Additional Important Information
For SP2 Musician's Guide
Saving Programs
When saving a program with a new/different effect, you will be prompted to overwrite the original program with the newly edited program. The display will show the program number followed by a question mark. Select the [+/Yes] button to store the new program. (Note: This will overwrite the factory program.) The original programs can be restored by performing a reset in the global menu. Warning: Performing a reset from the global menu will restore all factory programs and erase any changes you have made as well as any programs you have stored in the Quick Access bank.
Upgrading The SP2 Software
Windows Users
Please follow the instructions beginning on page 2-7 titled “ Connecting to a computer via USB.” You do not need a MIDI interface in order to upgrade the software. Next, proceed to chapter 6 (page 6-2) and follow the instructions titled “Installing Software Upgrades.” We suggest using Windows Media Player to perform the software upgrade. You can get the latest version of Windows Media Player at: http://www.microsoft.com/windows/windowsmedia/download
Macintosh Users
At this time, USB functionality is not supported with this version of the operating system. Therefore, it is not possible to install the software upgrade via USB. We are working diligently to provide a solution to this problem. For now you must use a MIDI interface which can be connected to your Mac via USB, but must be connected to your SP2 via the MIDI In jack. After the SP2 is connected to your Mac, please follow the instructions on page 6-2 titled “Installing Software Upgrades.” Note: On step 7, disregard the reference to Windows Media Player. Please visit our website at: http://www.KurzweilMusicSystems.com for the latest news and updates.
Rev A – July 11, 2007
Loading...