Kyocera FS-6025, FS-6030MFP Service Bulletin 5JR 0002 B104

between the

Type Program No.

Ver.

Remarks

Upgrade

Pack Ver.

FAX BOOT/APL

5JR_5500.B0

2.001 B02.001

BOOT(

B02.001), APL(

B02.001)

ype Program No.

Ver.

Remarks

Upgrade

Pack Ver.

2LC_1A00.001.01

3 001.

013

Service Bulletin Ref. No.

Subject

<Date> April 14 2011

Firmware Upgrade (BOOT/APL Ver.B02.001)

FS-6025MFP_FS-6030MFP_v02.00.0010_(2011-04-11)

(Page.1/2)

5JR-0002 (B104)

Model

(Installation target models: FS-6030MFP, FS-6025MFP, FS-6025MFP/B, FS-C8020MFP and FS-C8025MFP)

FAX System (U)

Topic

The firmware was upgraded as follows.

Content of Changes

No.Item Details

1 Improvement the

connection controller board and FAX board

<FS-6030MFP, FS-6025MFP, FS-6025MFP/B>

MAIN 2K3_2F00.001.504 001.504 MMI 2K3_7000.001.500 001.500 ENGINE 2K3_1000.004.002 004.002 LANGUAGE BR 2K3_81BR.001.004 001.004 For Brazilian Portuguese LANGUAGE KR 2K3_81KR.001.002 001.002 For KMKR * LANGUAGE CN 2K3_81CN001.003 001.003 For KTST * IO 2K3_1E00.001.010 001.010 DP 3M8_9500.003.001 003.001

ESPECIAL ES_SKIP.ON ----------

There was not enough margin to detect the connection between the controller board and FAX board and in case that the condition got worse depending on the variation of the resistance values on the FAX board, system error *CF14A or CF378 might rarely appear. Therefore, the following change was made. [Change] The register setting which is affected by the resistance value on the FAX board was changed in order to improve the margin.

*CF14A/CF378: The error indicated when communication between boards is

disconnected

2K3_V1.04E 1.04

<--New Upgrade

<FS-C8020MFP, FS-C8025MFP>

MAIN 2KZ_2F00.001.504 001.504 MMI 2KZ_7000.001.504 001.504 ENGINE 2K0_1000.002.002 002.002 LANGUAGE BR 2KZ_81BR.001.006 001.006 For Brazilian Portuguese LANGUAGE KR 2KZ_81KR.001.003 001.003 For KMKR * LANGUAGE CN 2KZ_81CN.001.003 001.003 For KTST * IO 2K0_1E00.001.020 001.020

LSU 2K0_1C00.001.012 001.012 DP 3M8_9500.003.001 003.001 FAX BOOT/APL 5JR_5500.B02.001 B02.001 BOOT(B02.001), APL(B02.001)

ESPECIAL ES_SKIP.ON ---------- For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net. When upgrading the firmware or replacing a board, please upgrade each kind of the firmware to the latest version at the same time. *: This firmware is not included in the upgrade pack. Please individually download it from the download center.

2KZ_V1.02E 1.02

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.

CTL Ver.

541776

FAX

<--New Upgrade

Service Bulletin Ref. No.

KMC’s Classification Entire Stock Rework In-Field modification at next visit

Field Measure: No particular problem is expected.

Serial Nos. of the Affected Machines: Planned from the March 2011* production

(Page.2/2)

5JR-0002 (B104)

<Date> April 14 2011

In-Field modification by case No modification necessary

* The above is the plan at the present moment. Please note that this information is subject to change.

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.