disused
(New)
Old type LSU (No.1, 2)
A: Ferrite core --- Disused
New type LSU (No.1, 2)
Old type wire(C)
Old type wire (D)
APC PWB
APC PWB
wire (C)
wire (D)
KYOCERA Document Solutions Europe
Technical Customer Service Division (TCSD)
Q’
Com
bi
p
ati-
1st production
production
Planned from the 1st
production
Service Bulletin Ref. No.
(Revised Issue 1)
(Page.2/2)
2MW-0001 (C130)
<Date> July 12, 2012
No.
1
2
Old Part
No.
302K393071
2K393071
302K39K071
2K39K071
New Part
No.
302K393072
2K393072
302K39K072
2K39K072
Description
LK-475 1 1
LK-475(KR) 1 1
ty
Old New Old New
lity
X O
X O
Remarks
Except KDKR
For KDKR
KDC’s Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure:
Please use the new type LSU (No.1, 2) when replacing the LSU for the machine after this change.
(The noise resistance margins will not be secured if the old type LSU is installed on the machine without the
noise resistance parts.) The new type LSU can be installed on the machine before this change. (Do not
remove the noise resistance parts such as ferrite core and conductive clamp.)
Serial Nos. of the Affected Machines: (-->) Please refer to the tables below.
(-->)
Serial Nos. of the Affected Machines
FS-6530MFP
KDA CPY KDA 220VI KDBR KDE KDAU
1102MW2US0 1102MW2CS0 1102MW4US0 1102MW2BR0 1102MW3NL0 1102MW3AS0
NWV2600090
Planned from the
Planned from the 1st
1st production NWX2600377 NWW2600023
FS-6525MFP
KDA CPY KDA 220VI KDBR KDE KDAU
1102MX2US0 1102MX2CS0 1102MX4US0 1102MX2BR0 1102MX3NL0 1102MX3AS0
NWZ2600324
NXH2600021 1st production NX42501025 NX22600051
KYOCERA Document Solutions Europe
Technical Customer Service Division (TCSD)
Loading...