Kyocera DF-710, DF-730 Service Bulletin 3JY 002a
Service Bulletin
SB Number:
SB 3JY-002
Creation Date: 11/02/2008
Subject: Firmware change, new model support
Model: DF-710/730, DP-710
The rmware for DF-710 and DP-710 has been changed to support KM-C4035E.
The rmware for DF-730 has been changed to support KM-2560/3060/2540/3040 and KM-C4035E.
NOTE:
The below table describes the compatibility between current and new machines/accessories.
The newer DF-710/730 and DP-710 are compatible with the KM-C4035E.
Compatible with present model Support for new model
Main body to
which it can be installed
Label on the
outer carton
Item code:
KM-C2520/C3225/C3232
KM-C2525E/C3232E
DF-710 DF-730 DP-710 DF-710 DF-730 DP-710
1203JY3UT0 1205H13UT0 1203J93UT0 1203JY3U10 1205H13U10 1203J93U10
KM-C4035E
DF 730 supports KM-2560/3060/2540/3040.
DF-710
No. Old Parts
No.
1 303JY01022
3JY01022
2 303JY80014
3JY80014
DP-710
No. Old Parts
No.
1 303J901011
3J901011
DF-730
No. Old Parts
No.
1 305H180020
5H180020
New Parts
No.
303JY01023
3JY01023
303JY80015
3JY80015
New Parts
No.
303J901012
3J901012
New Parts
No.
305H180021
5H180021
Description Q’ty Interchange
ablity
Old New Old New
MIDDLE PWB ASS’Y 1 1 X O 3JY_9600.004.002
MAIN PWB ASS’Y WITH
SOFTWARE SP
Description Q’ty Interchange
DRIVER PWB ASS’Y 1 1 X O 3J9_9500.004.005
Description Q’ty Interchange
PBA-CONT-F 1 1 X O 5H1_9200.002.007
1 1 X O 3JY_9200.006.003
ablity
Old New Old New
ablity
Old New Old New
Firmware version.
Firmware version.
Firmware version.
KMIS Service Department, Kyocera Mita Europe 8095 / SB 3JY-002
Page 1 of 2
Affected machine serial numbers
Model Item code Start serial number
DF-710 1203JY0U10 PRA7508105 and higher
1203JY3U10 PNP7502090 and higher
DF-730 1205H10U10 URF7412474 and higher
PRK******1 and higherand higher
1205H13U10 UNN******1 and higher
PNX******1 and higherand higher
DP-710 1203J95J10 PVM7507511 and higher
1203J90K10 PAQ7517537 and higher
1203J93U10 PNN7503761 and higher
Contents of changes in rmware
Model Item Contents
1 DF-710
DF-730
DP-710
2 DF-710 The timing of paper holding solenoid
3 DF-710 Method to prevent JAM 88
4 DP-710 The paper feeding timing when using
Support for KM-C4035E. Changed the conveying speed.
In order to reduce the sound of the paper holding lever hitting
has been adjusted.
(Main tray eject JAM).
the Auto select function has been
changed.
the main tray, the operation timing of the paper holding solenoid
has been changed.
There is a possibility that JAM88 might occur when copying 3
sheets monochrome A4 copies with 2 staples continuously.
When using the Auto select function, there is a possibility that
small sized originals are detected as large sized originals and
the copy image is printed half on the large sized paper.
Service Bulletin
KMIS Service Department, Kyocera Mita Europe 8095 / SB 3JY-002
Page 2 of 2
Loading...