(Revised Issue 3) (Page.1/3)
Measures against the Full-page Solid Image or the C3200
Error (Change of the Main Board)
FS-6030MFP, FS-6025MFP, FS-6025MFP/B, FS-C8025MFP,
FS-C8020MFP
KMC’s Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure:
Please replace the main board with the new one when the phenomenon described below appears due to main
board failure.
Serial Nos. of the Affected Machines: Please refer to the next page.
PARTS PWB MAIN ASSY SP
EU
PARTS PWB MAIN ASSY SP
EU
Service Bulletin Ref. No. 2K3-0018 (B292)
<Date> January 8, 2013
This time, the description with (-->) was revised from the previous information.
<Number of changes: 12> The affected serial numbers on the page 2 to 3 were corrected.
The serial numbers of the main PWB were added.
Phenomenon
The full-page solid image is output or the C3200 error (Exposure lamp error) occurs when copying.
Cause
When the digital transistor in the CCD power supply circuit on the main board is damaged and the CCD does not
function, the phenomenon described above might occur.
Corrective Measures
The constant of the digital transistor was changed.
*1: Other than Europe *2: Europe
KYOCERA Document Solutions Europe
Technical Customer Service Division (TCSD)
(Revised Issue 3) (Page.2/3)
NM9
From the next
production
ND2
From the next
production
NMB
From the next
production
N76
From the next
production on.
N7V
From the next
production
N7W
From the next
production
N98
From the next
production
N9C
From the next
production
N9E
From the next
production
NMC
From the next
production
Service Bulletin Ref. No. 2K3-0018 (B292)
<Date> January 8, 2013
Serial Nos. of the Affected Machines
FS-6030MFP
FS-6025MFP
FS-6025MFP/B
KYOCERA Document Solutions Europe
Technical Customer Service Division (TCSD)