Kyocera FS-6025, FS-6030MFP Service Bulletin 2K3 011

Service Bulletin

SB Number:

Subject:

SB 2K3-011

Firmware upgrade (Firmware pack 4.01 and 4.02)

Creation Date: 11/11/2011

Model: FS-6025MFP/6025MFP(B)/6030MFP, FS-C8020MFP/8025MFP

Item Contents

1 Background on the

image (Only for the

FS-C8020MFP/ 8025MFP)

2 Image drop out in GDI

compatible mode.

3 The message when FAX

transmission is canceled has been changed.

4 Calibration failure (Only

for the FS-C8020MFP/ 8025MFP)

Phenomenon Background image may occur on the print-out, in high temperature/humid environments.

Solution

1. The environmental adjustment has been changed.

2. The main charge adjustment of the drive time has been changed.

Only 5mm of the leading edge of the image may be printed, when enabling the GDI compatible mode at the KX driver.

The message “Waiting“ may be displayed continuously, when canceling direct FAX

transmission. The message has been changed to “Ready to directly transmit FAX“, which should appear after canceling FAX transmission. (Only for the FS-6025MFP/6025MFP(B)/6030MFP)

Calibration may not be performed, after the machine recovers from sleep mode.

Firmware

Type Program No. Version Applicable model(s)

Upgrade Pack Ver. 2K3_V4.01E 4.01 FS-6025MFP/6025MFP(B)/

MAIN 2K3_2F00.004.022 004.022

MMI 2K3_7000.004.023 004.023

ENGINE 2K3_1000.006.001 006.001

IO 2K3_1E00.001.010 001.010

DP 3M8_9500.004.001 004.001

FAX BOOT/APL * 5JR_5500.B04.003 B04.003

Type Program No. Version FS-C8020MFP/8025MFP)

Upgrade Pack Ver. 2KZ_V4.02E 4.02

MAIN 2KZ_2F00.004.022 004.022

MMI 2KZ_7000.004.023 004.023

ENGINE 2K0_1000.007.003 007.003

IO 2K0_1E00.001.020 001.020

IH 2LC_1A00.002.001 002.001

LSU 2K0_1C00.001.012 001.012

DP 3M8_9500.004.001 004.001

FAX BOOT/APL* 5JR_5500.B04.003 B04.003

ESPECIAL ES_SKIP.ON ----------

6030MFP

Firmware notes *: BOOT: Z02.001 / APL B04.003

KMIS Service Department, Kyocera Mita Europe B357-B358 / SB 2K3-011

Page 1 of 2

Service Bulletin

Classication

Field measure Please upgrade the rmware to the latest version to implement the above mentioned changes.

Serial numbers of affected machines

Type Serial number

FS-6025MFP/6025MFP/B/6030MFP, FS-C8020MFP/8025MFP October 2011 production.

The above mentioned changes have been applied to machines produced after the above mentioned production date.

Entire stock rework

In-eld modication at next visit

In-eld modication by case

No modication necessary

KMIS Service Department, Kyocera Mita Europe B357-B358 / SB 2K3-011

Page 2 of 2