Service Bulletin
SB Number:
Subject:
SB 2H9-005
Paper jam at the DP when scanning thick media in duplex
Creation Date: 30/08/2010
Model: FS-1028MFP/1128MFP, DP-110
Phenomenon The paper jam may occur when using the DP to scan thick media in duplex.
Cause This is due to insufcient paper transport force to reverse the paper.
Solution 1. The projections have been added to the paper transport ribs at the cover PF.
The cover PF is a component part of the parts cover PF assy SP and is not available is an
individual part. Therefore please order the parts cover PF assy SP, when replacing the
cover PF.
2. Due to the above mentioned changes the shape of the upper guide B 303LJ24280 has been
changed. Therefore the 11 pieces of the PET lm (Sheet upper guide A/sheet upper guide B)
are no longer necessary, and have been discontinued.
Parts
No. Old Parts
No.
1 - 303LJ94080
2 303LJ24071
3LJ24071
Classication
Field measure When the above mentioned phenomenon occurs, please replace the parts cover PF assy SP and
Serial numbers of affected machines
Type Serial number
FS-1028MFP/DP QUV9Y04037
FS-1128MFP PAV8X02660
New Parts
No.
3LJ94080
303LJ24280
3LJ24280
Entire stock rework
the upper guide B with the latest type at the same time.
Description Q’TY Interchange-
PARTS COVER PF ASSY SP - 1 - X O
UPPER GUIDE B 1 1 X X O
In-eld modication at next visit
Serial numbers of affected units
Type Serial number
DP-110 QRP9Y02801
In-eld modication by case
X
SP
ability
Old New Old New
No modication necessary
Machines produced after the above mentioned
serial numbers, should not have the above mentioned
phenomena.
KMIS Service Department, Kyocera Mita Europe A227 / SB 2H9-005
Units produced after the above mentioned serial
number, should not have the above mentioned
phenomena.
Page 1 of 2
Service Bulletin
DP-110
The shape of the cover PF has been changed
Cross section of the DP-110
Upper guide
Cover PF
Paper feed path
PET lm
Old condition
New condition
Added projection
The PET lm (11 pieces ) at the upper guide B 303LJ24280 has been discontinued and the shape of the guide has
been changed.
Old condition New condition
PET lm The shape has been changed
KMIS Service Department, Kyocera Mita Europe A227 / SB 2H9-005
Page 2 of 2