Kyocera DF-780 SERVICEBULLETINS

Service Bulletin

SB Number:

Subject:

SB DF-074

Firmware upgrade (Error code after sleep mode recovery)

Creation Date: 23/06/2010

Model: DF-780/780(B)

Affected models: TASKalfa250ci/300ci/400ci/500ci/300i/420i/520i/552ci

Item Contents

1 Error code C8360 Error code C8360 (Slide motor error) may occur during sleep mode recovery, when pressing

the start key after a stapling job has been cancelled.

2 Paper stack

adjustment failure

Phenomenon

Paper stack adjustment failure may occur, when stapling the A4 sized paper stack.

Cause

The corner of the rear edge of the paper stack may contact the inside wall of the staple unit.

Solution

The paper stack passing position has been relocated 4 mm to the machine rear side.
Please replace the PBA-control-KM with the latest type to implement the solution.

Firmware

Type Program No. Check SUM Version

DF-780/780B (1000) 5JA_9200.007.005 66ED 007.005

Parts

No. Old Parts

No.

1 305JA71604

5JA71604

Classication

Field measure When the above mentioned phenomena occur, please upgrade the rmware to the latest version.

Serial numbers of affected machines

Type Serial number

DF-780/780(B) Not available

New Parts
No.

305JA71605
5JA71605

Entire stock rework

To improve the paper stack adjustment, please replace the PBA-control-KM with the latest type.

Description Q’TY Interchange-

ability

Old New Old New

PBA-CONTROL-KM 1 1 O O O

In-eld modication at next visit

In-eld modication by case

X

No modication necessary

SP

KMIS Service Department, Kyocera Mita Europe A078 / SB DF-074

Page 1 of 1