Kyocera FS-6025, FS-6030MFP Service Bulletin 2K3 0021 B322

Service Bulletin Ref. No.

Subject

(Page.1/2)

2K3-0021 (B322)

<Date> October 3, 2011

CD-ROM Upgrade (VER. 2.0) (KM Version Changed to DVD)

･･･

･･･KM Version* and UTAX/TA Version

･･････

Model

FS-6030MFP, FS-6025MFP, FS6025MFP/B

*KM version does not include the KME version.

Topic

The CD-ROM (Product Library) and the bundled printed matters were changed as follows.

A. KM version* CD-ROM VER. 1.4 -> DVD VER. 2.0 B. UTAX/TA version CD-ROM VER. 1.2 -> CD-ROM VER. 2.0 C. Revision of the Quick Installation Guide (bundled)

[Changes of A and B: CD/DVD]

No. Item Details

1 Change from CD-ROM to DVD

(KM version only) (Except KME and UTAX/TA)

2 Upgrade of the KX Driver

5.2.1327d

3 Deletion of the XPS-mini driver The KPX-mini driver was deleted since it is no more supported.

4 Upgrade of the KPDL mini-driver

8.4 [08-01-2011]

5 Upgrade of Mac PPD

10.5 and higher

10.4 and lower

6 TWAIN 1.8.1928

KM-Net for Direct Printing

2.4.1314

7 Upgrade of the KM-Net Viewer

8 File Management Utility

9 Revision of the Operation Guide a. The descriptions on the CD-ROM were changed to the ones on the

C. Revision of the Quick Installation Guide (bundled)

- (Same as No.9 above) The changes a. b. and c were implemented.

8.4 [08-01-2011]

5.3.1922c

2.0.0729

Two kinds of CD-ROMs were used depending on the destination. They are now incorporated in one DVD for common use.

CD-ROM VER. 1.4  DVD VER. 2.0

It was upgraded to the latest version.

- When selecting Finisher (Face Down) in the device option, rotation/sort is now disabled same as in the KX driver.

- When selecting rotated sort, Staple and Offset are now disabled.

Some changes were made to make the operability closer to the KX

Driver.

Main changes) – Implementation of the Job Settings function

- Implementation of the Job accounting function

- Implementation of the Cover mode/Transparency

interleave/Page insert functions

- Implementation of the watermark function

- Implementation of the User Login function, etc.

When installing in Portuguese, installation might rarely fail. Therefore, this was corrected.

- Printer driver installation to the PC on the network is now supported.

- The MFP supporting HyPAS application can be now managed. (To

install or to uninstall is now enabled.) File Management Utility was newly implemented.

DVD (except UTAX/TA version). b. The article of [Loading Paper] was deleted from the Quick Setup Wizard. (The change in the CD-ROM of the previous version was reflected.)

c. The File Management Utility Operation Guide was added.

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.

CTL

- -

517363

517413

518883

- -

Service Bulletin Ref. No.

KMC’s Classification Entire Stock Rework In-Field modification at next visit

Field Measure: No particular problem is expected.

Serial Nos. of the Affected Machines: After using up the old stock

(Page.2/2)

2K3-0021 (B322)

<Date> October 3, 2011

In-Field modification by case No modification necessary

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.