Kyocera FS-6025, FS-6030MFP Service Bulletin 2K3 0015 B196 1
Service Bulletin Ref. No.
Subject
Model
This time, the description with (-->) was revised from the previous information.
<Number of changes: 2> The Serial Nos. of the Affected Machines were adde (P-2, P-3).
(Revised Issue 1)
(Page.1/3)
2K3-0015 (B196)
<Date> March 16, 2012
Improvement of the USB Memory Insertion
(Change of the Shape of the USB Host Slot)
FS-6030MFP, FS-6025MFP, FS-6025MFP/B, FS-C8025MFP,
FS-C8020MFP
Topic
The current USB host slot is located at the side of the operation panel and has a difference in depth. Accordingly,
USB memory stick may not be inserted enough and cannot be recognized depending on its shape. Therefore, the
following changes were made.
Contents of Changes
1. The depth difference in the USB host slot was abolished by changing the shape of the COVER OPERATION
LOW.
2. The shape of the MOUNT USB was changed due to the change above.
3. A set of the COVER and the MOUNT was registered in order to secure the compatibility due to the changes 1
and 2 above.
MOUNT USB *1
*2: The USB cable *3 was also changed for procurement ease after this change. The connector size of the new USB cable is
slightly larger, and the size of the USB host slot on the MOUNT USB was also changed.
*3: Not registered as a service part
A
*1: Not registered as a service part
A
USB host slot (7.5x15 -> 9x16) *2
A: Extended by 2 mm so that the USB host slot will be
put forward to the level of the cover.
The USB memory stick with the shape
like the example above cannot be
completely inserted due to the bump.
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.
Q’
Com
bi
pati-
302K305021
Service Bulletin Ref. No.
(Revised Issue 1)
(Page.2/3)
2K3-0015 (B196)
<Date> March 16, 2012
No.
*4: A set of No.2 and the MOUNT USB
Old Part
No.
1 - - - -
2
2K305021
302K394870
302K305022
New Part
No.
2K394870
2K305022
Description
PARTS COVER OPE LOW
SET SP
+COVER OPERATION LOW 1 1
ty
Old New Old New
- 1
lity
- O
X X
Remarks
*4
KMC’s Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure:
Please note that the old type cover is only compatible with the old type MOUNT USB.
Please use the set (No.1) when replacing the old type cover with the new type.
Serial Nos. of the Affected Machines: (-->) Please refer to the tables below.
(-->)
Serial Nos. of the Affected Machines
FS-6030MFP
KMJ KMA 120V CPY KMA GSA KMBR KMA 220V KME UTAX
1102K39JP0 1102K32US0 1102K32CS0 1102K32US1 1102K32BR0 1102K34US0 1102K33NL0 1102K33UT0
Q6P1600659 Q6Q1Z02265 N6S NextPdct NCX NextPdct N8P1600151 N7T1700090 Q6R1502481 N6C1501159
Olivetti KMAUS KTST KMKR KMTW KMHG KMID KMSG
1102K33LV0 1102K33AS0 1102K33KS0 1102K33KR0 1102K3TTW 0 1102K33HK0 1102K33ND0 1102K33SG0
NCY1600350 Q6S1600205 NDJ1601041 N9R1600882 N9S1600081 N931600042 N941700022 N951700113
KMTH Philcopy
1102K33TH0 1102K34PH0
N961600136 NM91900001
FS-6025MFP/FS-6025MFP/b
KMJ KMJ KMA KMA GSA CPY CPY KMA b KMBR
1102L39JP0 1102L39JP1 1102L32US0 1102L32US2 1102L32CS0 1102L32CS1 1102L32US1 1102L32BR0
N671603200 N79 NextPdct N681703421 ND2 NextPdct N6T1X01226 N7V NextPdct N75 NextPdct N8R1600201
KMBR KMA 220V KMA b 220V KME UTAX UTAX Olivetti KME
1102L32BR1 1102L34US0 1102L34US1 1102L33NL0 1102L33UT0 1102L33UT1 1102L33LV0 1102L33NL1
N8S1600141 N7U1900199 N7W NextPdct N691607362 N6B1602209 N781600232 ND31600578 N77 NextPdct
RYAD KMAUS KMAUS KTST KTST b KMKR KMTW KMHG
1102L33RY0 1102L33AS0 1102L33AS1 1102L33KS0 1102L33KS1 1102L33KR0 1102L3TTW0 1102L33HK0
NM31800001 N6A1600278 N76 NextPdct NDL1601361 NG91600501 N9T1600833 N9U1600075 N971600059
KMHG KMID KMID KMSG KMSG KMTH KMTH
1102L33HK1 1102L33ND0 1102L33ND2 1102L33SG0 1102L33SG1 1102L33TH0 1102L33TH1 1102L34PH0
N98 NextPdct N991600080 N9A NextPdct N9B1600237 N9C NextPdct N9D1600159 N9E NextPdct NMB1900001
Philcopy
220V
1102L34PH1
NMC NextPdct
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.
Philcopy
220V
Loading...